The glass fibre-polymer interface: II—Work of fracture and shear stresses

Pull-out experiments have been carried out on single production fibres under carefully controlled conditions. Four parameters were determined. The interfacial yield stresses, of about 9–14 MPa, were very much smaller than the shear strengths of the bulk polymers in the case of an epoxy, whether post-cured or not, and a non-post-cured polyester. Values for the work of fracture of the interface varied from 140 to 300 Jm^?2, and again were less than those of the polymer. Interface failure sometimes took place in the epoxy rather than at the fibre surface, whereas with the polyester it always took place at the fibre surface. After interface failure, pull-out was governed by friction, with maximum shear stresses of 7–10 MPa for polyester, and 21–34 MPa for epoxy, the higher values being obtained for the post-cured resins. Average frictional shear stresses were sometimes less than a half of the maximum shear stress, indicating that the fibre Poisson's shrinkage was playing an important role in the pull-out process. A silicone release agent reduced the frictional shear stresses to 2·5 MPa, with both resins.     

Location of structural sections from within a highly distorted complex line drawing

Complex and highly distorted line drawings are produced by subjects attempting the Rey Complex Figure test, a clinical test of neuropsychological assessment. However, the marking scheme conventionally employed can be subjective and unreliable. In this paper, the first stages in automating this scoring system are investigated using a robust technique to locate a reduced set of scoring sections and a knowledge-based system that employs spatial metrics and fuzzy approximation techniques. Testing the technique using clinical data produced encouraging results that support the argument that this is a feasible approach for implementing a fully automated system, and that in its current state, can be immediately applied in a semi-automated system.     

On the mechanics of large inelastic deformations: noncoaxiality,axial effects in torsion and localization

Summary The macroscopic behavior of materials subjected to large deformations is investigated by considering the structure and mechanics of the single slip. Physically based constitutive relations for the plastic flow and material spin are then rigorously derived by resorting to the concept of non-coaxiality; yielding a class of vertex-type plasticity models incorporating features like noncoaxiality and large material rotation. It is shown that these phenomena are inherently coupled through the concept of plastic spin as it relates to the persistence of noncoaxiality. The implication of such phenomena to large deformations is investigated by examining their influence on the development of axial effects accompanying finite shear deformation, as well as on the onset of localized shear bands.     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

Elastic effects in the flow of polymer solutions in channels of variable cross section and a porous medium

The manifestation of elastic effects during the filtration of polymer solutions is analyzed theoretically.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 3, pp. 390–397, September, 1985.     

Compact implementation of high-performance CMOS current mirror

A high-performance compact current mirror implementation with very low input resistance, very high output resistance, high copying accuracy, low input and output voltage supply requirements and high bandwidth is proposed. The circuit characteristics are validated with simulations in 0.5 /spl mu/m CMOS technology and with experimental results.     

Architecture and algorithms for tracking football players with multiple cameras

A system architecture and method for tracking people is presented for a sports application. The system input is video data from static cameras with overlapping fields-of-view at a football stadium. The output is the real-world, real-time positions of football players during a match. The system comprises two processing stages, operating on data from first a single camera and then multiple cameras. The organisation of processing is designed to achieve sufficient synchronisation between cameras, using a request-response pattern, invoked by the second stage multi-camera tracker. The single-view processing includes change detection against an adaptive background and image-plane tracking to improve the reliability of measurements of occluded players. The multiview process uses Kalman trackers to model the player position and velocity, to which the multiple measurements input from the single-view stage are associated. Results are demonstrated on real data.