Percutaneous transjejunal biliary intervention: 10-year experience with access via Roux-en-Y loops

Ancylostoma duodenale is still the dominant hookworm species in the Mediterranean area, India, China and Japan. In the present study, biopsied materials were taken from the small intestine of 30 patients infected only with A. duodenale and 12 cross matched controls. The results showed some pathological changes in severely infected cases. However, normal or insignificant changes were seen in the enzymatic activity of the intestinal mucosa.     

Red nucleus stimulation inhibits within the inferior olive

Red nucleus stimulation inhibits within the inferior olive. J. Neurophysiol. 80: 3127-3136, 1998. In the anesthetized cat, electrical stimulation of the magnocellular red nucleus (RNm) inhibits responses of rostral dorsal accessory olive (rDAO) neurons to cutaneous stimulation. We tested the hypothesis that RNm-mediated inhibition occurs within the inferior olive by using stimulation of the ventral funiculus (VF) of the spinal cord in place of cutaneous stimulation of the hindlimb. Fibers in the VF terminate on hindlimb rDAO neurons, so inhibition of this input would have to occur within the olive. rDAO responses elicited by VF stimulation were inhibited by prior stimulation of the RNm, indicating that inhibition occurs within the olive. In contrast, evoked potentials recorded from the VF or dorsal columns following hindlimb stimulation were not affected by prior stimulation of RNm, indicating that stimulation of the RNm does not inhibit olivary afferents at spinal levels. RNm stimulation that inhibited rDAO responses had little effect on evoked somatosensory responses in thalamus, indicating that inhibition generated by activity in RNm may be specific to rDAO. To test limb specificity of RNm-mediated inhibition, conditioning stimulation was applied to the dorsolateral funiculus at thoracic levels, which selectively activates RNm neurons projecting to the lumbar cord. Stimulation at thoracic levels inhibited evoked responses from hindlimb but not forelimb regions of rDAO, suggesting that inhibitory effects of RNm activity are limb specific. Several studies have reported that olivary neurons have reduced sensitivity to peripheral stimulation during movement; it is likely that RNm-mediated inhibition occurring within the olive contributes to this reduction of sensitivity. Inhibition of rDAO responses by descending motor pathways appears to be a salient feature of olivary function.     

The nitric oxide-cGMP pathway may mediate communication between sensory afferents and projection neurons in the antennal lobe of Manduca sexta

The nitric oxide (NO)-cGMP signaling system is thought to play important roles in the function of the olfactory system in both vertebrates and invertebrates. One way of studying the role of NO in the nervous system is to study the distribution and properties of NO synthase (NOS), as well as the soluble guanylyl cyclases (sGCs), which are the best characterized targets of NO. We study NOS and sGC in the relatively simple and well characterized insect olfactory system of the hawkmoth, Manduca sexta. We have cloned Manduca sexta nitric oxide synthase (MsNOS) and two sGCs (MsGCalpha1 and MsGCbeta1), characterized their basic biochemical properties, and studied their expression in the olfactory system. The sequences of the Manduca genes are highly similar to their mammalian homologs and show similar biochemical properties when expressed in COS-7 cells. In particular, we find that MsGC functions as an obligate heterodimer that is stimulated significantly by NO. We also find that MsNOS has a Ca2+-sensitive NO-producing activity similar to that of mammalian neuronal NOS. Northern and in situ hybridization analyses show that MsNOS and the MsGCs are expressed in a complementary pattern, with MsNOS expressed at high levels in the antennae and the MsGCs expressed at high levels in a subset of antennal lobe neurons. The expression patterns of these genes suggest that the NO-sGC signaling system may play a role in mediating communication between olfactory receptor neurons and projection neurons in the glomeruli of the antennal lobe.     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

Analysis of time-dependent flow-sensitive PC-MRI data

Many flow visualization techniques, especially integration-based methods, are problematic when the measured data exhibit noise and discretization issues. Particularly, this is the case for flow-sensitive phase-contrast magnetic resonance imaging (PC-MRI) data sets which not only record anatomic information, but also time-varying flow information. We propose a novel approach for the visualization of such data sets using integration-based methods. Our ideas are based upon finite-time Lyapunov exponents (FTLE) and enable identification of vessel boundaries in the data as high regions of separation. This allows us to correctly restrict integration-based visualization to blood vessels. We validate our technique by comparing our approach to existing anatomy-based methods as well as addressing the benefits and limitations of using FTLE to restrict flow. We also discuss the importance of parameters, i.e., advection length and data resolution, in establishing a well-defined vessel boundary. We extract appropriate flow lines and surfaces that enable the visualization of blood flow within the vessels. We further enhance the visualization by analyzing flow behavior in the seeded region and generating simplified depictions.     

