Grafting maleic anhydride onto EVA and effect on the physical and rheological properties of PETG/EVA-g-MAH blends

Maleic anhydride (MAH) was grafted onto ethylene vinyl acetate copolymer (EVA) in the internal mixer in the presence of dicumyl peroxide (DCP), and a prepared reactive compatibilizer, MAH-g-EVA, was blended with Poly (ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) (PETG). The gel content determination and element analysis (EA) was performed to confirm the grafting reaction. It was found that grafting reaction of MAH on to EVA could compete with crosslinking reaction of DCP during the modification process. In addition, the introduction of small amount of MAH showed a great effect on reducing gel content by decreasing crosslink reaction. As MAH content increased, grafted MAH concentration increased, whereas the grafting yield decreased. It was also confirmed that MAH-g-EVA acted as a reactive compatibilizer in the blend with PETG, and enhanced compatibility by reacting with the hydroxyl end groups, OH, of PETG. Addition of EVA in the blend leads a plastic deformation of PETG, and MAH had a great effect on enhancing interfacial adhesion resulting in significant increasing of % strain; however, improved compatibility could not be changed much in low strain tensile strength and Young's modulus. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The production of a cellular graphene array by scanning probe lithography and its ability to store electrical charge

A graphene cellular array on an insulating SiO₂ layer was fabricated by scanning probe lithography. The graphene layer was oxidized by an electric field which was applied between the cantilever tip and Si substrate without any electrode directly connected to the graphene layer. When the bias voltage was applied on a cell of patterned graphene through the cantilever tip, charge was accumulated on the cell and preserved for a long time without decay. The accumulated charge and the surface potential were measured by an electrostatic force microscope. The charge retention was measured as a function of time, and the decay time constant was estimated to be ～70 min.     

Three-dimensional Petersen-torus network: a fixed-degree network for massively parallel computers

A two-dimensional (2D) Petersen-torus network is a mesh-class fixed-degree network designed using a Petersen graph, which has a maximum of 10 nodes when the degree is 3 and the diameter is 2 in a (d,k)-graph problem. Here, I propose a new three-dimensional (3D) Petersen-torus network that extends the 2D Petersen-torus network without increasing the degree. The 3D Petersen-torus has the same number of nodes (N). The 3D Petersen-torus is better than the well-known 3D torus and 3D honeycomb mesh in terms of diameter and network cost. The 3D Petersen-torus network is better than the hypercube-like and star graph-like networks in terms of extendibility. Hence, the proposed network may serve as the foundation for realizing a high-performance multicomputer. In this paper, the optimal routing algorithm, Hamilton cycle, and several basic attributes are discussed. Furthermore, a comparison with a mesh-class fixed-degree 3D network is made for degree, diameter, and network cost.     

Inverted organic photovoltaic device with a new electron transport layer

We demonstrate that there is a new solution-processed electron transport layer, lithium-doped zinc oxide (LZO), with high-performance inverted organic photovoltaic device. The device exhibits a fill factor of 68.58%, an open circuit voltage of 0.86 V, a short-circuit current density of −9.35 cm/mA² along with 5.49% power conversion efficiency. In addition, we studied the performance of blend ratio dependence on inverted organic photovoltaics. Our device also demonstrates a long stability shelf life over 4 weeks in air.