Iodine Value and Fatty Acids Determination on Pig Fat Samples by FT-NIR Spectroscopy: Benefits of Variable Selection in the Perspective of Industrial Applications

In this work, FT-NIR spectroscopy was employed to determine iodine value (IV) and fatty acids (FA) content of pig fat samples, through the combined use of signal preprocessing, multivariate calibration, and variable selection methods. In particular, the main focus was on the use of variable selection methods, both in order to improve the predictive performance of the calibration models, and to identify relevant wavelengths that could be subsequently used for the development of simple, fast, and cheap hand-held devices, able to measure IV and FA content directly on the fat without the need of any sample pretreatment. Firstly, for each property of interest, partial least squares (PLS) multivariate calibration models were calculated considering the whole spectral range and testing different signal preprocessing methods. Then, once chosen the optimal signal preprocessing method, a two-step variable selection procedure was applied. In the first step, the interval-PLS variable selection algorithm was used to calculate a set of calibration models, whose outcomes were considered altogether in the second step, in order to select the optimal calibration model. The variable selection procedure allowed to lower the number of spectral variables retained by the model, and often led to an increase of the performance in prediction of the external test set samples.     

Effect of electric and flow parameters on PEF treatment efficiency

The effects of both the electric and flow parameters on the lethality and energy efficiency of a pulsed electric fields (PEF) treatment were studied. An experimental plan was designed in order to study the microbial inactivation of Saccharomyces cerevisiae and Escherichia coli cells inoculated in a buffer solution. The following process parameters were taken into consideration: electric field strength (13-30 kV/cm), total specific energy input (20-110 J/mL), flow rate of the processed stream (1-4 L/h) and number of passes through the chamber (up to 5).The results showed that, at a fixed flow rate (2 L/h), microbial inactivation of both microbial strains increased with increasing field strength and applied energy input. The maximum inactivation level (5.9 Log-cycles for S. cerevisiae and 7.0 Log-cycles for E. coli) corresponded to the more intensive PEF treatment (30 kV/cm and 110 J/mL). However, for any given field strength applied, the inactivation rate decreased by increasing the energy input. This behavior was attributed to the presence of heterogeneous treatment conditions due, for example, to a different morphology (size and shape) or cell membrane (composition, structure), a local variation of the electric field strength in the treatment chamber, the tendency of microbial cells to form clusters, or a non-uniform distribution of the residence time of the product in the PEF chamber.A more effective stirring of the microbial suspensions which was achieved, at a fixed field strength (18 kV/cm), either by increasing the flow rate with a single pass operation through the PEF chamber, or by operating in re-circulating mode at a constant flow rate, provided a significant increase in the effectiveness and energy efficiency of the pulse treatment.A mathematical model based on the Weibull distribution adequately described the inactivation kinetics of both microbial strains under different flow dynamic conditions.     

Development of spoilage microbiota in beef stored in nisin activated packaging

The aim of this study was to assess the microbial populations causing the spoilage of chilled beef during storage and to evaluate the effect of the use of an antimicrobial packaging for the meat storage. A nisin activated antimicrobial packaging was developed by using a nisin, HCL and EDTA solution and used for the storage of beef cuts at 1 °C. The common spoilage related microbial groups were monitored during the storage of beef in activated and non activated plastic bags by using selective media. The use of the antimicrobial packaging caused an overall significant reduction of viable counts of Gram positive bacteria such as carnobacteria, lactic acid bacteria and Brochotrix thermosphacta whose development was inhibited for at least 11 days of storage compared to the control. Moreover, a 1–3 log cycles reduction of enterobacteria was also registered between 22 and 32 days of storage. The microbiota was assessed at species level by using Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis of 16S rRNA gene of DNA extracted directly from meat and from bulk cells from selective media plates and showed that the species occurring within the targeted microbial groups did not change according to storage conditions. In conclusion, the use of the nisin activated packaging reduced the number of spoilage populations but did not affect the species diversity. Improved antimicrobial packaging is needed, possibly coupled with vacuum storage, to possibly achieve a simultaneous inhibition of more spoilage microbial groups and to preserve the microbiological quality of beef during chilled storage.     

Modelling of mass transfer and texture evaluation during osmotic dehydration of melon under vacuum

The influence of vacuum time and solution concentration on mass transfer and mechanical properties of osmodehydrated melon cubes has been studied. Pulsed vacuum osmotic dehydration (PVOD) was carried out at 30 °C for 4 h, using sucrose solutions (40, 50 or 60°Brix) and applying a vacuum pulse (100 mbar for 5, 10 or 15 min). Kinetics of water loss, solid gain and stress at rupture were analysed, as well as effective diffusivities using the hydrodynamic model. The increase in solution concentration favoured water removal, but no significant effect of vacuum time was observed. The use of less concentrated solutions coupled to the action of vacuum pulse resulted in greater solid uptake. Samples subjected to PVOD using 60°Brix sucrose solution presented greater water loss, lower sugar uptake and better maintenance of fresh fruit texture throughout the process. Diffusion coefficients estimated by the hydrodynamic model showed a good fit to the experimental data.     

