基于模糊聚类算法的气溶胶单粒子飞行时间质谱在线数据分析系统

介绍了一个在气溶胶分析中大量单粒子质谱数据的处理方案.实现了对气溶胶飞行时间质谱仪采集的单极性激光解吸附电离质谱的在线实时评估.在自动完成最近一次单粒子质谱采集和质谱峰分析之后,质谱信息的统计和评估通过一个模糊聚类法则(Fuzzy C-means,FCM)结合事先的手工分类或是粒子分类数据库实现了对单粒子的分类的立即归属,同时就粒子种类、粒径分布和时间进程的化学成分的变化进行更深入的研究.运用该系统成功地对邻苯二甲酸二正辛酯(Dioctylphthalate,DOP),氯化钙(CaCl2)产生的气溶胶单粒子进行了在线分析,得到了大量单粒子质谱和粒径的信息数据.     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

Analyses of flavor qualities of vegetable oils by gas chromatography

Soybean oil, hydrogenated soybean oil, and corn oil were exposed to fluorescent light for different periods of time to obtain a wide range of flavor qualities. The flavor qualities of these oils were evaluated by sensory and gas Chromatographic methods. Sensory evaluation was conducted using a 10-point hedonic scale to rate overall flavor quality. The sensory panel was made up of 94 members from 8 different laboratories. The correlation coefficients (r) of the flavor scores between sensory evaluation and instrumental analysis for soybean oil, hydrogenated soybean oil, and corn oil were 0.95, 0.97 and 0.97, respectively. These results were very close to the correlation coefficients (r) 0.99, 0.98 and 0.95 obtained from 10 sensory panel members from one specific laboratory.     

Morphology,thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy‐modified organoclay

A new kind of organophilic clay, cotreated by methyl tallow bis‐2‐hydroxyethyl quaternary ammonium and epoxy resin into sodium montmorillonite (to form a strong interaction with polyamide 66 matrix), was prepared and used in preparing PA66/clay nanocomposites (PA66CN) via melt‐compounding method. Three different types of organic clays, CL30B–E00, CL30B–E12, and CL30B–E23, were used to study the effect of epoxy resin in PA66CN. The morphological, mechanical, and thermal properties have been studied using X‐ray diffraction, transmission electron microscopy (TEM), mechanical, and thermal analysis, respectively. TEM analysis of the nanocomposites shows that most of the silicate layers were exfoliated to individual layers and to some thin stacks containing a few layers. PA66CX–E00 and PA66CX–E12 had nearly exfoliated structures in agreement with the SAXS results, while PA66CX–E23 shows a coexistence of intercalated and exfoliated structures. The storage modulus of PA66 nanocomposites was higher than that of the neat PA66 in the whole range of tested temperature. On the other hand, the magnitude of the loss tangent peak in α‐ or β‐transition region decreased gradually with the increase in the clay loading. Multiple melting behavior in PA66 was also observed. Thermal stability more or less decreased with an increasing inorganic content. Young's modulus and tensile strength were enhanced by introducing organoclay. Among the three types of nanocomposites prepared, PA66CX–E12 showed the highest improvement in properties, while PA66CX–E23 showed properties inferior to that of PA66CX–E00 without epoxy resin. In conclusion, an optimum amount of epoxy resin is required to form the strong interaction with the amide group of PA66. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1711–1722, 2006     

基于能量优化的LEACH路由协议改进

针对LEACH路由算法中簇头选举随机性和簇头与基站直接通信导致能量消耗过快且不平衡的特点,提出新的改进算法,以达到降低能耗目的。在改进算法中,簇头剩余能量高于网络平均能量。根据簇头节点与基站的相对位置划分不同区域,簇头节点发送数据采用多跳方式,避免簇头节点能量消耗过快,达到平衡网络能量消耗的目的。仿真表明,通过改进簇头选举条件和采用多跳路由的方式,即使在数据通信量增加的情况下,依然能够延长网络通信时间。     

通用循环水冷却器延时关闭控制联动电路设计

目前许多大型仪器的循环冷却水系统，都没有提供相应的自动化延时关闭装置，给工作带来不便。经过分析，将主机供电系统与循环冷却水供电系统进行关联，设计了联动电路，实现了正常关机，循环冷却水系统自动延时20min后关闭。既节约了工作时间，又提高了工作效率。     

A method for transformation of engineering bill of materials to maintenance bill of materials

In order to solve the transformation problem of Bill of Materials (BOM) from engineering BOM to maintenance BOM for Maintenance, Repair and Overhaul (MRO) systems, a formal transformation model of BOM view is proposed. In this model, the intermediate component, inherited component, virtual component are defined in the specific maintenance management domain, and the transformation process from engineering BOM to maintenance BOM is discussed through feature recognition methods and rules. The proposed transformation model has been developed and deployed in an MRO system for a steel manufacturing enterprise.     

3-甲基-4-硝基亚胺基全氢化-1,3,5-(口恶)二嗪的合成

3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪是合成第二代烟碱类杀虫剂噻虫嗪的重要中间体。介绍并评价了文献中所报道的合成3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪的方法。以硝基胍为起始原料成功的合成了3-甲基-4-硝基亚胺基全氢化-1,3,5-二嗪,总收率为68.2%。     

纳米有机蒙脱土改性邻甲酚醛环氧树脂的研究

利用插层复合技术制备了邻甲酚醛环氧树脂／蒙脱土纳米复合材料，对固化产物利用X射线衍射(XRD)分析有机蒙脱土的层间距变化。通过对复合材料的力学性能测试表明，少量有机化蒙脱土的加入可以较大地提高材料的拉伸强度和冲击强度，起到了同时增韧增强的作用。并且环氧树脂／蒙脱土复合材料的热分解温度和热变形温度也有明显提高。     

一种新型的锂离子二次电池的电解质

本文介绍了氟烷基膦酸锂盐的一种Li[PF3(C2F5)3]的制备做了介绍，并将Li[PF3(C2F5)3]的电解液和六氟磷酸锂(LiPF6)的电解液在对水的稳定性，电化学稳定性，离子导电性以及热稳定性方面做了比较。