Microstructural,mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating

Brittleness, relative high friction coefficient and wear rate limit the applications of ceramic coatings as wear-resistant layers. However, because embedding additives with ceramic matrix has demonstrated to be an effective way to improve coating performances, different contents and size of h-BN were added into an YSZ suspension. Afterwards, the YSZ/h-BN composite coatings were manufactured by suspension plasma spray and their tribological analysis indicated that: i) the reduction of the friction coefficient and wear rate can be achieved by incorporating h-BN into YSZ coating. ii) finer h-BN particle is more helpful to enhance the tribological properties of the coating. iii) the optimum content is dependent on h-BN particle sizes. iv) when the contents and the size of the h-BN inclusion increase, the probability distribution of the micro-hardness can become bi-modal. Three worn surface conditions were summarized and their wear mechanisms were discussed as well.     

H(div) finite elements based on nonaffine meshes for 3D mixed formulations of flow problems with arbitrary high order accuracy of the divergence of the flux

Effects of nonaffine elements on the accuracy of 3D H(div)-conforming finite elements are studied. Instead of convergence order k+1 for the flux and the divergence of the flux obtained with Raviart-Thomas or Nédélec spaces with normal traces of degree k, based on affine hexahedra or triangular prisms, reduced orders k for the flux and k−1 for the divergence of the flux may occur for distorted elements. To improve this scenario, a hierarchy of enriched flux approximations is considered, by adding internal shape functions up to a higher degree k+n, n>0, while keeping the original normal traces of degree k. The resulting enriched approximations, using multilinear transformations, keep the original flux accuracy (of order k+1 with affine elements or reduced order k otherwise), but enhanced divergence (of order k+n+1, in the affine case, or k+n−1 otherwise) can be reached. The reduced flux accuracy due to quadrilateral face distortions cannot be corrected by including higher order internal functions. The enriched spaces are applied to the mixed finite element formulation of Darcy's model. The computational cost of matrix assembly increases with n, but the condensed system to be solved has the same dimension and structure as the original scheme.     

The Chemical Evolution of the La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3−δ</Subscript> Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

Owing to its extraordinary high activity for catalysing the oxygen exchange reaction, strontium doped LaCoO₃ (LSC) is one of the most promising materials for solid oxide fuel cell (SOFC) cathodes. However, under SOFC operating conditions this material suffers from performance degradation. This loss of electrochemical activity has been extensively studied in the past and an accumulation of strontium at the LSC surface has been shown to be responsible for most of the degradation effects. The present study sheds further light onto LSC surface changes also occurring under SOFC operating conditions. In-situ near ambient pressure X-ray photoelectron spectroscopy measurements were conducted at temperatures between 400 and 790 °C. Simultaneously, electrochemical impedance measurements were performed to characterise the catalytic activity of the LSC electrode surface for O₂ reduction. This combination allowed a correlation of the loss in electro-catalytic activity with the appearance of an additional La-containing Sr-oxide species at the LSC surface. This additional Sr-oxide species preferentially covers electrochemically active Co sites at the surface, and thus very effectively decreases the oxygen exchange performance of LSC. Formation of precipitates, in contrast, was found to play a less important role for the electrochemical degradation of LSC.     

Quantifying Thermal Spray Coating Architecture by Stereological Protocols: Part I. A Historical Perspective

This article presents, from a historical perspective, some stereological protocols of the first order. Such protocols can be implemented to quantify statistically the architecture of thermal spray coatings and their relevant features (pores, lamellas, etc.). A forthcoming Part II of this article will address some key points to implement, from a practical point of view, such protocols.

First confirmation in red wine of products resulting from direct anthocyanin–tannin reactions

Analysis of wine fractions before and after thiolysis confirmed the occurrence in red wine of direct reactions between anthocyanins and tannins established earlier in model solutions. Results showed the presence of two types of structures differing in the linkage position of the anthocyanin moiety. On one hand, detection of malvidin‐3‐glucoside (Mv3g) among thiolysis products revealed the presence of anthocyanin‐derived pigments in which Mv3g is linked by its C‐6 or C‐8 top. On the other hand, LC/MS analysis allowed the detection of two derivatives tentatively identified as flavenes or a bicyclic condensation products yielded by the reaction of a flavanol monomer (C‐6 or C‐8 top) with malvidin‐3‐glucoside (C‐4 position). The presence of the corresponding benzylthioethers after thiolysis of the polymeric fractions confirmed that procyanidins are similarly involved in the latter reaction. Besides, MS also allowed the detection of new benzylthioethers of catechin derivatives released after thiolysis of the wine fractions, indicating that in addition to the postulated processes other types of reactions take place in wines. © 2000 Society of Chemical Industry     

