Catalytic combustion of natural gas, for applications such as gas turbines, can reduce NOx emissions. Palladium-on-stabilised alumina has been found to be the most efficient catalyst for the complete oxidation of methane to carbon dioxide and water. However, its poor durability is considered to be an obstruction for the development of catalytic combustion. This work was aimed at identifying the origin of this deactivation: metal sintering, support sintering, transformation
or coking.
Catalytic combustion of methane was studied in a 15 mm i.d. and 50 mm length lab reactor and in a 25 mm i.d. pilot test rig on monolithic honeycomb substrates. Experiments were performed at GHSV of 50 000 h−1 in lab test and 500 000 h−1 in pilot test. The catalysts used were palladium on different supports on cordierite substrate. The catalysts were characterised by XRD, STEM, ATG and XPS.
In steady-state conditions, deactivation has been found to be dependent on the air/methane ratio, the palladium content on the washcoat and the amount of washcoat on the substrate. An oscillating behaviour of the methane conversion was even observed under specific conditions, due to the reducibility of palladium oxide PdO to Pd. The influence of the nature of the support on the catalyst deactivation was also investigated. It has been shown that some supports can surprisingly eliminate this oscillating behaviour. However, in pilot test, deactivation was found to be very rapid, even with stabilised alumina supports. Furthermore, successive tests performed on the same catalyst revealed that the activity (light-off temperature, conversion) falls strongly from one test to another.
Then, the stabilised alumina support was calcined at 1230°C for 16 h prior to its impregnation by palladium, in order to rule out its sintering. Experiments carried out on precalcined catalysts point out that deactivation is mostly correlated to the metal transformation under reaction conditions: activity decreases gradually as PdO sinters, but it dropped much more steeply in relation to appearance of metallic palladium. 相似文献
A macroporous monolith used as stationary phase for the separation of biomolecules by immobilized metal ion affinity chromatography (IMAC), based on D5 agarose (D5) chemically modified was proposed. The characterization of physical properties was studied. Pressure drop was <0.4?MPa, being a very low value compared to other similar chromatographic supports. The adsorption/desorption process was carried out using bovine serum albumin (BSA) at pH 7.4 as a target protein. The monolith was re-used for 20 adsorption/desorption cycles and it was possible to verify that the average percentage of adsorption in all cycles was 89.65%. It was also possible to apply a model in order to obtain the kinetic adsorption constant (ka), desorption constant (kd) and equilibrium constant (Ke) by the proposed system. These results indicate that this system is governed by the adsorption process. 相似文献
Myrtaceae honeys produced in Sierra Morena (southern Spain, Andalusia) are obtained from both Eucalyptus camaldulensis and Myrtus communis, and honeys can be easily confused when classified as they come from the same botanical family. The characterisation was intended on the basis of their physicochemical, sensory and palynological properties. Cluster analysis (CA) and principal component analysis (PCA) allowed us to make a distinction between two honey profiles. The first one corresponds to the European sensory profile described for Eucalyptus unifloral honeys. The second profile, which sensory characteristics are absolutely different, has not been previously described. Classification of samples is proposed to be based on their pollen type and content and sensory attributes. Therefore, pollen type and content in E. camaldulensis and M. communis are required to distinguish Eucalyptus honey type from other honeys coming from Myrtaceae family. Sensory analysis identifies honey botanical source as well as palynological analysis: Eucalyptus sensory profile requires over 50% of E. camaldulensis and under 30% of M. communis pollen. Previously undefined sensory profile of myrtle honey is showed under 50% of E. camaldulensis and over 30% of M. communis pollen. 相似文献
Replacement of the damaged scar tissue created by a myocardial infarction is the goal of cardiac tissue engineering. However, once the implanted tissue is in place, monitoring its function is difficult and involves indirect methods, while intervention necessarily requires an invasive procedure and available medical attention. To overcome this, methods of integrating electronic components into engineered tissues have been recently presented. These allow for remote monitoring of tissue function as well as intervention through stimulation and controlled drug release. Here, an improved hybrid microelectronic tissue construct capable of withstanding the dynamic environment of the beating heart without compromising electronic or mechanical functionality is reported. While the reported system is enabled to sense the function of the engineered tissue and provide stimulation for pacing, an electroactive polymer on the electronics enables it to release multiple drugs in parallel. It is envisioned that the integration of microelectronic devices into engineered tissues will provide a better way to monitor patient health from afar, as well as provide facile, more exact methods to control the healing process. 相似文献
