The assessment of the damage probability of storage tanks in domino events triggered by fire

An approach aimed to the quantitative assessment of the risk caused by escalation scenarios triggered by fire was developed. Simplified models for the estimation of the vessel time to failure (ttf) with respect to the radiation intensity on the vessel shell were obtained using a multi-level approach to the analysis of vessel wall failure under different fire conditions. Each vessel “time to failure” calculated by this approach for the specific fire scenario of concern was compared to a reference time required for effective mitigation actions and related to the escalation probability. The failure probability of each vessel was correlated to the probability of scenarios involving multiple vessel failure as a consequence of the primary fire, thus allowing a comprehensive assessment of domino scenarios triggered by fire. The application of the methodology to the analysis of several case-studies allowed the estimation of the quantitative contribution of escalation events triggered by fire to the overall individual and societal risk indexes.     

Direct determination of phenolic compounds in Sicilian wines by liquid chromatography with PDA and MS detection

Phenolic compounds in Sicilian wines were directly detected using an HPLC with a PDA detector coupled on-line with a MS system equipped with Electrospray Ionisation (ESI) source operated in the negative-ion mode and a quadrupole mass analyzer. In this work, MS spectra were recorded at different voltage, to obtain structural elucidations in addition to molecular mass informations. The different response of the compounds identified has been also evaluated. MS characteristics of cis- and trans-piceid were determined on the basis of the response obtained with the ESI interface.     

Combined effect of lignosulfonate and carbonate on pure portland clinker compounds hydration. III. Hydration of tricalcium silicate alone and in the presence of tricalcium aluminate

The effect of carbonate and/or lignosulfonate on the hydration of C₃S alone and in the presence of C₃A has been examined by DTG and TG curves and by zeta potential measurements. The combined addition of sodium carbonate and lignosulfonate strongly retards C₃A hydration. However by mixing 20 % C₃A with C₃S the retarding effect is significantly lower. On the other hand the early C₃A hydration is completely blocked by sodium carbonate and lignosulfonate simultaneously added. It seems that the fluidifying effect of the combined addition of those admixtures could be ascribed to both the dispersing action and the completely blocking effect on the early C₃A hydration.     

Quantum Erasure of Decoherence

We consider the classical algebra of observables that are diagonal in a given orthonormal basis, and define a complete decoherence process as a completely positive map that asymptotically converts any quantum observable into a diagonal one, while preserving the elements of the classical algebra. For quantum systems in dimension two and three any decoherence process can be undone by collecting classical information from the environment and using such an information to restore the initial system state. As a relevant example, we illustrate the quantum eraser of Scully et al. [Nature 351, 111 (1991)] as an example of environment-assisted correction, and present the generalization of the eraser setup for d-dimensional systems. Presented at the 38th Symposium on Mathematical Physics “Quantum Entanglement & Geometry”, Toruń, June 4–7, 2006.     

A network flow based heuristic approach for optimising AGV movements

Automated Guided Vehicles (AGVs) are driverless carriers that automatically navigate along planned paths by means of several guidance and control methods. This paper proposes an approach for solving the dispatching problem in an AGV system. The problem is modelled through a network by relying on the formulation of a Minimum Cost Flow Problem. In the defined graph, the nodes represent transportation tasks and AGVs while the arcs consider, through the associated weights, several system’s aspects such as pick, drop, and travel times, battery recharging, capacity constraints, congestion and error issues. Two objectives can be achieved: (i) minimisation of the average time for carrying out transportation tasks or (ii) maximisation of the utilisation degree of AGVs. The modelling and solution approach adopted has provided a novel Vehicle–Initiated dispatching rule and parameters settings for the dynamic assignments of transportation missions to AGVs. The decision making process concurrently and dynamically considers several factors. The results show a relevant reduction in the average time for transportation order fulfilment and a decrease in its variability. The proposed approach has been exploited for optimising the AGVs performance in a pharmaceutical production system.     

Observations of wind and ocean wave fields using ERS Synthetic Aperture Radar imagery

The aim of the research reported here is to evaluate Synthetic Aperture Radar (SAR) capability to estimate the wind vector and associated directional wave spectrum. Two ERS–2 SAR images of the Mediterranean Sea, one over the Sicily Channel and one over the Ligurian Sea, were selected as case studies. Wind speed was estimated using SAR calibrated backscatter response, in conjunction with empirically derived ERS scatterometer models such as CMOD4 and CMOD–IFREMER. The predictions of these models were then compared with the actual sea surface wave spectra either provided by in situ measurements or resulting from the inversion of the SAR image spectrum. SAR-detected effects of both wind and wave features, induced either by atmospheric boundary layer instability or by land shadowing, were also used as reliable indicators of wind direction.     

Hyperazeotropic ethanol salted-out by extractive distillation. Theoretical evaluation and experimental check

A distillation process for the production of hyperazeotropic ethanol from a dilute wine obtained from the fermentation of biomass has been studied. This process utilizes the coupling of a soft preconcentration stage and of a dehydration stage based on the salting-out effect produced by calcium chloride on the ethanol in an aqueous solution, with the disappearance of the azeotrope. The salt is employed in a close cycle, due to the presence of a regeneration stage, therefore no consumption of calcium chloride is noticed.

The distillation process utilizes one column consisting of two sections operating at different pressures in order to reach an efficient heat recovery.

In this paper, a simplified flow-sheet of the process and the principal operating conditions of the distillation column are illustrated. When compared with other processes, conventional or under development, this one is characterized by the promising reduction of the specific energy requirement.

The operating conditions chosen for the distillation with salt have been experimentally checked using a laboratory column running continuously with calcium chloride as salting-out agent. Moreover, the experiments confirmed the reliability of the mathematical model of the process. Further experiments are in progress with the aim of utilizing a mixture of salts which can be fed from the bottom of the dehydration section back to the fermentor, so that the salt regeneration stage can be reduced.