On-machine wire electrical discharge dressing (WEDD) of metal-bonded grinding wheels

Traditional multivariate control charts such as Hotelling’s χ ² and T ² control charts are designed to monitor vectors of variable quality characteristics. However, in certain situations, data are expressed in linguistic terms and, under these circumstances, variable or attribute multivariate control charts are not suitable choices for monitoring purposes. Fuzzy multivariate control charts such as fuzzy Hotelling’s T ² could be considered as efficient tools to overcome the problems of linguistic observations. The purpose of this paper is to develop a fuzzy multivariate exponentially weighted moving average (F-MEWMA) control chart. In this paper, multivariate statistical quality control and fuzzy set theory are combined to develop the proposed method. Fuzzy sets and fuzzy logic are powerful mathematical tools for modeling uncertain systems in industry, nature, and humanity. Through a numerical example, the performance of the proposed control chart was compared to the fuzzy Hotelling’s T ² control chart. Results indicate uniformly superior performance of the F-MEWMA control chart over Hotelling’s T ² control chart.     

The effective hydrodynamic radius of single DNA-grafted colloids as measured by fast Brownian motion analysis

Optical tweezers accomplished with fast position detection enable one to carry out Brownian motion analysis of single DNA-grafted (grafting density: ∼1000 molecules per particle, molecular weight: 4000 bp) colloids in media of varying NaCl concentration. By that the effective hydrodynamic radius of the colloid under study is determined and found to be strongly dependent on the conformation of the grafted DNA chains. Our results compare well both with recent measurements of the pair interaction potential between DNA-grafted colloids (Kegler et al. Phys Rev Lett 2008; 100:118302) and with microfluidic studies (Gutsche et al. Microfluid Nanofluid 2006; 2:381-386). The observed scaling of the brush height with the ion concentration is in full accord with the theoretical predictions by Pincus, Zhulina, Birshtein and Borisov.     

Complexing agent assisted synthesis of high aspect ratio Fe3 +/Mg2 + layered double hydroxides

A new, facile synthesis for Fe^3 +/Mg^2 + LDHs is developed and investigated. The crucial feature of the synthesis is the usage of a complexing agent (diethylenetriamine, DETA) to increase the solubility of iron phases precipitated intermediately. The influences of different synthesis parameter like DETA concentration, pH value, and temperature are investigated. The optimized synthesis route yields high aspect ratio Fe^3 +/Mg^2 + LDHs which are expected to be interesting filler materials for flame retardant nanocomposites.     

Spiral-CT-based assessment of tracheal stenoses using 3-D-skeletonization

PURPOSE: Demonstration of a technique for three-dimensional (3-D) assessment of tracheal-stenoses, regarding site, length and degree, based on spiral computed tomography (S-CT). PATIENTS AND METHODS: S-CT scanning and automated segmentation of the laryngo-tracheal tract (LTT) was followed by the extraction of the LTT medial axis using a skeletonization algorithm. Orthogonal to the medial axis the LTT 3-D cross-sectional profile was computed and presented as line charts, where degree and length was obtained. Values for both parameters were compared between 36 patients and 18 normal controls separately. Accuracy and precision was derived from 17 phantom studies. RESULTS: Average degree and length of tracheal stenoses was found to be 60.5% and 4.32 cm in patients compared with minor caliber changes of 8.8% and 2.31 cm in normal controls (p < 0.0001). For the phantoms an excellent correlation between the true and computed 3-D cross-sectional profile was found (p < 0.005) and an accuracy for length and degree measurements of 2.14 mm and 2.53% respectively could be determined. The corresponding figures for the precision were found to be 0.92 mm and 2.56%. CONCLUSION: LTT 3-D cross-sectional profiles permit objective, accurate and precise assessment of LTT caliber changes. Minor LTT caliber changes can be observed even in normals and, in case of an otherwise normal S-CT study, can be regarded as artifacts.     

Finite element analysis of a polymer composite subjected to a sliding steel asperity Part I Normal fibre orientation

FE micro-models have been developed in order to determine contact, stress and strain conditions produced by a steel asperity sliding on the surface of a normally oriented fibre-reinforced polymer composite. A displacement coupling technique was introduced to model a micro-environment as part of a macro-environment and to get more realistic simulation results about the failure conditions in the composite structure, in comparison to the so far widely applied anisotropic analytical or numerical macro-models. On the basis of the results, conclusions may be drawn for the possible wear mechanisms of the fibre-reinforced polymer composite. Stress results in the vicinity of the fibers in the contact area show high shear loading of the matrix leading to the formation of stretched-out matrix wear debris. In addition, high repeated compression-tension stresses at the fibre/matrix interface near the surface can lead to fibre debonding phenomena. Considering the fibre ends in the contact region, high compression stresses at their rear edges can produce fibre cracking features. To study the wear mechanisms experimentally, a single asperity scratch test was also performed showing shear failure events of the polymer matrix, fibre/matrix debonding and fibre cracking effects, as expected from the modelling studies.     

Balance of power: dynamic thermal management for Internet data centers

Internet-based applications and their resulting multitier distributed architectures have changed the focus of design for large-scale Internet computing. Internet server applications execute in a horizontally scalable topology across hundreds or thousands of commodity servers in Internet data centers. Increasing scale and power density significantly impacts the data center's thermal properties. Effective thermal management is essential to the robustness of mission-critical applications. Internet service architectures can address multisystem resource management as well as thermal management within data centers.     

Low-threshold room-temperature operation of injectorless quantum-cascade lasers: influence of doping density

The influence of the doping density in the active sections of InP-based injectorless quantum cascade lasers, emitting at 6.8 mum, is investigated. The doping sheet density is varied in the range 2.5-8.6times10¹⁰ cm^-2. Lasing is observed in the whole range, with a threshold current density as low as 1.2 kA/cm² at 300 K for the smallest doping sheet density of 2.5times10 ¹⁰ cm^-2. Further improvement has been made by additionally increasing the number of periods in the active region from 40 to 60. With the same doping level of 2.5times10¹⁰ cm^-2 record low threshold current densities of 0.73 kA/cm² at 300 K were achieved     

Applications of specialized coils for high-resolution MRI on a whole-body scanner

To investigate the application of a mini-coil surface system for high-resolution MRI, 60 volunteers were examined in a 1.5-T whole-body scanner. Two replaceable probe heads were available: a circular 2.5-cm coil and a quadratic 5-cm coil, both of which were placed directly on the skin. The skin layers, Achilles tendon and finger joints were examined with the 2.5-cm coil and a FOV of 25 × 25 mm². A matrix of 256 × 256 pixels resulted in a pixel size of 0.098 × 0.098 mm². For imaging of the carpal tunnel, the 5-cm coil was used in transverse orientation. The FOV was 50 × 50 mm² so that a matrix of 256 × 256 pixels led to a pixel size of 0.195 × 0.195 mm². The resulting spatial resolution permitted visualization of the epidermis, dermis and subcutis, resulting in clear definition of anatomical detail of the musculoskeletal system. MRI measurement of skin-layer thickness did not correlate with histometric data (p<0.05). This discrepancy was due in part to shrinkage of the tumor specimen on histologic preparation. Other causes include the motion artifacts and the limited accuracy of determining thickness on the MRI display unit.