准最佳二进阵列偶

本文在最佳二进阵列、准最佳二进阵列和最佳二进阵列偶的基础上,定义了一种新的最佳信号,即准最佳二进阵列偶.讨论了准最佳二进阵列偶的体积、变换性质,并对其进行了Fourier频谱分析,得到了部分有益的结果.还用计算机穷举搜索出了体积从2~24的准最佳二进阵列偶.     

污垢对冷水机组的影响

通过对两个工程实例的冷水机组测试结果对比分析，得出污垢对冷水机组造成了热阻增加，接热效果变差，制冷量减少以及制冷效率下降等严重后果，并推算出机组由此所带来的运行费用的增加。运行管理人员应该注意对机组加强清洗保养工作，以提高机组的经济运行水平。     

Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks

UWB technology provides an excellent means for wireless positioning due to its high resolution capability in the time domain. Its ability to resolve multipath components makes it possible to obtain accurate location estimates without the need for complex estimation algorithms. In this article, theoretical limits for TOA estimation and TOA-based location estimation for UWB systems have been considered. Due to the complexity of the optimal schemes, suboptimal but practical alternatives have been emphasized. Performance limits for hybrid TOA/SS and TDOA/SS schemes have also been considered. Although the fundamental mechanisms for localization, including AOA-, TOA-, TDOA-, and SS-based methods, apply to all radio air interface, some positioning techniques are favored by UWB-based systems using ultrawide bandwidths.     

Serially-connected series-stub resonators for narrowband coplanar-stripline bandpass filters

In this letter, a coplanar stripline (CPS) series resonator composed of serially-connected series-stubs is proposed. This kind of resonator provides two transmission zeros close to the resonant frequency. With the proposed structure, the reactance slope parameters of the resonators are significantly increased and adjustable by changing the length ratio of the two series stubs. This is useful for designing narrowband filters which is difficult to realize with conventional series CPS resonators. The structures of the resonators are optimized for a lower radiation loss and used to design a narrowband Chebyshev bandpass filter. The simulation and experimental results show that the proposed filter provides multiple transmission zeros and high selectivity.     

Effect of partitioning on microstructure and properties of a medium carbon Ti Mo bearing high strength Q&P steel

In order to investigate the effect of partitioning procedures on microstructure and properties of a medium carbon Ti Mo bearing steel, the salt bath experiment, field emission SEM, TEM and tensile tests as well as wear tests were utilized to clarify the microstructural evolution and property changes treated by different partitioning parameters. The results show that the microstructures consist of tempered lath martensite, cementite and (Ti, Mo)C particles. With prolonging partitioning time or increasing partitioning temperature, the amount of laths martensite decreases and thicker martensite plates with blunt boundaries appear. In addition, with increasing partitioning temperature from 310℃ to 400℃, the tensile strength, hardness and low temperature toughness are simultaneously decreased, and the reduction reaches up to about 300MPa, 100HV and 20J, respectively. Finally, the wear performance of the samples partitioned below Ms is obviously better than that of samples partitioned above Ms. The morphology of worn surface of samples partitioned below Ms is characterized by plastic fatigue morphology, while the worn surfaces of samples partitioned above Ms are mainly dominated by grooves.     

编队飞行InSAR的平地效应与地形高度效应分析

在编队飞行条件下,推导了InSAR干涉相位特性与平地之间的关系以及相位特性与地形高度之间的关系,定量分析了平地效应对相位的影响以及地形高度对相位的影响.平地与地形高度二者共同影响了InSAR信号的相位,因此相位表达式可以写成二个偏导数的和的形式.以圆锥体为例仿真了地面场景,在不同视角,不同雷达波长,不同基线长度的条件下做了仿真,仿真实验的结果与理论分析的结果一致.     

一种新的PCC-OFDM定时时偏盲估计

多项式相消编码PCC是一种编码技术，在PCC—OFDM调制中，它把将发送的信息调制到一组加权的子载波而不是单个子载波中去。PCC能够显著地降低OFDM对载波频偏的敏感性。本文对PCC—OFDM系统提出了一种新的定时盲估计，估计器是在接收机中的FFT之前进行的。基于PCC—OFDM的符号波形特征，构建定时时偏估计度量函数。最大化度量来估计定时时偏。本估计器不需要训练序列、导频信号或周期前缀。仿真表明，估计器在一个OFDM符号内收敛，且误差较小。     

自由锻锤上冷冲厚板新工艺

介绍了自由锻锤上冷冲厚板工艺的特点和模具主要结构。以及如何解决凸凹模间隙、选用小间隙冲孔时刃口磨损加剧的问题。研制出了降低磨损。提高模具寿命的润滑剂配方。设计了适合自由锻锤上厚板冲孔的模具，对在自由锻锤上厚板冲孔进行了有益的尝试。扩大了自由锻设备的加工范围。解决了不具备大型压力机情形下的生产难题。     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

离心式冷水机组在线监控系统研究

阐述了离心式冷水机且在线监控系统的工作特点以及对监控的要求，说明了在线监控系统的基本配置，关键技术点和功能模块化的软硬件设计。