Processing to optimize the strength of heavily drawn Cu-Nb alloys

Heavily drawn Cu-Nb alloys display quite high ultimate tensile strengths. A modification to the consumable arc-casting technique used to prepare these alloys is shown to decrease the as-cast niobium dendrite diameter,t ₀, and also increase strength. Evaluation of strength, niobium filament spacing and thickness data show that strength varies with as-cast niobium dendrite size as somewhere betweent _o ^–0.36 tot _o ^–0.50 . Splat-cooling techniques demonstrate that minimum niobium dendrite sizes as small as 0.22m are possible. These sizes are over a factor of 10 smaller than has been achieved by consumable arc casting, and it is therefore suggested that processing rapidly solidified powders of Cu-Nb alloys should have significant advantages for preparing high-strength heavily drawn Cu-Nb alloys.     

Extraction technique for the determination of oxygen-18 in water using preevacuated glass vials

The need for a rapid, inexpensive technique for routine 18O/16O extraction from water has arisen recently through applications in the medical sciences and in hydrology. The traditional experimental technique for determining the oxygen isotope composition of water, the CO2-H2O equilibration method, is tedious, time consuming, and involves the use of custom-made glass apparatus. Furthermore, because of potential memory effects from one sample to the next, the glassware needs to be thoroughly cleaned between runs. A few attempts have been made to improve upon the method. Attempts to analyze water directly in the source of the mass spectrometer produced large memory effects and questionable results. Commercially available apparatus for automated extraction of 18O/16O from water is generally prohibitively expensive and often is designed to interface only with the manufacturer's own mass spectrometer. The method described in this paper utilizes inexpensive, off-the-shelf, preevacuated, glass vials. Preevacuated vials have been used by others for the isotopic analysis of breath CO2 and are well tested. The vials can be purchased in bulk from scientific apparatus suppliers at a relatively low cost. These are coupled with a simplified extraction line consisting of a stainless steel syringe needle and a glass cold trap. Vials are filled with CO2 and H2O and shaken in a constant-temperature water bath for at least 90 min. Since the vials are discarded after use, no cleaning is necessary, essentially eliminating any memory effect. Reproducibility is generally better than +/- 0.05%. The only reagents required are gaseous CO2 for equilibration, a dry ice/alcohol mixture for trapping water, and liquid nitrogen for transferring the CO2.     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002     

The mechano-sorptive behavior of flexible water-blown polyurethane foams

Samples of flexible water-blown slabstock polyurethane foams were compressed under constant load to study the effects of cycling moisture content on creep behavior and compare this behavior with the creep response where either a constant high or low moisture environment existed at the same temperature. Three sets of foams were tested: (1) 4 pph water content slabstock foam; (2) 5 pph water content slabstock foam; and (3) 2 pph water content molded foam. As the moisture conditions were cycled from low to high humidity while maintaining constant temperature in an environmental chamber, the compressive strain increased in subsequent steps with larger increases observed during the desorption portion of the humidity cycling. All three sets of foams showed similar behavior at a given temperature. At a temperature of 40°C, the strain levels under cyclic moisture conditions surpassed those levels observed at the highest constant relative humidity. During the first absorption step, the creep level increased. During any subsequent absorption step, the creep level either increased very little or none at all. Finally, during any desorption step, the creep level increased. This overall phenomenon of enhanced creep under cyclic moisture levels is attributed to water interacting with the hydrogen bonded structure within the foam. These hydrophillic interactions, principally promoted within the hard segment regions due to high hydrogen bonding, are disrupted causing slippage and increased in strain. As the foam is rapidly dired, regions of free volume are induced by the loss of water thus causing further increases in strain Prior to the reestablishment of well ordered hydrogen bonding. Further support to this proposition was given by the results obtained at a temperature of 90° C where it is well known that hydrogen bonds are much more mobile. Here, the strain levels under cyclic moisture conditions were nearly the same as those under constant high relative humidity. Weakening of the hydrogen bonds by means such as increased temperature resulted in similar strain levels to those under cyclic moisture levels. © 1993 John Wiley & Sons, Inc.     

Processing and morphology of molecularly imprinted nylon thin films

The characterization of thin, selectively imprinted films of nylon‐6 was performed. Amino acids were used as template molecules. Spin‐cast films were prepared with sizes ranging from 2 μm to 300 nm, depending on the nylon and template concentration in the casting solution. The morphological characteristics of the film surface were examined by atomic force microscopy, and the structure within the films was observed by freeze‐fracture scanning electron microscopy. The film activity was clearly coordinated with the appearance of nanometer‐sized pores both on the surface and within the film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2919–2926, 2006