Nonisothermal crystallization kinetics and stability of leucite and kalsilite from K2O-Al2O3-SiO2 glasses

The crystallization mechanisms and elemental stability of leucite and kalsilite formed from K₂O-Al₂O₃-SiO₂ glasses were investigated by X-ray powder diffraction (XRD), X-ray fluorescence (XRF), Raman spectroscopy and differential scanning calorimetry (DSC). Glass samples with compositions along the leucite-kalsilite tie-line were produced by melt processing and were then heat-treated at 850, 950, and 1250°C for times ranging from 5 minutes to 1000 hours. Kalsilite is an unstable phase that behaves as an intermediate precursor to leucite. Crystalline materials in which kalsilite is the major phase lose potassium upon prolonged heat treatment (1000 hours at 1250°C), in contrast to those with leucite, in which little or no compositional alteration is detected. The formation of leucite from stoichiometric kalsilite is accompanied by the formation of potassium-doped alumina. The activation energies for leucite and kalsilite crystallization, determined via application of the Kissinger equation to thermal analysis data, were 579 and 548 kJ/mol, respectively. Finally, production of pure leucite can be achieved with more favorable crystallization kinetics when starting with off-stoichiometric compositions.     

Leaf Age-Dependent Photoprotective and Antioxidative Response Mechanisms to Paraquat-Induced Oxidative Stress in Arabidopsis thaliana

Exposure of Arabidopsis thaliana young and mature leaves to the herbicide paraquat (Pq) resulted in a localized increase of hydrogen peroxide (H₂O₂) in the leaf veins and the neighboring mesophyll cells, but this increase was not similar in the two leaf types. Increased H₂O₂ production was concomitant with closed reaction centers (q_P). Thirty min after Pq exposure despite the induction of the photoprotective mechanism of non-photochemical quenching (NPQ) in mature leaves, H₂O₂ production was lower in young leaves mainly due to the higher increase activity of ascorbate peroxidase (APX). Later, 60 min after Pq exposure, the total antioxidant capacity of young leaves was not sufficient to scavenge the excess reactive oxygen species (ROS) that were formed, and thus, a higher H₂O₂ accumulation in young leaves occurred. The energy allocation of absorbed light in photosystem II (PSII) suggests the existence of a differential photoprotective regulatory mechanism in the two leaf types to the time-course Pq exposure accompanied by differential antioxidant protection mechanisms. It is concluded that tolerance to Pq-induced oxidative stress is related to the redox state of quinone A (Q_A).     

Mechanophysical Cues in Extracellular Matrix Regulation of Cell Behavior

The extracellular matrix (ECM) is a macromolecular network that can provide biochemical and structural support for cell adhesion and formation. It regulates cell behavior by influencing biochemical and physical cues. It is a dynamic structure whose components are modified, degraded, or deposited during connective tissue development, giving tissues strength and structural integrity. The physical properties of the natural ECM environment control the design of naturally or synthetically derived biomaterials to guide cell function in tissue engineering. Tissue engineering is an important field that explores physical cues of the ECM to produce new viable tissue for medical applications, such as in organ transplant and organ recovery. Understanding how the ECM exerts physical effects on cell behavior, when cells are seeded in synthetic ECM scaffolds, is of utmost importance. Herein we review recent findings in this area that report on cell behaviors in a variety of ECMs with different physical properties, i.e., topology, geometry, dimensionality, stiffness, and tension.     

Morphological control of porous membranes based on aromatic polyether/water soluble polymers

This work describes the development of porous membranes based on blends of an aromatic polyether bearing main and side chain pyridine units (AP) with hydrophilic ionic polymers, like poly(sodium 4‐styrenesulfonate) (PSSNa) and its acid form (PSSH), or non‐ionic like polyvinylpyrrolidone and polyethylene glycol. Porous membranes were obtained after the removal of the water soluble polymers from the respective blend. The effect of various parameters such as water soluble polymer used (pore former), blend composition, casting solvent, and solvent evaporation level on porous structure formation was studied thoroughly. Specifically, SEM examination for the aforementioned systems indicated various porous morphologies depending on experimental conditions as well as thermodynamic and kinetic parameters occurring during their formation. The thermal properties of the membranes were influenced by the kind of the pore former, as revealed by thermogravimetric analysis. Special attention was paid to the systems AP/PSSNa and AP/PSSH to evaluate their miscibility via dynamic mechanical analysis and ATR‐FTIR spectroscopy. AP/PSSNa membranes have been preliminary used to test the water permeability for water purification. The tests revealed high water flux values at increased PSSNa concentrations. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44539.     

Update on the Diagnostic Pitfalls of Autopsy and Post-Mortem Genetic Testing in Cardiomyopathies

Inherited cardiomyopathies are frequent causes of sudden cardiac death (SCD), especially in young patients. Despite at the autopsy they usually have distinctive microscopic and/or macroscopic diagnostic features, their phenotypes may be mild or ambiguous, possibly leading to misdiagnoses or missed diagnoses. In this review, the main differential diagnoses of hypertrophic cardiomyopathy (e.g., athlete’s heart, idiopathic left ventricular hypertrophy), arrhythmogenic cardiomyopathy (e.g., adipositas cordis, myocarditis) and dilated cardiomyopathy (e.g., acquired forms of dilated cardiomyopathy, left ventricular noncompaction) are discussed. Moreover, the diagnostic issues in SCD victims affected by phenotype-negative hypertrophic cardiomyopathy and the relationship between myocardial bridging and hypertrophic cardiomyopathy are analyzed. Finally, the applications/limits of virtopsy and post-mortem genetic testing in this field are discussed, with particular attention to the issues related to the assessment of the significance of the genetic variants.     

Estimation of generalized entropies with sample spacing

In addition to the well-known Shannon entropy, generalized entropies, such as the Renyi and Tsallis entropies, are increasingly used in many applications. Entropies are computed by means of nonparametric kernel methods that are commonly used to estimate the density function of empirical data. Generalized entropy estimation techniques for one-dimensional data using sample spacings are proposed. By means of computational experiments, it is shown that these techniques are robust and accurate, compare favorably to the popular Parzen window method for estimating entropies, and, in many cases, require fewer computations than Parzen methods.     

Classroom furniture dimensions and anthropometric measures in primary school

The purpose of this study was to compare students' dimensions to the dimension of school furniture, in primary school, and determine whether this type of furniture is well-designed and promotes good sitting posture at school by taking into account the dimensions of the children. A total of 180 (90 male and 90 female) students, from three primary schools in Thessaloniki, Greece, participated in the study. Their ages ranged from 7 to 12 years. The following human body dimensions were measured: stature, elbow height, shoulder height, upper arm length, knee height, popliteal height and buttock-popliteal length. In addition, the dimensions were measured for four different types of chairs and five types of desks prevalent in classrooms. Finally, the anthropometric measures of the students and the furniture dimensions were compared in order to identify any incompatibility between them. The data indicate a mismatch between the students' bodily dimensions and the classroom furniture available to them. The chairs are too high and too deep and desks are also too high for the pupils. This situation has negative effects on the sitting posture of the children especially when reading and writing.