In polar oxide interfaces phenomena such as superconductivity, magnetism, 1D conductivity, and quantum Hall states can emerge at the polar discontinuity. Combining controllable ferroelectricity at such interfaces can affect the superconducting properties and sheds light on the mutual effects between the polar oxide and the ferroelectric oxide. Here, the interface between the polar oxide LaAlO3 and the ferroelectric Ca-doped SrTiO3 is studied by means of electrical transport combined with local imaging of the current flow with the use of scanning a superconducting quantum interference device (SQUID). Anomalous behavior of the interface resistivity is observed at low temperatures. The scanning SQUID maps of the current flow suggest that this behavior originates from an intrinsic bias induced by the polar LaAlO3 layer. Such intrinsic bias combined with ferroelectricity can constrain the possible structural domain tiling near the interface. The use of this intrinsic bias is recommended as a method of controlling and tuning the initial state of ferroelectric materials by the design of the polar structure. The hysteretic dependence of the normal and the superconducting state properties on gate voltage can be utilized in multifaceted controllable memory devices. 相似文献
Volatile sulfur compounds (VSCs), particularly low molecular weight sulfhydryls like hydrogen sulfide (H2S) and methanethiol (MeSH), are often observed in wines with sulfurous off-aromas. Recent work has shown both H2S and MeSH can increase up to a few µM (> 40 µg/L) during anoxic storage, but the identity of the latent sources of these sulfhydryls is still disputed. This review critically evaluates the latent precursors and pathways likely to be responsible for the loss and formation of these sulfhydryls during wine storage based on the existing enology literature as well as studies from food chemistry, geochemistry, biochemistry, and synthetic chemistry. We propose that three precursor classes have sufficient concentration and metastability to serve as latent sulfhydryl precursors in wine: 1) transition metal-sulfhydryl complexes, particularly those formed following Cu(II) addition, which are released under anoxic conditions through an unknown mechanism; 2) asymmetric disulfides, polysulfanes, and (di)organopolysulfanes formed through transition-metal mediated oxidation (e.g., Cu(II)) of sulfhydryls or pesticide degradation, and released through sulfitolysis, metal-catalyzed thiol-disulfide exchange or related reactions; 3) S-alkylthioacetates, primarily formed during fermentation, and releasable hydrolytically. Some evidence also exists for S-amino acids serving as precursors. Based on these findings, we propose a “decision tree” approach to choosing appropriate strategies for managing wines with sulfurous off-aromas. 相似文献
The electrical conductivity of poly(2-ethynylthiophene) (P2ET) and poly(2-ethynylfuran) (P2EF) doped with electron acceptors such as iodine, bromine, and ferric chloride was investigated. The maximum electrical conductivities of P2ET and P2EF doped with iodine were 3 × 10?4 Ω?1 cm?1 and 5 × 10?3 Ω?1 cm?1, respectively. The electrical conductivity was nearly independent with increasing molecular weight. The spectral measurements such as UV-visible, infrared, electron paramagnetic resonance, thermogravimetric analysis, and X-ray diffraction were also carried out. 相似文献
The emerging software‐defined networking (SDN) paradigm introduces new opportunities to improve network performance due to the flexibility and programmability provided by a logically centralized element named controller. However, a rapid adoption of the full SDN architecture is difficult in the short term due to economic and technical reasons. This paper faces the SDN nodes replacement problem during the transition from traditional IP networks to fully deployed SDN networks. Six different replacement methods are proposed to select the most appropriate set of traditional IP nodes to be upgraded to SDN‐enabled switches at a particular transition stage. To show the effectiveness of the proposed methods, they have been applied on an optimization problem currently studied by the research community: the power consumption problem. An integer linear programming formulation is presented to solve it and a genetic algorithm is evaluated through simulations on realistic network topologies. Results highlight that energy‐efficiency in hybrid IP/SDN networks can be significantly improved by only replacing a reduced number of IP nodes. 相似文献