Self-Standing Covalent Organic Framework Membranes for H2/CO2 Separation

Covalent organic frameworks (COFs) are proposed as promising candidates for engineering advanced molecular sieving membranes due to their precise pore sizes, modifiable pore environment, and superior stability. However, COFs are insoluble in common solvents and do not melt at high temperatures, which presents a great challenge for the fabrication of COF-based membranes (COFMs). Herein, for the first time, a new synthetic strategy is reported to prepare continuous and intact self-standing COFMs, including 2D N-COF membrane and 3D COF-300 membrane. Both COFMs show excellent selectivity of H₂/CO₂ mixed gas (13.8 for N-COF membrane and 11 for COF-300 membrane), and especially ultrahigh H₂ permeance (4319 GPU for N-COF membrane and 5160 GPU for COF-300 membrane), which is superior to those of COFMs reported so far. It should be noted that the overall separation performance of self-standing COFMs exceeds the Robeson upper bound. Furthermore, a theoretical study based on Grand Canonical Monte Carlo (GCMC) simulation is performed to explain the excellent separation of H₂/CO₂ through COFMs. Thus, this facile preparation method will provide a broad prospect for the development of self-standing COFMs with highly efficient H₂ purification.     

Expected interference in wireless networks with geometric path loss: a closed-form approximation

In this letter, we derive 2λπP/((α - 2)g^{(α - 2)} as a closed-form approximation of the expected interference around a receiver in wireless networks. We use a geometric path loss model, assume that nodes are randomly distributed, and that only nodes outside a guard zone around the receiver simultaneously transmit. The derived solution depends on the path loss exponent α, node density λ, transmission power per node P, and the radius g of the guard zone. The simplicity of this solution makes it widely applicable in wireless network analysis.     

Cloud-assisted body area networks: state-of-the-art and future challenges

Body area networks (BANs) are emerging as enabling technology for many human-centered application domains such as health-care, sport, fitness, wellness, ergonomics, emergency, safety, security, and sociality. A BAN, which basically consists of wireless wearable sensor nodes usually coordinated by a static or mobile device, is mainly exploited to monitor single assisted livings. Data generated by a BAN can be processed in real-time by the BAN coordinator and/or transmitted to a server-side for online/offline processing and long-term storing. A network of BANs worn by a community of people produces large amount of contextual data that require a scalable and efficient approach for elaboration and storage. Cloud computing can provide a flexible storage and processing infrastructure to perform both online and offline analysis of body sensor data streams. In this paper, we motivate the introduction of Cloud-assisted BANs along with the main challenges that need to be addressed for their development and management. The current state-of-the-art is overviewed and framed according to the main requirements for effective Cloud-assisted BAN architectures. Finally, relevant open research issues in terms of efficiency, scalability, security, interoperability, prototyping, dynamic deployment and management, are discussed.     

Synthesis,Mechanism, and Gas‐Sensing Application of Surfactant Tailored Tungsten Oxide Nanostructures

Widely applicable nonaqueous solution routes have been employed for the syntheses of crystalline nanostructured tungsten oxide particles from a tungsten hexachloride precursor. Here, a systematic study on the crystallization and assembly behavior of tungsten oxide products made by using the bioligand deferoxamine mesylate (DFOM) (product I ), the two chelating ligands hexadecyltrimethylammoniumbromide (CTAB) ( II ) and poly(alkylene oxide) block copolymer (Pluronic P123) ( III ) is presented. The mechanistic pathways for the material synthesis are also discussed in detail. The tungsten oxide nanomaterials and reaction solutions are characterized by Fourier transform IR, ¹H, and ¹³C NMR spectroscopies, powder X‐ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high‐resolution TEM, and selected‐area electron diffraction. The indexing of the line pattern suggests WO₃ is in its monoclinic structure with a = 0.7297 nm, b = 0.7539 nm, c = 0.7688 nm, and β‐i; = 90.91 °. The nanoparticles formed have various architectures, such as chromosomal shapes (product I ) and slates ( II ), which are quite different from the mesoporous one ( III ) that has internal pores or mesopores ranging from 5 to 15 nm. The nanoparticles obtained from all the synthetic procedures are in the range of 40–60 nm. The investigation of the gas‐sensing properties of these materials indicate that all the sensors have good baseline stability and the sensors fabricated from material III present very different response kinetics and different CO detection properties. The possibility of adjusting the morphology and by that tuning the gas‐sensing properties makes the preparation strategies used interesting candidates for fabricating gas‐sensing materials.     

