并行算法在软件无线电多DSP平台的应用

近年来，随着软件无线电的发展，用于软件无线电平台中的多DSP并行结构受到越来越多的关注，因为这种结构能提高数字信号处理的速度。提出了一种适合在该平台上并行运算的算法，以多阶FIR滤波器为例，验证了算法，并探讨算法的性能，给出了该算法在多处理器条件下，与单处理器处理结果的比较。对选取合适的软件无线电中频处理多处理器平台具有一定的参考价值，并对舰载软件无线电的实现提供了科学参考。     

OFDM系统中同步算法的FPGA 实现

给出了一种用于 OFDM 系统中可同时完成帧起始位置估计和载波频偏估计／补偿的同步算法及其 FPGA 实现方法。采用量化的方法对该不需要额外同步序列的估计算法进行了改进,提高了载波频偏的估计精度,并在数字域进行了频偏校正。在硬件实现上,利用 CORDIC 算法能够有效计算三角函数的特点,把频偏估计和频偏校正过程中的反正切运算和角度旋转操作转化成加法和移位操作,实现了计算精度、运算速度和硬件资源利用三方面性能的兼顾。     

Fabrication of Schottky barrier MOSFETs using self-assembly CoSi2 nanopatterning and spacer gate technologies

A self-assembly patterning method for generation of epitaxial CoSi₂ nanostructures was used to fabricate 50 nm channel-length MOSFETs. The transistors have either a symmetric structure with Schottky source and drain or an asymmetric structure with n⁺-source and Schottky drain. The patterning technique is based on anisotropic diffusion of Co/Si atoms in a strain field during rapid thermal oxidation. The strain field is generated along the edges of a mask consisting of 20 nm SiO₂ and 300 nm Si₃N₄. During rapid thermal oxinitridation (RTON) of the masked silicide structure, a well-defined separation of the silicide layer forms along the edge of the mask. These highly uniform gaps define the channel region of the fabricated device. The separated silicide layers act as metal source and drain. A poly-Si spacer was used as the gate contact. The asymmetric transistor was fabricated by ion implantation into the unprotected CoSi₂ layer and a subsequent out-diffusion process to form the n⁺-source. I–V characteristics of both the symmetric and asymmetric transistor structures have been investigated.     

Catalytic aminolysis of epoxide by alumina prepared from amine-protected Al precursor

The catalytic activities of alumina prepared from an Al alkoxide-amine adduct monomer for the reaction of cyclopentene oxide with piperidine was determined after various pretreatments, including calcination and exposure to moisture. They were compared with the activity of alumina prepared by the conventional hydrolysis method. It was found that the as-prepared sample from the alkoxide-amine monomer preparation was five times more active than a conventional preparation, suggesting that it has a higher density of surface Lewis acid sites. However, its activity was much more severely suppressed by exposure to moisture.     

数据库新技术浅析

介绍了数据库技术的发展及现状，数据库技术与多学科技术的有机结合，根据数据库技术的延伸与发展，论述了数据库建设中应注意的几个问题。     

刑事图像技术的应用与研究

刑事图像技术是刑事科学的重要组成部分：是检验、固定痕迹物证的一种方法。刑事图像的重大应用在于扩大人类的视野，显示肉眼看不到或看不清的重要细节，以便揭露和证实犯罪。     

Finding all hops shortest paths

In this letter, we introduce and investigate a new problem referred to as the All Hops Shortest Paths (AHSP) problem. The AHSP problem involves selecting, for all hop counts, the shortest paths from a given source to any other node in a network. We derive a tight lower bound on the worst-case computational complexities of the optimal comparison-based solutions to AHSP.     

吐哈盆地巴喀油田特低渗砂岩油层裂缝分布特征

巴喀油田中侏罗统砂岩属特低渗透裂缝 孔隙型储集层 ,平均渗透率为 0 .3× 10 - 3μm2 ;地下基质岩块孔隙度为7.4%,渗透率为 0 .16× 10 - 3μm2 。砂岩储集层发育的主要裂缝类型有构造层理缝、正向正交缝、斜向正交缝和羽裂等 ,裂缝宽度一般为 0 .3～ 3 .2mm ,纵向切深为 0 .1～ 0 .8m ,水平延伸长度为 0 .2～ 2 .1m。裂缝以半充填为主 ,其分布受岩性、层厚和构造位置的影响 ,纵向、横向均呈带状分布 ,被裂缝切割而成的基质岩块尺寸取决于裂缝频率 ,岩块长轴方向以北西西向为主 ,与构造轴向基本一致。图 3表 4参 8     

层序单元体系域划分及勘探意义

体系域是层序地层学理论体系中的重要概念，在隐蔽油气藏的勘探中，勘探家们极为重视低位体系域。但体系域的成因意义、是否有不同级别层序的体系域以及如何划分，在实际工作中认识不一致。结合勃海湾盆地的勘探实例，分析体系域的成因机制、组合特征和勘探规律，认为：体系域是基准面变化等因素作用的产物，不同级别的层序都发育着与其对应的体系域：一般情况下，三级层序对应的体系域单元与含油气层的规模相匹配，但四级层序对应的体系域才是隐蔽油气藏赋存的有利部位。图5参6。     

介孔材料制备及研究进展

介孔材料是一类孔径分布在1．5～50nm之间的多孔材料，具有比表面积大，孔隙率高，孔径分布窄，孔排布有序的特点，在催化、分离等领域具有广阔的应用前景。综述了介孔材料近些年在制备、应用、机理等方面的最新进展与前景展望。