Scratch testing of metals and polymers: Experiments and numerics

An experimental and numerical study of the scratch test performed on metals and polymers was conducted. The materials tested, being both metallic and polymeric, were related to the well known Johnson’s parameter, often used to correlate indentation experiments. The aim was to determine whether it was possible to use the numerical approach presented by Wredenberg and Larsson [F. Wredenberg, P.-L. Larsson, On the numerics and correlation of scratch testing, Journal of Mechanics of Materials and Structures 2 (2006) 573–594] to describe the scratch mechanism and of course also to investigate whether or not important scratch quantities can be determined with sufficient accuracy from standard scratch experiments.     

Pre-Compensation for Rayleigh Fading Channels in Time Division Duplex OFDM Systems

Coherent demodulation results in good detection performance but requires channel estimation. Fading pre-compensation (precoding) at the transmitter can lead to low-complex receiver structures with good performance capabilities, without the need for channel estimation. Time division duplex systems based on orthogonal frequency division multiplex (OFDM) are particularly suited to this because intersymbol interference effects can be neglected, simplifying transmitter adjustments. Methods that involve amplitude and/or phase pre-compensation are compared in terms of resulting bit error rate and increase in peak-to-average power ratio. Dynamic channels degrade the performance as the block lengths get longer. For a certain block length the performance degrades below that of traditional differential decoding. A block length of up to 40 times that used in the Digital European Cordless Telephone system, DECT, is possible using channel estimation and ideal Wiener prediction.     

The influence of porous silicon on axonal outgrowth in vitro.

xonal outgrowth on smooth and porous silicon surfaces was studied in organ culture. The pore size of the silicon substrata varied between 100 and 1500 nm. We found that axons preferred to grow and elongate on porous silicon surfaces only when pores of (150-500 nm) are available.     

Impact of chloride on the mineralogy of hydrated Portland cement systems

Chloride ion is in part bound into ordinary Portland cement paste and modifies its mineralogy. To understand this a literature review of its impacts has been made and new experimental data were obtained. Phase pure preparations of Friedel's salt, Ca₄Al₂(Cl)_1.95(OH)_12.05·4H₂O, and Kuzel's salt, Ca₄Al₂(Cl)(SO₄)_0.5(OH)₁₂·6H₂O, were synthesized and their solubilities were measured at 5, 25, 55 and 85 °C. After equilibration, solid phases were analysed by X-ray diffraction while the aqueous solutions were analysed by atomic absorption spectroscopy and ion chromatography. The solid solutions and interactions of Friedel's salt with other AFm phases were determined at 25 °C experimentally and by calculations. In hydrated cements, anion sites in AFm are potentially occupied by OH, SO₄ and CO₃ ions whereas Cl may be introduced under service conditions. Chloride readily displaces hydroxide, sulfate and carbonate in the AFm structures. A comprehensive picture of phase relations of AFm phases and their binding capacity for chloride is provided for pH ∼ 12 and 25 °C. The role of chloride in AFt formation and its relevance to corrosion of embedded steel are discussed in terms of calculated aqueous [Cl⁻]/[OH⁻] molar ratios.     

Advanced mercury removal from gold leachate solutions prior to gold and silver extraction: a field study from an active gold mine in Peru

Mercury contamination in the Gold-Cyanide Process (GCP) is a serious health and environmental problem. Following the heap leaching of gold and silver ores with NaCN solutions, portions of the mercury-cyano complexes often adhere to the activated carbon (AC) used to extract the gold. During the electrowinning and retorting steps, mercury can be (and often is) emitted to the air as a vapor. This poses a severe health hazard to plant workers and the local environment. Additional concerns relate to the safety of workers when handling the mercury-laden AC. Currently, mercury treatment from the heap leach solution is nonexistent. This is due to the fact that chelating ligands which can effectively work under the adverse pH conditions (as present in the heap leachate solutions) do not exist. In an effort to economically and effectively treat the leachate solution prior to passing over the AC, a dipotassium salt of 1,3-benzenediamidoethanethiol (BDET2-) has been developed to irreversibly bind and precipitate the mercury. The ligand has proven to be highly effective by selectively reducing mercury levels from average initial concentrations of 34.5 ppm (parts per million) to 0.014 ppm within 10 min and to 0.008 ppm within 15 min. X-ray powder diffraction (XRD), proton nuclear magnetic resonance (1H NMR), Raman, and infrared (IR) spectroscopy demonstrate the formation of a mercury-ligand compound, which remains insoluble over pH ranges of 0.0-14.0. Leachate samples from an active gold mine in Peru have been analyzed using cold vapor atomic fluorescence (CVAF) and inductively coupled plasma optical emission spectroscopy (ICP-OES) for metal concentrations before and after treatment with the BDET2- ligand.     

