STEM-HAADF electron microscopy analysis of the central dark line defect of human tooth enamel crystallites

When human tooth enamel is observed with the Transmission Electron Microscope (TEM), a structural defect is registered in the central region of their nanometric grains or crystallites. This defect has been named as Central Dark Line (CDL) and its structure and function in the enamel structure have been unknown yet. In this work we present the TEM analysis to these crystallites using the High Angle Annular Dark Field (HAADF) technique. Our results suggest that the CDL region is the calcium richest part of the human tooth enamel crystallites.     

Bioleaching of zinc from gold ores using Acidithiobacillus ferrooxidans

The present work investigated microbial leaching of zinc from ore using Acidithiobacillus ferrooxidans (ATCC 14859). The ore samples, consisted of 13wt% zinc, were obtained from a gold mine in north-eastern Thailand. A shake flask study was performed on the ore samples using a rotary shaker under the following fixed conditions (250 r·min-1, 30°C for 16 d). The influence of various conditions, namely medium type (with and without iron), particle ore size (<20, 20-40, 40-60, 60-100, and >100 mesh), ore densit...     

Miniaturisation of planar microwave circuits by using resonant-type left-handed transmission lines

It is demonstrated that planar microwave circuits and components such as impedance inverters or power dividers, among others, can be compacted by using artificial left-handed transmission lines in their designs. Key to this size reduction is the possibility to control the electrical characteristics of these lines (namely electrical length and image impedance) over wide margins by means of a single cell structure. It consists of a microstrip line section with a series capacitive gap etched in the conductor strip and loaded with a complementary split rings resonator etched in the ground plane. A recently reported model of the artificial line is used as a first step in the design of the desired devices. To demonstrate the viability of the approach, several prototype device examples are provided, that is a 90deg impedance inverter and several power dividers with different topologies. A 50% size reduction (as compared to conventional devices) has been achieved by implementing the devices in conventional low loss microwave substrates, but further levels of miniaturisation can be obtained if the devices are fabricated on advanced technologies such as low temperature co-fired ceramic or multi chip module-deposited, among others     

Bioresorbable Drug-Eluting Magnesium-Alloy Scaffold for Treatment of Coronary Artery Disease

The introduction of metallic drug-eluting stents has reduced the risk of restenosis and widened the indications of percutaneous coronary intervention in treatment of coronary artery disease. However, this medical device can induce hypersensitive reaction that interferes with the endothelialization and healing process resulting in late persistent or acquired malapposition of the permanent metallic implant. Delayed endotheliaization and malapposition may lead to late and very late stent thrombosis. Bioresorbable scaffolds (BRS) have been introduced to potentially overcome these limitations, as they provide temporary scaffolding and then disappear, liberating the treated vessel from its cage. Magnesium is an essential mineral needed for a variety of physiological functions in the human body and its bioresorbable alloy has the strength-to-weight ratio comparable with that of strong aluminum alloys and alloy steels. The aim of this review is to present the new developments in Magnesium BRS technology, to describe its clinical application and to discuss the future prospects of this innovative therapy.     

Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy

Excimer laser surface melting (LSM) of the die cast AZ91D alloy has been investigated in terms of microstructure and corrosion behaviour. Excimer LSM of the alloy resulted in a highly homogeneous and refined melted microstructure, which improved the corrosion resistance of the alloy. The latter was associated with the large dissolution of intermetallic phases and the enrichment of aluminium within the melted layer. An increased number of laser pulses resulted in thicker melted layers, but also in enhanced porosity and the formation of micro-cracks at the overlapping area. Both factors diminished the corrosion resistance of the laser-treated alloy.     

Improvement of Poly(lactide) Ductile Properties by Plasticization with Biobased Tartaric Acid Ester

Diethyl l -tartrate (DET) is used as a biobased plasticizer for poly(lactide) (PLA) formulations with improved ductile properties without compromising biodegradation. Different weight percentages (wt.%) of DET in the 0–50 wt.% range are added to PLA by melt compounding and subsequently processed by injection molding. The effect of wt.% DET on mechanical, thermal, thermo-mechanical, morphology, biodegradation, and crystallinity is studied. Addition of 20 wt.% DET leads to a noticeable increase in elongation at break up to values of 567%, which is quite an interesting result considering the extreme brittleness of PLA. These results are verified by field emission scanning electron microscopy (FESEM) images, where filament-like structures are observed, indicative of an effective plasticization. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) show that the glass transition temperature of PLA is drastically decreased down to values of 23 °C for the sample with the highest amount of DET (50 wt.%), thus increasing its ductility and processability. Fourier-transformed infrared spectroscopy (FTIR) spectra show that there exists chemical interactions between PLA and DET. Finally, the biodegradability analysis proves that the developed blends are fully biodegradable, achieving complete disintegration after 49 days. It is observed that DET enhanced the disintegration rate of PLA.