Influencing factors of the dynamic hysteresis in varying compliance vibrations of a ball bearing

We focus on the hysteretic characteristics of the varying compliance (VC) principal resonance in a ball bearing. The branches of the periodic VC response are traced by the harmonic balance method and the alternating frequency/time domain technique (HB-AFT) embedding Arc-length continuation, and the stability of these solutions is investigated by using Floquet theory. We find that the resonant response displays a swallow-tail structure due to the coupling nonlinearities between the Hertzian contact and the bearing clearance, which differs from the soft hysteresis of the non-loss Hertzian contact resonances. Furthermore, we find that period-1 VC branch cannot completely characterize the response of the system for a large bearing clearance, because multiple instability regions may occur from the cyclic fold, the secondary Hopf bifurcations, supercritical and subcritical period doubling bifurcations, in which case co-existences of period-1, period-2, and even quasi-periodic VC motions emerge in the hysteretic resonant range.     

Development and implementation of a hybrid scale up model for a batch high shear wet granulation operation

The high shear wet granulation (HSWG) operation consists of several rate processes influenced by the raw material properties, process operational parameters, and equipment design. Their combined effect determines the granule attributes. In literature, these rate processes have been modeled using different dimensionless numbers and their correlations. Each of these dimensionless numbers represent only certain rate processes. Since many of these rate processes occur at the same time, it is necessary to simultaneously model them to account for all the important degrees of freedom. Most of the HSWG scale up approaches in literature calculate scale up conditions based on a single rate process or operating parameter of interest that can lead to sub-optimal process design. We present the development of a hybrid HSWG scale up model accounting simultaneously for all the rate processes. The approach was successfully implemented to scale up the HSWG operation across laboratory, pilot, and commercial scales.     

Influence of forming method of blending versus casting layer-by-layer on structural properties and packing performances of casein-gelatin composite edible film under different appending proportion

In order to obtain casein edible films with great packing performance, gelatin as the reinforcing additive with different ratios were loaded via two methods including layer- by- layer and blending. A comparative study on structure properties between double layers and blending films made from casein and gelatin was obtained by scanning electron microscopy and Fourier transform infrared spectroscopy. The difference between the films' packing characters were conducted by water vapor permeability (WVP), optical property, and mechanical properties (including tensile strength (TS) and elongation (EAB)). The results showed that the degree of films roughness increased and the structural stability decreased as the increase of gelatin additive ratio in both double layers and blending films. Thickness and WVP both displayed a trend of increasing first then decreasing at the dividing of gelatin instead of casein in 50%. Importantly, WVP values in double layers film with a largest value of 6.95 gm⁻¹Pa⁻¹s⁻¹ was higher than blending films, observably (P < 0.05). Additionally, TS in blending film was increased by 23.44% than double layers film under the gelatin additive proportion of 70%, and EAB value in double layers film was larger by 207.65% than blending film under the gelatin additive proportion of 10%.     

配电网单相接地故障特征分析软件设计

我国35 kV及以下配电网大多采用小电流接地方式,运行方式下发生的故障中单相接地故障占70％～80％.当前已有的单相接地故障诊断软件大多无法适应多种Windows操作系统,并且在功能方面较为单一,未形成完备的系统,不能满足需求.在提取接地故障的小波能量比、小波重构系数方差和暂态功率方向三种暂态特征的基础上,设计一款功能完备的单相接地故障特征分析软件,并且利用Pyinstaller库将软件封装为.exe格式的可执行文件.设计软件具有丰富的人机交互接口,能够完成小波分解、波形展示、故障诊断模型训练以及故障诊断等功能,实现了在各种Windows系统下运行并进行单相接地故障数据分析的功能.     

Design of Lu2O3-reinforced Cf/SiC-ZrB2-ZrC ultra-high temperature ceramic matrix composites: Wetting and interfacial reactivity by ZrSi2 based alloys

The wettability and infiltration of molten ZrSi₂ and ZrSi₂-Lu₂O₃ alloys into C_f/SiC and B₄C-infiltrated C_f/SiC composites were investigated to understand the interfacial interactions that occur during the development of C_f/SiC-ZrC and C_f/SiC-ZrB₂-ZrC-Lu₂O₃ materials. A significant evaporation of Si from the liquid affected the wetting behaviour of the alloy when tested in a vacuum at 1670 °C. The better wetting and spreading of the alloy over the surface was observed for the composites with lower overall porosity (12 %). On the other hand, the formation of an outer dense layer, followed up by the uniform infiltrated region up to ～ 1 mm was observed for the C_f/SiC with higher porosity (21 %). The infiltrated alloy reacted with SiC matrix to form ZrC or with B₄C-infiltrated SiC matrix to form ZrB₂-ZrC-SiC. The Lu₂O₃ particles were not wetted by the melt, and were pushed away of the reaction zone by the solidification front.     

Self-Diffusion of Iron in Molten Fe-C Alloys

Self-diffusion coefficients of iron in molten Fe-C alloys have been measured by using the capillary method. In addition, the samples have been autoradiographed and sectioned to insure that no significant convection has occurred during the diffusion. The results can be represented by the equation D = 4.3×10^?3 exp (—12.200/RT) for carbon = 4.6 pct and T = 1513° to 1633°K; and D = 1.0×10^?2 exp (—15,700/RT) for carbon = 2.5 pct and T = 1613° to 1673°K. The D values are higher and the heat of activation for diffusion lower in alloys containing more carbon. Calculation based on the Einstein-Stokes equation indicates that the diffusing species is iron ion.     

Effect of ZrO<Subscript>2</Subscript> coating on<Emphasis Type="Italic">in vitro</Emphasis> formation of calcium phosphate

We prepared zirconia thin films on (100) Si wafer by using a chemical solution deposition with a zirconium naphthenate as a starting material. The films were pyrolyzed at 500°C for 10 min and finally annealed for 30 min in air at 500°C. Amorphous films after annealing had no distinct structure and were uniform along the cross section line.In vitro formation of the calcium phosphate was evaluated by the field emission-scanning electron microscope, energy dispersive X-ray spectrometer and Fourier transform infrared spectroscopy.     

室温低压下脉冲等离子体生长立方氮化硼薄膜

运用脉冲高能量密度等离子体，在室温下制成立方氮化硼薄膜．沉积薄膜的衬底材料分别选用单晶硅、氯化钠和ＧＣｒ１５轴承钢，用扫描电镜、透射电镜、红外吸收谱仪、扫描Ａｕｇｅｒ微探针等对沉积的薄膜进行了分析与测试，结果表明，氮化硼薄膜的结构及性质强烈地依赖于实验条件．分析表明立方氮化硼晶核的形成与衬底材料关系不大，但晶核的生长则部分地依赖于衬底．     

Processing,deformation, and failure in superplastic aluminum alloys: Applications of orientation-imaging microscopy

The importance of grain size refinement in enabling superplasticity is reviewed, and the current understanding of grain boundary characteristics is summarized. The application of orientation-imaging microscopy (OIM) methods to the processing response and the deformation and failure modes in superplastic aluminum alloys are illustrated through microtexture analysis and determination of grain boundary characteristics in selected commercial materials. Continuous and discontinuous recrystallization reactions exhibit distinct microtextures and grain boundary characteristics. The application of OIM and microtexture analysis to the evaluation of both deformation and failure mechanisms during superplastic forming is illustrated. This paper was presented at the International Symposium on Superplasticity and Superplastic Forming, sponsored by the Manufacturing Critical Sector at the ASM International AeroMat 2004 Conference and Exposition, June 8–9, 2004, in Seattle, WA. The symposium was organized by Daniel G. Sanders, The Boeing Company.