Application of External Axis in Robot-Assisted Thermal Spraying

Currently, industrial robots are widely used in the process of thermal spraying because of their high efficiency, security, and repeatability. Although robots are found suitable for use in industrial productions, they have some natural disadvantages because of their six-axis mechanical linkages. When a robot performs a series of stages of production, it could be hard to move from one to another because a few axes reach their limit value. For this reason, an external axis should be added to the robot system to extend the reachable space of the robots. This article concerns the application of external axis on ABB robots in thermal spraying and the different methods of off-line programming with external axis in the virtual environment. The developed software toolkit was applied to coat real workpiece with a complex geometry in atmospheric plasma spraying).     

Neuronal architectures with axo-dendritic polarity above silicon nanowires

An approach is developped to gain control over the polarity of neuronal networks at the cellular level by physically constraining cell development by the use of micropatterns. It is demonstrated that the position and path of individual axons, the cell extension that propagates the neuron output signal, can be chosen with a success rate higher than 85%. This allows the design of small living computational blocks above silicon nanowires.     

Latest Developments in Suspension and Liquid Precursor Thermal Spraying

The interest to manufacture onto large surfaces thick (i.e., 10-20 μm, average thickness) finely structured or nanostructured layers is increasingly growing since the past 10 years. This explains the interest for suspension thermal spraying (STS) and solution precursor thermal spraying (SPTS), both allowing manufacturing finely structured layers of thicknesses varying between a few micrometers up to a few hundreds of micrometers. STS aims at processing a suspension of sub-micrometer-sized or even nanometer-sized solid particles dispersed in a liquid phase. The liquid phase permits the injection of particles in the thermal flow (i.e., due to their size, a carrier gas cannot play this role). SPTS aims at processing a solution of precursors under the same conditions. Upon evaporation of the liquid phase, the precursor concentration increases until precipitation, pyrolysis, and melting of small droplets occur. Compared to conventional thermal spray routes, STS and SPTS are by far more complex because fragmentation and vaporization of the liquid control the coating build-up mechanisms. Numerous studies are still necessary to reach a better understanding of the involved phenomena and to further develop the technology, among which are injection systems, suspension and solution optimizations, spray kinematics, etc. This review presents some recent developments and our present knowledge in this field together with the available tools implemented to characterize the plasma-liquid interaction and the coating formation.     

Bubble and Froth Stabilizing Agents in Froth Flotation

The mineral processing industry relies heavily on froth flotation to beneficiate complex minerals. The performance of the process depends on a multitude of chemical reagents affecting the solid mineral particles as well as the air bubbles used to collect the valuable mineral particles. In flotation, bubbles and froths are transiently stable by the use of a frothing agent or the presence of inorganic electrolytes in the process water. This review presents the primary stages characterizing bubble coalescence. The effect of flotation reagents and inorganic electrolytes on the stability of bubbles and the mechanisms which delay the coalescence of bubbles are discussed. Recently it had been proposed that solid particles external to the flotation system may be intentionally added to stabilize the froth phase, which has attracted attention from the flotation community. This gave rise to additional studies on the topic. The final section of the paper was therefore designed to capture the progress made on this particular subject. The use of solid flotation aids offers a promising future to increase the recovery of valuable particles as these external particles may be customized. The advantage of solid particles over soluble reagents is that they may be recovered and re-used making them environmentally and economically attractive.     

Polydisperse granular flows in a bladed mixer: Experiments and simulations of cohesionless spheres

The flow and segregation of polydisperse, spherical particle mixtures in a bladed mixer was investigated using experimental and computational techniques. Discrete element simulations were able to reproduce the qualitative segregation profiles and surface velocities observed experimentally. For a binary system with a 2:1 size ratio, segregation by size occurs due to a sieving mechanism. Segregation in the binary system is fast, with a fully segregated system observed after just 5 revolutions. However, the numerical simulations showed that the extent of segregation in the bladed mixer can be reduced by introducing intermediate particle sizes in between the smallest and the largest particles. Addition of intermediate particle sizes increases convective and diffusive particle motion promoting a mixing mechanism that reduces segregation via the sieving mechanism. Void fraction within the bladed mixer increases as the degree of polydispersity is increased allowing the particles to move more freely throughout the particle bed. Higher void fractions also increase the ability of large particles to penetrate deeper into the particle bed. Normal and shear stresses are also affected by particle size distributions, with lower average values obtained for the system with the largest number of particle species. Differences in the amount of stress generated by each particle species were observed. However, the difference in stresses is reduced as the number of particle species in the system is increased.