Thermophysical Properties of Binary Mixtures of Methyl Methacrylate+Di-Ethers (Ethyl, Isopropyl, and Butyl) at 298.15 and 308.15 K

Experimental data for the densities, dynamic viscosities, sound speeds, and relative permittivities and for three binary systems of methyl methacrylate (MMA)+di-ethers (ethyl, isopropyl, and butyl) at 298.15 and 308.15 K and at atmospheric pressure are reported. The mixture viscosities are correlated by Grunberg–Nissan, McAllister, and Auslander equations over the complete composition range. The sound speeds for the mixtures are also calculated by using free length and collision factor theories, and Nomoto and Junjie equations. From the measured primary properties, deviation functions such as deviations in viscosities, sound speeds, relative permittivities, molar polarizations, excess isentropic compressibilities, and molar electrical susceptibilities were calculated, and the compositional dependence of each of the functions was expressed with a Redlich–Kister type equation. The variation of the Kirkwood correlation factor was determined over the complete composition range.     

Flame temperature, fuel structure, and fuel concentration effects on soot formation in inverse diffusion flames

Insights into soot formation processes are gained from chemical sampling and thermocouple probing of co-flowing inverse diffusion flames (IDFs), with the oxidizer in the center. The transition from near-to slightly sooting flames and the effects of flame temperature, fuel concentration, and fuel structure (using methane, ethene, propene and 1-butene) are investigated. The aromatic content of IDFS scales with the fuel's sooting tendency, and suggests that the formation of the aromatic ring is a controlling step in soot formation. In addition to the relatively well-established reactions involving C4 and C2 species, benzene may form directly from two C3 species for fuels that readily produce C3 species during pyrolysis and/or oxidative pyrolysis. The total concentration of growth species increases almost linearly with fuel concentration, but depends more weakly on flame temperature than would be expected if pure pyrolysis governed the intermediate hydrocarbon behavior.     

Pressurized fluidized-bed hydro retort ing of raw and beneficiated Eastern oil shales

Bench-scale tests were conducted with raw and beneficiated shales in an advanced multi-purpose research reactor. Raw Alabama shale and raw and beneficiated Indiana shales were retorted at 515 °C using hydrogen pressures of 4 and 7 MPa. Shale feed rates were 15 to 34 kg h⁻¹. High oil yields and carbon conversions were achieved in all tests. Oil yield from Alabama shale hydroretorted at 7 MPa was 200% of Fischer assay. Raw and beneficiated Indiana shales hydroretorted at 7 MPa produced oil yields of 170 and 195% of Fischer assay respectively. Total carbon conversions were >70% for all tests conducted at 7 MPa.     

Controlled Elemental Depth Profile in Sol–Gel-Derived PZT Films

Elemental depth profiles of PZT films prepared by two sol–gel formulations, differing in the zirconium precursor stabilization, were investigated by SIMS analysis. Early decomposition of the zirconium precursor yielded opposing gradients of zirconium and titanium, while simultaneous late decomposition of zirconium and titanium precursors provided profile uniformity. The gradients formed during initial crystallization are irreversible. Both types of films showed excellent hysteresis; however, uniform films exhibited a much higher dielectric constant, indicating superior piezoelectric properties. Non-uniform films displayed a complex CV pattern, consistent with an inhomogeneous structure. Finally, thermal decomposition of the individual metal precursors is crucial for controlling film uniformity.     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

Extended Hyperbolic Model for Sand-to-Concrete Interfaces

A relatively simple, four-parameter extended hyperbolic model for interfaces was developed for use in soil-structure interaction analyses. The model accommodates arbitrary stress path directions and includes three important elements: (1) development of a yield surface during interface shear; (2) a formulation for yield-inducing shear stiffness that is applicable to any stress path orientation; and (3) a formulation for unloading-reloading shear stiffness. The model was evaluated against the results of shear tests performed at the interface between three different types of sand and a concrete surface under a variety of stress paths. Comparisons between measured and calculated interface response indicate that the model provides accurate estimates of the response of sand-to-concrete interfaces.