Glass-Ceramic Materials for Guided-Wave Optics

Glass-ceramics (GCs) are multiphase micro- or nano-crystalline materials produced by the controlled nucleation and crystallization of an amorphous glass through a proper heating or chemical process. Most optical applications require transparency, and this usually implies that the crystalline phase be made of nanocrystals. Transparent GCs are able to combine the advantages of all their components, glasses, and crystals. Incorporation of semiconducting, ferroelectrical, and nonlinear optical phases in glass matrices can produce very promising materials for different applications. A very important role is played by nanocrystals which are activated by luminescent species, as rare earth ions. The presence of the crystalline environment around a rare earth ion allows high absorption and emission across sections, and reduction in the nonradiative relaxations thanks to the lower phonon cut-off energy. Such materials may lead to real advances in optical amplifiers, up-conversion fibers, solid-state lasers, medical sensors, and several other devices, especially if combined with a guided-wave configuration, which allows high energy densities and efficient delivery of the transmitted optical beams. The present review article covers the properties and current state of transparent glass-ceramics for guided-wave devices, including the discussion of the preparation methods and of their spectral and luminescent properties.     

Effects of Sedentarism and Treadmill Training in Mechanical Properties of Muscles of Ovariectomized Rats with High-Fat Diet

The aim of this study is to evaluate the ability of physical training in the maintenance of muscle strength in rats with HFD （high-fat diet） after OVX （ovariectomy）. Eighty Wistar rats are at eight weeks of age and weight 200 g which divided into 8 groups （n = 10） and treated for 12 weeks： GA： OVX ＋ ND （normal diet）, GB： OVX ＋ ND ＋ training, GC： sham ＋ ND, GD： sham ＋ ND ＋ training, GE： OVX ＋ HFD, GF： OVX ＋ HFD ＋ training, GG： sham ＋ HFD and GH： sham ＋ HFD ＋ training. HFD consists of standard ration for rats with addition of 30% lipids. In training groups, physical training five training/week was conducted on a treadmill with adaptation period of three weeks up to 18 m/s for one hour, training were performed for 12 weeks. The sedentary animals remained in individual box. To analyze the effects of training and diet, tensile strength tests of the gastrocnemius muscles were conducted： the speed of 0.1 mm/min. Analysis of variance was performed to compare groups. The mean （SD） obtained for the maximum load （N） were： GA 57.77 （6.89）, GB 62.74 （5.07）, GC 49.45 （6.06）, GD 59.42 （5.26） and GE 55.58 （4.72）, GF 62.50 （4.56）, GG 58.35 （4.54） and GH 56.67 （5.87）, respectively. There were no differences for maximum load between surgeries （p = 0.004） and between treatments （p = 0.000）. Differences were found also for the relationship surgery diet treatment （p = 0.007）. For the variable stiffness （N/mm）, there were not statistically significant differences： GA 5.03 （0.72）, GB 5.08 （1.09）, GC 5.17 （0.53）, GD 5.35 （0.80）, GE 5.52 （1.20）, GF 5.36 （1.07）, GG 4.83 （1.03） and GH 5.40 （0.73）. For the toughness （N/mm）, there were differences between treatments （p = 0.010） and the ratio diet treatment （p = 0.024）： GA 455.00 （107.21）, GB 541.96 （126.80）, GC 394.97 （84.67）, GD 566.90 （157.07）; GE 424.63 （113.03）, GF 478.07 （106.03）; GG 517.44 （98.65?     

Effects of Spray-Drying Conditions on the Physicochemical Properties of Blackberry Powder

The purpose of this work was to study the effects of spray-drying conditions on the physicochemical characteristics of blackberry powder using a central composite rotatable design. Inlet air temperature (140–180°C) and maltodextrin concentration (5–25%) were employed as independent variables. Moisture content, hygroscopicity, anthocyanin retention, color, powder morphology, and particle size were analyzed. A higher inlet air temperature significantly increased the hygroscopicity of the powder, decreased its moisture content, and led to the formation of larger particles with smooth surfaces. Powders produced with higher maltodextrin concentrations were less hygroscopic, slightly lighter and less red, and had a lower moisture content. Anthocyanin retention was mainly affected by drying temperature due to the heat sensitivity of the pigment. The optimal processing conditions were an inlet air temperature of 140–150°C and maltodextrin concentration of 5–7%. Overall, these results indicate that good quality powders can be obtained by spray drying, with potential applications for the food industry.     

Effects of Tm3+ Additions on the Crystallization of LaF3 Nanocrystals in Oxyfluoride Glasses: Optical Characterization and Up‐Conversion

The influence of the addition of 1 mol% Tm₂O₃ on the nanocrystallization of LaF₃ in a glass of composition 55SiO₂–20Al₂O₃–15Na₂O–10LaF₃ (mol%) has been studied. Tm₂O₃ affects the phase separation in the glass and delays the onset of crystallization with respect to the undoped glass. Additionally, the maximum LaF₃ crystal size is slightly greater than that in the undoped glass–ceramics. The microstructural and compositional changes in the glass matrix have been studied using several techniques, including viscosity, dilatometry, X‐ray and neutron diffraction (XRD, ND), quantitative Rietveld refinement, transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and Raman spectroscopy. Photoluminescence measurements indicate that the Tm³⁺ ions are distributed between the glassy matrix and LaF₃ crystals. Eu₂O₃ has been used as structure probe and part of the Eu³⁺ ions are reduced to Eu²⁺ when incorporated in the LaF₃ nano‐crystals. Up‐conversion spectra under IR‐excitation show a higher intensity of the blue emission in the Tm‐doped glass–ceramic compared with that in the glass.