Characterisation of submicron particles produced during oxygen blown entrained flow gasification of biomass

In this paper submicron particles sampled after the quench during 200 kW, 2 bar(a) pressurised, oxygen blown gasification of three biomass fuels, pure stem wood of pine and spruce, bark from spruce and a bark mixture, have been characterised with respect to particle size distribution with a low pressure cascade impactor. The particles were also characterised for morphology and elemental composition by a combination of scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) and high resolution transmission electron microscopy/energy dispersive spectroscopy/selected area electron diffraction pattern (HRTEM/EDS/SAED) techniques. The resulting particle concentration in the syngas after the quench varied between 46 and 289 mg/Nm³ consisting of both carbon and easily volatile ash forming element significantly depending on the fuel ash content. Several different types of particles could be identified from classic soot particles to pure metallic zinc particles depending on the individual particle relation of carbon and ash forming elements. The results also indicate that ash forming elements and especially zinc interacts in the soot formation process creating a particle with shape and microstructure significantly different from a classical soot particle.     

Cost-effective energy carriers for transport – The role of the energy supply system in a carbon-constrained world

The aim of this study is to examine how the options for producing electricity, fuels, and heat in a carbon-constrained world affect the cost-effectiveness of a range of fuels and propulsion technologies in the transportation sector. GET 7.0, a global energy system model with five end-use sectors, is used for the analysis. We find that an energy system dominated either by solar or by nuclear tends to make biofuels in plug-in hybrids cost-effective. If coal with carbon capture and storage (CCS) dominates the energy system, hydrogen cars, rather than plug-in hybrids tend to become cost-effective. Performing a Monte Carlo simulation, we then show that the general features of our results hold for a wide range of assumptions for the costs of vehicle propulsion technologies (e.g., batteries and fuel cells). However, sufficiently large changes in say the battery costs may overturn the impact of changes in the energy supply system, so that plug-in hybrid vehicles become cost-effective even if coal with CCS dominate the energy supply. We conclude that analyses of future energy carriers and propulsion technologies need to consider developments in the energy supply system.     

Detailed 3D human body reconstruction from multi-view images combining voxel super-resolution and learned implicit representation

Applied Intelligence - The task of reconstructing detailed 3D human body models from images is interesting but challenging in computer vision due to the high freedom of human bodies. This work...     

Preclinical Evaluation of 99mTc-ZHER2:41071, a Second-Generation Affibody-Based HER2-Visualizing Imaging Probe with a Low Renal Uptake

Radionuclide imaging of HER2 expression in tumours may enable stratification of patients with breast, ovarian, and gastroesophageal cancers for HER2-targeting therapies. A first-generation HER2-binding affibody molecule [^99mTc]Tc-ZHER2:V2 demonstrated favorable imaging properties in preclinical studies. Thereafter, the affibody scaffold has been extensively modified, which increased its melting point, improved storage stability, and increased hydrophilicity of the surface. In this study, a second-generation affibody molecule (designated ZHER2:41071) with a new improved scaffold has been prepared and characterized. HER2-binding, biodistribution, and tumour-targeting properties of [^99mTc]Tc-labelled ZHER2:41071 were investigated. These properties were compared with properties of the first-generation affibody molecules, [^99mTc]Tc-ZHER2:V2 and [^99mTc]Tc-ZHER2:2395. [^99mTc]Tc-ZHER2:41071 bound specifically to HER2 expressing cells with an affinity of 58 ± 2 pM. The renal uptake for [^99mTc]Tc-ZHER2:41071 and [^99mTc]Tc-ZHER2:V2 was 25–30 fold lower when compared with [^99mTc]Tc-ZHER2:2395. The uptake in tumour and kidney for [^99mTc]Tc-ZHER2:41071 and [^99mTc]Tc-ZHER2:V2 in SKOV-3 xenografts was similar. In conclusion, an extensive re-engineering of the scaffold did not compromise imaging properties of the affibody molecule labelled with ^99mTc using a GGGC chelator. The new probe, [^99mTc]Tc-ZHER2:41071 provided the best tumour-to-blood ratio compared to HER2-imaging probes for single photon emission computed tomography (SPECT) described in the literature so far. [^99mTc]Tc-ZHER2:41071 is a promising candidate for further clinical translation studies.     

The effect of a local mesh refinement on hydraulic modelling of river meanders

Large-scale river models are generally discretized by relatively large mesh cells resulting in bathymetry discretization errors and numerical effects. These hydraulic models are generally calibrated by altering the bed roughness to compensate for these errors and effects. Consequently, the calibrated roughness values are mesh-dependent while generally local mesh refinements are executed after model calibration to study the effects of river interventions. This study shows both the errors caused by bathymetry discretization and numerical effects for locally refined meshes. First, schematised river meanders with a flat bed in the transverse flow direction are analysed to isolate the induced numerical effects by the mesh. Afterwards, a case study is considered to verify if similar mesh influences are found in natural river meanders. Curvilinear, triangular and hybrid (combination of curvilinear and triangular cells) meshes are used with different resolutions. The analysis shows that in the schematised river meanders lower depth-averaged flow velocities and larger water depths are simulated with coarser meshes. In the case study, substantial differences in hydrodynamics between the meshes are obtained suggesting that the bathymetry discretization is more influential than the numerical effects. Finally, it was found that triangular meshes, and rivers with narrow meander bends, are most sensitive to mesh resolution. Especially in these cases, it is desirable to refine the mesh at the desired locations before model calibration.