Wirtschaftsinformatik und Ethik – Komplementarität oder Konkurrenz?

Zusammenfassung Vorliegender Beitrag diskutiert die Beziehung zwischen Wirtschaftsinformatik und Ethik. Dabei wird probeweise eine konstruktivistische Ausgangsposition bezogen. Nach der Er?rterung der wichtigsten theoretischen Grundlagen erfolgt die Entfaltung des Themas anhand einiger Felder, in welchen Informatik, Wirtschaftsinformatik, Betriebswirtschaftslehre und Ethik in der Handhabung der Probleme eng aufeinander verwiesen sind. Die Ausführungen verstehen sich als Sondierungen auf ungewissem Terrain.      

Porosity–Property Relationships of Plasma‐Sprayed Gd2Zr2O7/YSZ Thermal Barrier Coatings

During the past decade, gadolinium zirconate (Gd₂Zr₂O₇, GZO) has attracted interest as an alternative material to partially yttria‐stabilized zirconia (YSZ) for thermal barrier coatings (TBCs). Despite the well‐known benefits of GZO, such as lower thermal conductivity and superior temperature capability compared to YSZ, processing of GZO via atmospheric plasma spraying (APS) still remains a challenge. Here, we report on APS experiments which were performed to investigate the influence of processing on GZO microstructure and lifetime of GZO/YSZ double‐layer TBCs. Different microstructures of GZO were produced and characterized in terms of porosity, stoichiometry, Young′s modulus, and their effects on the lifetime of YSZ/GZO double‐layer TBCs were discussed. Particle diagnostics were utilized for the optimization of the process parameters with respect to different microstructures of GZO and stoichiometry. It was found that both cumulative porosity of GZO and pore size distribution, which alter the Young′s modulus significantly, govern the lifetime of double layers. In addition, it was shown that the deviation in GZO stoichiometry due to gadolinia evaporation in the investigated range does not display any critical effect on lifetime.     

Spectral Difference Method for Unstructured Grids II: Extension to the Euler Equations

An efficient, high-order, conservative method named the spectral difference method has been developed recently for conservation laws on unstructured grids. It combines the best features of structured and unstructured grid methods to achieve high-computational efficiency and geometric flexibility; it utilizes the concept of discontinuous and high-order local representations to achieve conservation and high accuracy; and it is based on the finite-difference formulation for simplicity. The method is easy to implement since it does not involve surface or volume integrals. Universal reconstructions are obtained by distributing solution and flux points in a geometrically similar manner for simplex cells. In this paper, the method is further extended to nonlinear systems of conservation laws, the Euler equations. Accuracy studies are performed to numerically verify the order of accuracy. In order to capture both smooth feature and discontinuities, monotonicity limiters are implemented, and tested for several problems in one and two dimensions. The method is more efficient than the discontinuous Galerkin and spectral volume methods for unstructured grids.     

Dioxins in primary kaolin and secondary kaolinitic clays

Since 1996 dioxins have been repeatedly detected worldwide in Tertiary ball clays used as anticaking agent in the production of animal feed and a variety of other applications. The dioxins of these natural clays are very unlikely of anthropogenic source, but no model of dioxin enrichment has been established. A hypothetical model is presented which explains the highly variable dioxin loadings of the Tertiary kaolinitic clays by natural addition during clay-sedimentation. To prove this hypothesis, Tertiary primary nonsedimentary kaolin and sedimentary kaolinitic clays were collected at three profiles in Europe and analyzed for mineralogy, chemistry, organic carbon, and polychlorinated dibenzo-p-dioxins/-furans (PCDD/F). Primary kaolin, kaolinitic, and lignitic clays contained almost no PCDFs. PCDD concentration differed markedly between primary kaolin (3-91 pg/g) and secondary kaolinitic clay (711-45935 pg/g), respectively, lignitic clays (13513-1191120 pg/g). The dioxin loading of secondary kaolinitic and lignitic clays is approximately 10 to a few thousand times higher than in the primary kaolin or recent environmental settings. The dioxin concentrations decrease from octachlorodibenzo-p-dioxin to the tetrachlorodibenzo-p-dioxins and exhibit the "natural formation pattern". No correlation between PCDD/F concentration and bulk composition of clays was found. These findings support the hypothesis of the enrichment of dioxin in clays during sedimentation.     

Mechanical properties of new stainless steels based on the system Fe‐30Mn‐5A1‐XCr‐0.5C

New stainless steels based on the system Fe‐30Mn‐5AI‐XCr‐0.5C (Cr mass contents of ≤ 9 %) were developed and evaluated as a replacement of conventional AISI 304 steel. The alloys were produced by induction melting and thermomechanically processed to obtain a fine equiaxed microstructure. A typical thermomechanical processing for AISI 300 austenitic stainless steels was used and included forging at 1200°C, rolling at 850 °C and final recrystallization at 1050 °C. A final fully austenitic microstructure with grains of about 150 μm in size was obtained in all the steels. Tensile tests at temperatures ranging from ‐196 to 400 °C showed similar results for the various alloys tested. In accordance with the values for the elongation to fracture, this temperature range was subdivided into three regions. In the temperature range of ‐196 °C to room temperature, elongation to fracture increases with decreasing temperature. At temperatures ranging from 100 to 300 °C, elongation to fracture increases with testing temperature and serrations on the stress‐strain curve were observed. Finally, higher testing temperatures were accompanied by a decrease in ductility. Examination of the microstructures after deformation led to the conclusion that mechanical twinning was the dominant mechanism of deformation at the tested temperatures.     

Topology optimization of flow domains using the lattice Boltzmann method

We consider the optimal design of two- (2D) and three-dimensional (3D) flow domains using the lattice Boltzmann method (LBM) as an approximation of Navier-Stokes (NS) flows. The problem is solved by a topology optimization approach varying the effective porosity of a fictitious material. The boundaries of the flow domain are represented by potentially discontinuous material distributions. NS flows are traditionally approximated by finite element and finite volume methods. These schemes, while well established as high-fidelity simulation tools using body-fitted meshes, are effected in their accuracy and robustness when regular meshes with zero-velocity constraints along the surface and in the interior of obstacles are used, as is common in topology optimization. Therefore, we study the potential of the LBM for approximating low Mach number incompressible viscous flows for topology optimization. In the LBM the geometry of flow domains is defined in a discontinuous manner, similar to the approach used in material-based topology optimization. In addition, this non-traditional discretization method features parallel scalability and allows for high-resolution, regular fluid meshes. In this paper, we show how the variation of the porosity can be used in conjunction with the LBM for the optimal design of fluid domains, making the LBM an interesting alternative to NS solvers for topology optimization problems. The potential of our topology optimization approach will be illustrated by 2D and 3D numerical examples.