Optimisation of a thick-film 10–400 N force sensor

The ring-on-ring bending principle allows the fabrication of simple, low-cost thick-film piezoresistive sensors for compressive forces in the 10–400 N range. However, some imperfections are encountered in its basic embodiment, such as relatively high force-signal hysteresis and nonrepeatability (up to ca. 5%). These shortcomings were studied in this work, and major improvements have been achieved. Hysteresis was found to be mainly due to friction at the outer support ring, and was considerably reduced by inserting a compliant silicone glue ring. The same glue ring was used to permanently bond the sensor to a rigid base, thereby giving well-defined and constant boundary conditions and also considerably improving the repeatability of the sensitivity. Overall, hysteresis and repeatability error were reduced down to a level of ca. 1%.     

Chemical and biological variability of hot pepper fruits (Capsicum annuum var. acuminatum L.) in relation to maturity stage

The aim of the present work was to evaluate the chemical composition and the radical-scavenging and antioxidant activities of hot pepper fruits (Capsicum annuum L. var. acuminatum) at three maturity stages (small green, green and red). GC–MS analysis of n-hexane and chloroform fractions showed a different composition between the three stages of ripening. The first stage of maturation (small green) showed the highest radical-scavenging activity (IC₅₀ of 129 μg/ml). Using the bovine brain peroxidation assay, the methanolic extract of green pepper showed significant antioxidant activity (IC₅₀ of 522 μg/ml). Addition of methanolic extract of red and green pepper inhibited oxidation of linoleic acid. Methanolic extract of red pepper showed greater antioxidative potency than the others (IC₅₀ of 3 μg/ml). The different composition of lipophilic compounds and the various amount of phenolics, showed in the three stage of ripening of C. annuum var. acuminatum fruits, modifies the antioxidant activity.     

Fracture mechanics models applied to delayed failure of LVL beams

Several theories for modelling fracture and slow growth of a crack in wood have been developed. The various models may be differentiated by the specifically regarded stress levels, failure mechanisms and averaging procedures. This paper deals with the application of viscoelastic fracture mechanics models to predict delayed failure of a timber element in bending. Simulations are compared to experimental results of bending tests carried out on LVL (Laminated Veneer Lumber) notched beams. This analysis emphasizes the influence of the geometry and of the size of the beam as well as of the damage area on the delayed failure.     

Isolation of a hydroxytyrosol-rich extract from olive leaves (<Emphasis Type="Italic">Olea Europaea</Emphasis> L.) and evaluation of its antioxidant properties and bioactivity

In this research, a phenol extract of high hydroxytyrosol (OLPE) content was obtained from olive leaves (Olea europaea L.), and subsequently tested under different contexts. The method used to obtain the OLPE basically involved two steps: the use of strongly-acid aqueous steam, generated from 10% HCl (v/v) at 100°C, to directly hydrolyse the native complex phenols from integral olive leaves, and OLPE recovery by liquid–liquid extraction with ethyl acetate. Hydrolysis time was 1 h. Finally, the dried extract was dissolved in distilled water. The OLPE total phenols were determined by Folin–Ciocalteu’s method and by HPLC analysis. Hydroxytyrosol was about 92% of the total phenols present in OLPE, and the yield was about 0.2% on fresh leaves. OLPE showed antioxidant effects on different food lipids and did not inhibit lactic acid bacteria growth; however, it showed cytotoxicity on NIH/3T3 fibroblasts and human umbilical vein endothelial cells at concentrations higher than 0.32 mM (as hydroxytyrosol).     

A new flow reactor for the treatment of polluted water with microwave and ultrasound

Microwave (MW) and high‐intensity ultrasound (US) provide innovative techniques for the degradation of persistent organic pollutants (POPs). When Fenton's reagent is used to treat industrial wastes, organic pollutants are degraded by highly reactive hydroxyl radicals (HO·) that can oxidize almost any organic compound to carbon dioxide and water. These reactions, when carried out under US or MW, are faster and much more efficient. The present work assesses the combined effect of US and MW using a new flow reactor developed in our laboratory. In this 5 L pilot reactor the liquid was pumped in parallel through a modified domestic MW oven and through a cell where it was irradiated with two US generators working at 20 and 300 kHz, while MW irradiation took place in a modified domestic oven. We studied the degradation of 2,4‐dibromophenol (0.1 g L^?1 in water) by Fenton's reagent, assessing the contribution of each energy source to the overall effect, and found that MW and US‐300 kHz played the main role. A modest amount of oxidant (6 mL 30% H₂O₂ per 1 L of polluted water) sufficed to achieve complete degradation within 6 h, at which time organic compounds were no longer detectable. Even if no Fenton's reagent was added, about one half of the pollutant was degraded after 3 h irradiation. Copyright © 2007 Society of Chemical Industry     

Rapid Screening of Lectins for Multivalency Effects with a Glycodendrimer Microarray

Multivalency is an important phenomenon in protein–carbohydrate interactions. In order to evaluate glycodendrimers as multivalent inhibitors of carbohydrate binding proteins, we displayed them on a microarray surface. Valencies were varied from 1 to 8, and corrections were made for the valencies so that all surfaces contained the same amount of the sugar ligand. Five different carbohydrates were attached to the dendrimers. A series of fluorescent lectins was evaluated, and for each of them a binding profile was obtained from a single experiment showing both the specificity of the lectin for a certain sugar and whether it prefers multivalent ligands or not. Very distinct binding patterns were seen for the various lectins. The results were rationalized with respect to the interbinding distances of the lectins.     

Composition and antimalarial activity in vitro of volatile components of Lippia multiflora

The essential oil of Lippia multiflora was prepared by hydrodistillation of leaves and stalks and characterized by GC and mass spectroscopy. The oil was tested for antimalarial activity on in vitro cultures of Plasmodium falciparum (FcB1-Columbia chloroquine-resistant strain and F32-Tanzania chloroquine-sensitive strain). The dilutions inhibiting the in vitro growth of the parasite by 50% 24 and 72 hr after administration of the essential oil to the parasite culture were 1/12,000 and 1/21,000, respectively. When tested on a highly synchronized culture, the essential oil inhibited growth mostly at the trophozoite-schizont step, indicating a potential effect on the first nuclear division of the parasite.     

Experimental study of a mechanically ventilated double-skin façade with venetian sun-shading device: A full-scale investigation in controlled environment

The aim of this article is to present results of an experimental campaign performed on a full-scale facility provided with a double-skin façade. The behaviour of this architectural concept is tested under controlled climatic conditions. A summer case is scrutinised under different configurations: variation of the airflow through the double-skin façade and different angle of the solar shading device. This paper describes the experimental conditions, as well the test facility and the tested façade element. The results show the temperatures of the test cell and the façade and how they depend on the climatic conditions and the sun-shading device blade angles. One objective of this research was to measure and provide extensive data set detailing air and surface temperatures on the double-skin façade, together with airflow rates and air velocities. The experiments are fully described so that the results can be used for the validation of numerical models dealing with ventilated double-skin façades with venetian sun-shading device.