Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Practical Significance,Theory and Determination of Compatibility of Dyes on Synthetic-polymer Fibres

The compatibility of dyes is particularly important in regard to the time, reproducibility and levelness of dyeing. For basic dyes on acrylic fibres and anionic dyes on nylon, a characteristic of the dye—the compatibility value K— is valuable in determining whether it can be used in the same bath as others. Dyes having the same K-value are compatible under most dyeing conditions. For disperse dyes, K-values do not exist. In selecting such dyes for use together, other properties of the dyes and the concentrations to be used in the particular combination must be considered.     

Kinetic investigations in heterogeneous reaction systems by wavefront analysis

In this paper the previously introduced wavefront analysis is extended to heterogeneous reaction systems, which consist of several reaction steps. It is shown how three mainly informations obtained at the wavefront, namely the damping of the wavefront, the time-gradients at the wavefront and the propagation velocity of the wavefront, can be used for kinetic investigations of a reaction step under consideration.     

Chinongruppenhaltige Polymere als Träger zur Immobilisierung von Enzymen

Crosslinked poly(4-styrenesulfonic acid chloride) was reacted with 3-amino-4-hydroxyphenyl benzoate to give a reactive carrier after saponification and oxidation. Its binding ability was tested with α-chymotrypsin. The binding ability as well as the enzyme activity could be increased by introduction of spacers, e.g. ethylenediamine and hexamethylenediamine between the poly(styrene)-matrix and p-benzoquinone. Also crosslinked poly(vinyl alcohol) was reacted with p-benzoquinone to give a reactive carrier, which could also immobilize α-chymotrypsin. Some properties of the immobilized α-chymotrypsin as activity, pH-optimum and storage stability were investigated.     

Hyperfiltration of surfactants containing solutions from the plating industry

The hyperfiltration of chromic plating rinse water, which contains a special type of surfactant, was examined using different annealed CA membranes. At low concentrations the surfactant influences the volume flow more than the rejection. An effect of the electrolytes can be neglected at low concentration. Increasing surfactant concentration as well as rising electrolyte concentration cause a remarkable drop of both volume flow and electrolyte rejection. This was measured with tetraethylammonium perfluoroctanolsulfonate, a commonly used surfactant for chromic plating.     

Dry and clean age hardening of aluminum alloys by high-pressure gas quenching

When precipitation-hardenable aluminum parts are water quenched, distortion occurs due to thermal stresses. Thereby, a costly reworking is necessary, and for this reason polymer quenchants are often used to reduce distortion, with the disadvantage that the quenched parts have to be cleaned after quenching. In opposition to liquid quenchants, gas quenching may decrease distortion due to the better temperature uniformity during quenching. Furthermore, cleaning of the quenched parts can be avoided because it is a dry process. For this purpose, a heat-treating process was evaluated that included a high-pressure gasquenching step. Gas quenching was applied to different aluminum alloys (i.e., 2024, 6013, 7075, and A357.0), and tensile tests have been carried out to determine the mechanical properties after solution annealing, gas quenching, and aging. Besides high-pressure gas quenching, alloy 2024 was quenched at ambient pressure in a gas nozzle field. The high velocity at the gas outlet leads to an accelerated cooling of the aluminum alloy in this case. Aluminum castings and forgings can be classified as an interesting field of application of these quenching methods due to their near-net shape before the heat treatment. Cost savings would be possible due to the reduced distortion, and therefore, less reworking after the precipitation hardening.     

Spin Extrusion - A New Partial Forming Technology based on 7 NC-Axes Machining

Hollow shape component approaches, applied to shafts and similar workpieces, represent a major potential for ground-breaking innovations in lightweight engineering and safety designs. Among suitable forming technologies, spin extrusion is a pioneering and particularly flexible hollow-shaping technique. All outside form elements, straight or stepped cylinders, cones or spherical rotation elements emerge just from the kinematics of tools. The inside hollow shapes, as e.g. circular cross-sections, shaft to collar connections such as spherical triangles, polygons, splines or dovetail forms are manufactured with a shaping mandrel. Spin extrusion can be applied first and foremost at dimensions that are unattainable with other techniques. The application includes hollow shafts, thick-walled cups and semi-finished tubular products that are not to be found in off-the-shelf cross-sections. In these cases the possibility for using of massive bars is connected with very high price advantages. Furthermore material-saving machining is attracting special attention for high-grade materials.The paper characterizes substantial steps of process analysis and the appliance of a new, derived from the bound method, numerical simulation method for spin extrusion process. Holistic process analysis is the prime factor for process capability. The specific application of the developed special methods of simulation, the accumulation of process data and the integrating into the Computer numerical control of spin extrusion machine is a precondition guaranteeing high-quality assurance.