Phase Equilibrium Investigations on Na–K–(β+β")-Alumina

The activities of Na₂O and K₂O dissolved in mixed-alkali Na–K–(β+β")-Al₂O₃ (NKBA) have been determined by using yttria stabilized zirconia (YSZ) as a solid electrolyte in the following galvanic cells: The approach enables to verify in situ the establishment and maintenance of the β/β"-equilibrium, and to characterize it as a function of the phase composition of NKBA. The results can be expressed as follows:      

Reversible electrochemical insertion of anions in poly-p-phenylene from aqueous electrolytes

Poly-p-phenylene (PPP) was synthesized from benzene according to the Kovacic method. Electrodes were made from this electronic insulator by cold- or hot-pressing of the loose, brown powder, under the addition of 7.5 wt. % soot (Corax L^®, Degussa AG). The electrochemical insertion and removal of anions HSO⁻₄, ClO⁻₄ in this material in aqueous solutions of the corresponding acids was investigated by slow cyclic voltammetry.

Initially, only a surface layer of about 0.1 mm thickness takes part in the electrochemical processes, which are reversible. A maximum concentration of anions in the solid of [(−C₆H₄−)⁺₇ A⁻] is attainable. The maximum degree of insertion is equal to 0.14. The insertion potential U_I shifts strongly into the negative direction with increasing concentration c of the acid. A linear U_I/c relationship is observed as in the case of graphite, where the intercalation potential is more positive by 20–200 mV for the same electrolyte. The round trip current efficiency for the insertion/removal cycle increases with increasing acid concentration attaining 100% in 14 M H₂SO₄ or 11.3 M CHlO₄. For a given concentration, increases in the same order as with graphite (H₂SO₄ < HClO₄ < HBF₄), being somewhat lower for a given electrolyte composition. From anodic current limitation (j_lim = 5–10 mA cm⁻²), a diffusion coefficient of about D = 2 × 10⁻⁷ cm² s⁻¹ is derived for the transport of anions in the bulk of PPP. The striking similarity of our results to former findings with graphite is thoroughly discussed. Some general conclusions are derived thereof.     

Electrochemical oxidation analysis for dressing bronze-bonded diamond grinding wheels

Electrochemical dressing of fine-grained metal-bonded diamond grinding wheels enables to grind hard and brittle materials in the ductile mode. Optical surfaces can be manufactured by grinding, which reduces the need for subsequent, time-consuming polishing work. When using metal-bonded grinding wheels, the emerging oxides regulate the electrochemical dissolution. Bronze-bonded grinding wheels are more suitable for grinding cemented carbides and ceramics than iron-bonded grinding wheels, as it is easier to modify their chemical composition to suit a specific grinding task. They can also be sintered at lower temperatures, which reduces the risk of thermal damage to the diamond. In this paper, the dissolution and the oxidation of different bronze alloys are characterized for the electrochemical dressing process. The relevant evaluation criteria are the oxide layer thickness, the electrical behavior and the different emerging bronze alloy oxides. This work is funded by the German Research Association DFG within the Transregional Collaborative Research Center SFB/TR4 “Process Chains for the Replication of Complex Optical Elements”.     

Using Amorphous Phases in the Design of Structural Alloys

The recent discovery that amorphous alloy powders can be prepared by mechanically alloying a mixture of pure crystalline intermetallics is opening new windows to the synthesis of engineering materials. Amorphous powders synthesized by mechanical alloying may find application in the design of structural alloys, high thermal conductivity alloys, and metal-matrix composites.     

The Growth of the Third-Party Maintenance Industry

Abstract

Beginning as an innovative idea in the early 1970s, the third-party maintenance industry realized revenues in 1986 of $1.4 billion. This flourishing industry offers opportunities for vendors and customers alike.     

Job-shop scheduling in a body shop

We study a generalized job-shop problem called the body shop scheduling problem (BSSP). This problem arises from the industrial application of welding in a car body production line, where possible collisions between industrial robots have to be taken into account. BSSP corresponds to a job-shop problem where the operations of a job have to follow alternating routes on the machines, certain operations of different jobs are not allowed to be processed at the same time and after processing an operation of a certain job a machine might be unavailable for a given time for operations of other jobs. As main results we will show that for three jobs and four machines the special case where only one machine is used by more than one job is already $\mathcal NP $ -hard. This also implies that the single machine scheduling problem that asks for a makespan minimal schedule of three chains of operations with delays between the operations of a chain is $\mathcal NP $ -hard. On the positive side, we present a polynomial algorithm for the two job case and a pseudo-polynomial algorithm together with an FPTAS  for an arbitrary but constant number of jobs. Hence for a constant number of jobs we fully settle the complexity status of the problem.     

Interactive survival analysis with the OCDM system: From development to application

Medical data mining is currently actively pursued in computer science and statistical research but not in medical practice. The reasons therefore lie in the difficulties of handling and statistically analyzing medical data. We have developed a system that allows practitioners in the field to interactively analyze their data without assistance of statisticians or data mining experts. In the course of this paper we will introduce data mining of medical data and show how this can be achieved for survival data. We will demonstrate how to solve common problems of interactive survival analysis by presenting the Online Clinical Data Mining (OCDM) system. Thereby the main focus is on similarity based queries, a new method to select similar cases based on their covariables and the influence of these on their survival.     

Characterization of laser hardened steels by laser induced ultrasonic surface waves

Ultrasonic surface waves are suitable for the characterization of surface hardened materials. This is shown on laser hardened turbine blades. The martensitic microstructure within the surface layer of surface hardened steels has a lower surface wave propagation velocity than the annealed or normalized substrate material. Because the propagation velocity depends on the ratio of layer thickness to wavelengthd/, its measurement allows the determination of the hardening depth. If the surface wave frequency is high enough, the surface wave propagates mainly within the hardened layer. A correlation of the surface wave velocity to the surface hardness has been found. Because the variation of the surface velocity in hardened steels is small, a high measurement accuracy is necessary to obtain the interesting hardening parameters with sufficient certainty. Therefore, a measuring arrangement has been developed where laser pulses, guided by optical fibers to the surface hardened structure, generate simultaneously surface wave pulses at two different positions. The two ultrasonic pulses are received by a piezoelectric transducer. The surface wave velocity is obtained from the time delay between these pulses which is determined by the cross-correlation method. To evaluate simultaneously surface waves with different penetration depths from the same signal acquisition, digital filtering has been used in connection with the cross-correlation.