Experiments and simulations of short-pulse laser-pumped extreme ultraviolet lasers

Recent experimental work on the development of extreme ultraviolet lasers undertaken using as the pumping source the VULCAN laser at the Rutherford Appleton Laboratory is compared to detailed simulations. It is shown that short duration (/spl sim/picosecond) pumping can produce X-ray laser pulses of a few picosecond duration and that measurement of the emission from the plasma can give an estimate of the duration of the gain coefficient. The Ehybrid fluid and atomic physics code developed at the University of York is used to simulate X-ray laser gain and plasma emission. Two postprocessors to the Ehybrid code are utilized: 1) to raytrace the X-ray laser beam amplification and refraction and 2) to calculate the radiation emission in the kiloelectronvolt photon energy range. The raytracing and spectral simulations are compared, respectively, to measured X-ray laser output and the output of two diagnostics recording transverse X-ray emission. The pumping laser energy absorbed in the plasma is examined by comparing the simulations to experimental results. It is shown that at high pumping irradiance (>10/sup 15/ Wcm/sup -2/), fast electrons are produced by parametric processes in the preformed long scalelength plasmas. These fast electrons do not pump the population inversion and so pumping efficiency is reduced at high irradiance.     

Optical deflection measurement for characterization of microelectromechanical systems (MEMS)

Nonintrusive measurement of small out-of-plane motions of microscale structures is critical to the development of microelectromechanical systems (MEMS). This paper presents a low-cost deflection measurement system for MEMS structures based on a fiber optic displacement sensor. The system is demonstrated in the characterization of a microwave switch. The deflection system had a demonstrated sensitivity of 290/spl plusmn/32 /spl mu/V/nm over a deflection range of 100 /spl mu/m. The calibration and linearity of the system are described, and the static and dynamic performance is compared to more elaborate systems.     

Alzheimer paired helical filaments (PHFs) studied by high-resolution TEM: what can vertical Pt-C replication tell us about the organization of the pronase-digested PHF core?

Untreated paired helical filaments (PHFs) and pronase-digested PHF-core filaments were stereoscopically imaged with a freeze-drying vertical platinum-carbon replication preparation method for TEM. The untreated PHF have an average wide region (W) = 22.8 +/- 2.4 nm, a narrow region (T) = 10.6 +/- 1.7 nm, and a helical turn period (L) = 78.6 +/- 13.4. The surfaces of the untreated PHF's fuzzy coat appears disorganized. The widths of the pronase-treated PHF-core filaments were significantly reduced (W(d) = 14.8 +/- 1.2 nm, T(d) = 5.7 +/- 1.0 nm, and L(d) = 75.4 +/- 17 nm). The surfaces of the untreated PHF contained approximately 1.1 nm strands, the same size as tau monomer ( approximately 1.0 nm). The pronase-digested PHF cores mostly contained approximately 1.6 +/- 0.3 nm strands although strand diameters ranged from 0.6-2.5 nm. The strands sometimes appear to be wrapped around the filament axis; less often, they appear to be roughly parallel to the PHF axis, and otherwise appear to be randomly oriented. Images of pronase-digested PHF core images are discussed in relation to the core's biochemical composition, its proposed beta structure, and structural subunit models. Images of the untreated and the pronase-digested PHF support a helical ribbon morphology.     

Congenital pseudarthrosis of the clavicle

Congenital pseudarthrosis of the clavicle is a rare anomaly in which the clavicle is formed in utero in two separate segments. Clinically, there is a bump and a palpable discontinuity at the middle of the clavicle. There is no swelling or tenderness, nor disability. Radiologically, the medial ends of both clavicular segments are blunt and there is no interruption of cortical bone. The differential diagnosis includes birth fracture of the clavicle and craniocleidal dysostosis. The obstetrician should be aware of this condition as, if it is misdiagnosed, he may be wrongly accused of birth fracture.     

Licorice-induced hypertension and syndromes of apparent mineralocorticoid excess

Excessive ingestion of licorice induces a syndrome of hypokalemia and hypertension that reflects increased activation of renal mineralocorticoid receptors by cortisol. A similar syndrome of cortisol-dependent mineralocorticoid excess occurs in congenital deficiency of the enzyme 11 beta-hydroxysteroid dehydrogenase, which normally inactivates cortisol to cortisone. It has been shown that licorice inhibits 11 beta-dehydrogenase, preventing local inactivation of cortisol and allowing cortisol inappropriate access to intrinsically nonspecific renal mineralocorticoid receptors. Further studies with licorice and its derivatives have revealed a widespread role for 11 beta-dehydrogenase in regulating tissue sensitivity to cortisol. Deficient 11 beta-dehydrogenase activity provides a novel pathogenetic mechanism for hypertension, and current research suggests that several common forms of hypertension can be explained by the mechanisms that operate in licorice-induced hypertension.     

Covalent functionalization of zinc oxide nanowires for high sensitivity p-nitrophenol detection in biological systems

High-quality zinc oxide (ZnO) nanowires were synthesized using the atmospheric chemical vapor deposition technique and were appropriately characterized. Subsequently, the nanowire surface was covalently grafted with 1-pyrenebutyric acid (PBA) fluorophore, and surface-sensitive X-ray photoelectron spectroscopy and Fourier transform infrared-attenuated total reflectance spectroscopy were utilized to confirm the functionalization of 1-pyrenebutyric acid on the nanowire surface. Additionally, photoluminescence (PL) measurements were used to evaluate the optical behavior of pristine nanowires. Through fluorescence quenching of 1-pyrenebutyric acid by p-nitrophenol, a detection limit of 28 ppb was estimated. Based on these findings, ZnO nanowires functionalized with 1-pyrenebutyric acid are envisaged as extremely sensitive platforms for the ultra-trace detection of p-nitrophenol in biological systems.     

High precision in-cylinder gas thermometry using Laser Induced Gratings: Quantitative measurement of evaporative cooling with gasoline/alcohol blends in a GDI optical engine

The first application of Laser Induced Thermal Gratings Spectroscopy (LITGS) for precision thermometry in a firing GDI optical engine is reported. Crank-angle resolved temperature values were derived from LITGS signals generated in fuel vapour with a pressure dependent precision in the range 0.1–1.0% allowing differences in evaporative or charge cooling effects arising from a variety of ethanol and methanol blends with a model gasoline fuel to be quantified. In addition, fluctuations in temperature arising from cyclic variations in compression were directly detected and measured.