Plasma characterization of dry ��-EDM

An attempt was made to characterize the dry microelectric discharge machining (??-EDM) plasma systematically by using optical emission spectroscopy. In order to characterize the plasma and its parameters such as plasma temperature, electron density, Debye length, and gamma parameter, the optical spectra were recorded for different energies and with different diameters of tool electrode. From the recorded spectra, using line pair method and modified Saha equation, plasma temperature and electron density, respectively were calculated. From these two, Debye length and plasma parameter were also calculated. These studies indicate that the plasma produced in dry ??-EDM is ideal. In addition to this, we found that the dry ??-EDM region is below the conventional EDM region in log electron density and log temperature plot. Morphological analysis was carried out on crater produced by different energies on the workpiece using a scanning electron microscope. The crater shape may dependent on the geometry of the tool tip, number of discharges, and energy of discharge.     

Structural and morphological investigations on DC-magnetron-sputtered nickel films deposited on Si (100)

Pure nickel thin films were deposited on Si (100) substrates under different conditions of sputtering using direct current magnetron sputtering from a nickel metal target. The different deposition parameters employed for this study are target power, argon gas pressure, substrate temperature and substrate-bias voltage. The films exhibited high density of void boundaries with reduction in <111> texture deposited under high argon gas pressures. At argon gas pressure of 5 mTorr and target power of 300 W, Ni deposition rate was ~40 nm/min. In addition, coalescence of grains accompanied with increase in the film texture was observed at high DC power. Ni films undergo morphological transition from continuous, dense void boundaries to microstructure free from voids as the substrate-bias voltage was increased from −10 to −90 V. Furthermore, as the substrate temperature was increased, the films revealed strong <111> fiber texture accompanied with near-equiaxed grain structure. Ni films deposited at 770 K showed the layer-by-layer film formation which lead to dense, continuous microstructure with increase in the grain size.     

Self‐assembled honeycomb polyurethane nanofibers

Electrospinning uses a high voltage electric field to produce fine fibers. A new phenomenon of self‐assembly in the electrospinning of polyurethane nanofibers is observed. This report is the first known self‐assembling phenomenon in polyurethane electrospun nanofibers. Electrospun polyurethane nanofibers self‐assemble into unique honeycomb patterns on the collector surface. This novel observation opens up new and interesting opportunities for electrospun fibers in the areas of drug delivery devices, protective clothing, filters, and tissue scaffolds. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3121–3124, 2006     

Polypyromellitimides. Thermally stable materials

The effect of backbone flexibility on the thermal behaviour of the polyimides was investigated by synthesizing copolyimides based on pyromellitic dianhydride (PMDA) and benzidine (B), p-phenylene diamine (P), and p,p′-diamino diphenyl methane (D). Soluble polyamic acids were obtained by carrying the reaction in dimethyl formamide (DMF) at 0°C. The cyclodehydration of amic acid to polyimides was carried out by chemical means (acetic anhydride : pyridine). Several copolyimides were prepared by changing the molar ratios of diamines in initial monomer feed. These were characterized by evaluation of intrinsic viscosity of polyamic acid in DMF at 30°C. The presence of amic acid and imide structures in the backbone was confirmed by IR spectra. Thermal behaviour of the polymers in air and nitrogen atmosphere was evaluated by dynamic thermogravimetry. The integral procedural decomposition temperature and activation energy of thermal degradation has been evaluated.     

Preparation of Nanohydroxyapatite by a Sol–Gel Method Using Alginic Acid as a Complexing Agent

Single-phase calcium hydroxyapatite (HAP) was synthesized by a sol–gel route using calcium nitrate solution and ammonium dihydrogen phosphate solution as Ca and P sources and alginic acid as a chelating agent. The dried gel was heat-treated at different temperatures in the range of 110°–900°C. Structural evolution from sol to gel and from the gel to HAP was studied by the powder X-ray diffraction method, Infrared spectroscopy, and thermal analyses. The formation temperature of HAP was confirmed to be ∼300°C. Examination of the product obtained at 300°C under TEM suggested the development of hexagonal-shaped nanoparticles, with the average particle size in the range of 50–100 nm.     

Starved air combustion-solidification/stabilization of primary chemical sludge from a tannery

The high concentration of trivalent chromium along with organic/inorganic compounds in tannery sludge causes severe ground water contamination in the case of land disposal and chronic air pollution during incineration. In the present investigation, the sludge was subjected to flow-through column test to evaluate the concentration of leachable organics (tannin, COD and TOC) and heavy metal ions (Cr(3+), Fe(2+)) present in it. The dried sludge was incinerated at 800 degrees C in an incinerator under starved oxygen supply (starved-air combustion) to prevent the conversion of Cr(3+) to Cr(6+). The efficiency of starved air combustion was studied under different loading rates of sludge. The calcined sludge was solidified/stabilized using fly ash and Portland cement/gypsum. The solidified bricks were tested for unconfined compressive strength and heavy metal leaching. Unconfined compressive strength of the blocks was in the range of 83-156 kg/cm(2). The stabilization of chromium (III) in the cement gel matrix was confirmed with scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDX). Leachability studies on solidified bricks were carried out to determine the metal fixation and dissolved organic (as COD) concentration in the leachate.     

Food bioactives, apoptosis, and cancer

Apoptosis interchangeably referred to as programmed cell death is a key pathway for regulating homeostasis and morphogenesis of mammalian cells and is connected with several diseases, in particular, cancer. It is widely believed that misregulation of this pathway leads to the development of cancer. Reflecting this knowledge, the mechanism of action for many currently used anticancer agents were specifically targeted to regulate the apoptotic pathway further stressing the role of programmed cell death in maintaining normal homeostasis. Another widely accepted concept is the consumption of a variety of colorful foods with strong antioxidant properties. These dietary components also referred to as bioactives would help maintain a healthy body. Although for many of these bioactives exact nutritional benefits are not yet well defined, there is demonstrated scientific evidence suggesting a role for them in cancer prevention. This review summarizes the current knowledge of food bioactives that act through the signaling pathway inducing programmed cell death, thus providing the evidence for these substances in cancer prevention.     

Electrospinning as a tool in fabricating hydrated porous cobalt phosphate fibrous network as high rate OER electrocatalysts in alkaline and neutral media

Electrospinning (ES) is a most reliable method for synthesizing one dimensional (1D) fibrous material. Fibrous materials are having peculiar interest owing to their fascinating properties. For efficient hydrogen fuel generation, electrocatalytic water splitting is one of the finest way of producing hydrogen in a pure form. But it is encountered by the counter oxygen evolution reaction (OER) in more often. As of now, noble metal based catalysts are utilized in the commercial sector. Some of the disadvantages associated with the noble materials are restrict their usage commercially. To address this issue, herein, we have synthesized One dimensional (1D), hydrated porous cobalt phosphate fibrous network by an ES method and act as an electrocatalyst for OER in both alkaline and neutral media for the first time, which exhibits an overpotential of 245 and 457 mV respectively at a current density of 10 mAcm^?2 with astonishing stability.