An Analysis of the Sensitivity of Digital Modulation Techniques to Frequency-Selective Fading

This Paper investigates the sensitivity to frequency-selective fading of different modulation techniques commonly used in digital radio systems. The modulation methods considered are phase-shift-keying (Mary PSK), nonoffset and offset quadrature amplitude modulation (M-ary QAM), and quadrature partial response signaling (QPRS). The performances of these methods during multipath fading are compared on the basis of the "signatures" calculated for idealized systems. Results are presented from which the relative outage probability was determined, assuming a propagation channel with frequency-selective Rician fading.     

Persistently exciting model predictive control

Model predictive control (MPC) is a well‐known and widely used advanced control technique, which is model‐based and capable of handling both input and state/output constraints via receding horizon optimization methods. Fundamentally, MPC is a nondynamic or memoryless state feedback control. Because of its use of a model, MPC should be amenable to adaptive implementation and to on‐line tuning of the model. Such an approach requires guaranteeing signal properties, known as ‘persistent excitation’, to ensure uniform identifiability of the model, often expressed in terms of spectral content or ‘sufficient richness’ of a periodic input. We propose an approach to augment the input constraint set of MPC to provide this guarantee. This, in turn, requires equipping the controller with its own state to capture the control signal history. The feasibility of periodic signals for this condition is established. A computational example is presented illustrating the technique and its properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Glass-Ceramic Materials for Guided-Wave Optics

Glass-ceramics (GCs) are multiphase micro- or nano-crystalline materials produced by the controlled nucleation and crystallization of an amorphous glass through a proper heating or chemical process. Most optical applications require transparency, and this usually implies that the crystalline phase be made of nanocrystals. Transparent GCs are able to combine the advantages of all their components, glasses, and crystals. Incorporation of semiconducting, ferroelectrical, and nonlinear optical phases in glass matrices can produce very promising materials for different applications. A very important role is played by nanocrystals which are activated by luminescent species, as rare earth ions. The presence of the crystalline environment around a rare earth ion allows high absorption and emission across sections, and reduction in the nonradiative relaxations thanks to the lower phonon cut-off energy. Such materials may lead to real advances in optical amplifiers, up-conversion fibers, solid-state lasers, medical sensors, and several other devices, especially if combined with a guided-wave configuration, which allows high energy densities and efficient delivery of the transmitted optical beams. The present review article covers the properties and current state of transparent glass-ceramics for guided-wave devices, including the discussion of the preparation methods and of their spectral and luminescent properties.     

Revisitation of Formaldehyde Aniline Condensation. VII. 1,3,5-Triarylhexahydro-sym-triazines and 1,3,5,7-Tetraaryl-1,3,5,7-tetrazocines from Aromatic Amines and Paraformaldehyde

A product study of the reaction between a number of aromatic amines substituted with widely different groups and paraformaldehyde in inert solvents was performed and found to yield 1,3,5-triaryl-1,3,5-hexahydrotriazines, 1,3,5,7-tetraaryl-1,3,5,7-tetrazocines and formaminals. It was not possible to correlate the product outcomes with the actual structure of the amine substrate. The X-ray diffraction structural determination of 1,3,5-tri-(t-butylphenyl)-( 1b ) and 1,3,5-tri-(m-fluorophenyl)-1,3,5-hexahydrotriazine ( 1c ) showed the diaxial arrangement of the N-substituents.     

Revisitation of Formaldehyde Aniline Condensation. I High Yield Synthesis of 1,3,5-Triphenylhexahydro-symtriazine and its X-Ray Crystal Structure Determination

A rapid and efficient preparation of 1,3,5-triphenylhexahydro-sym-triazine ( 10 ) using paraformaldehyde is reported. The trimeric nature of the compound and its structure in solid state, where a biaxial chair conformation is favoured, are conclusively shown by X-ray diffraction analysis. A recent report on a preparation of 1,3-diphenyl-1,3-diazetidine is invalidated.