Human performance under two different command and control paradigms

The paradoxical behaviour of a new command and control concept called Network Enabled Capability (NEC) provides the motivation for this paper. In it, a traditional hierarchical command and control organisation was pitted against a network centric alternative on a common task, played thirty times, by two teams. Multiple regression was used to undertake a simple form of time series analysis. It revealed that whilst the NEC condition ended up being slightly slower than its hierarchical counterpart, it was able to balance and optimise all three of the performance variables measured (task time, enemies neutralised and attrition). From this it is argued that a useful conceptual response is not to consider NEC as an end product comprised of networked computers and standard operating procedures, nor to regard the human system interaction as inherently stable, but rather to view it as a set of initial conditions from which the most adaptable component of all can be harnessed: the human.     

CdS-sensitized TiO2 in phenazopyridine photo-degradation: Catalyst efficiency,stability and feasibility assessment

Mineralization of phenazopyridine, 1, in water, under solar-simulator radiation was efficiently achieved using nanoparticle CdS-sensitized rutile TiO₂, TiO₂/CdS, 2, as photo-catalysts. Despite that, 2 showed two main drawbacks. Firstly, the system was difficult to recover by simple filtration, and demanded centrifugation. Secondly, the sensitizer CdS showed relatively high tendency to leach out hazardous Cd²⁺ ions under photo-degradation reaction conditions. In an attempt to solve out such difficulties, 2 was supported onto sand surface. The sand/TiO₂/CdS system, 3, was easier to recover but showed slightly lower catalytic activity compared to 2. On the other hand, the support failed to prevent leaching of Cd²⁺. This indicates limited future applicability of CdS-sensitized TiO₂ photo-catalyst systems, in solar-based water purification strategies, unless leaching out tendency is completely prevented.     

A systematic methodology for kinetic modeling of chemical reactions applied to n‐hexane hydroisomerization

Kinetic modeling provides chemical engineers with a unique opportunity to better understand reaction kinetics in general and the underlying chemistry in particular. How to systematically approach a modeling assignment in chemical reaction kinetics is typically less clear, especially for novices in the field. The proposed modeling methodology pursues an adequate compromise between statistical significance and physical meaning of the kinetic model and the corresponding parameters and typically results in models of an appropriate complexity. It comprises the following activities: (1) data analysis, aiming at qualitative information on the reaction mechanism and corresponding rate equations, (2) model regression to quantify this information via optimal parameter values, and (3) validation of the statistical significance and physical meaning of the parameter estimates. This methodology is successfully applied to n‐hexane hydroisomerization on a bifunctional catalyst. © 2014 American Institute of Chemical Engineers AIChE J, 61: 880–892, 2015     

Do ‘green’ buildings have better indoor environments? New evidence

A post-occupancy evaluation (POE) of 12 green and 12 conventional office buildings across Canada and the northern United States was conducted. Occupants (N = 2545) completed an online questionnaire related to environmental satisfaction, job satisfaction and organizational commitment, health and well-being, environmental attitudes, and commuting. In each building on-site physical measurements at a sample of workstations (N= 974) were taken, including: thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Green buildings exhibited superior performance compared with similar conventional buildings. Better outcomes included: environmental satisfaction, satisfaction with thermal conditions, satisfaction with the view to the outside, aesthetic appearance, less disturbance from heating, ventilation and air-conditioning (HVAC) noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. A variety of physical features led to improved occupant outcomes across all buildings, including: conditions associated with speech privacy, lower background noise levels, higher light levels, greater access to windows, conditions associated with thermal comfort, and fewer airborne particulates. Green building rating systems might benefit from further attention in several areas, including: credits related to acoustic performance, a greater focus on reducing airborne particulates, enhanced support for the interdisciplinary design process and development of POE protocols.

Il a été mené une évaluation après occupation (POE) de 12 immeubles de bureaux verts et 12 immeubles de bureaux classiques répartis à travers le Canada et le nord des Etats-Unis. Les occupants (N?=?2545) ont rempli un questionnaire en ligne portant sur la satisfaction environnementale, la satisfaction au travail et l'implication organisationnelle, la santé et le bien-être, les attitudes environnementales, et les trajets réguliers. Dans chaque immeuble, des mesures physiques in situ sur un échantillon de postes de travail (N?=?974) ont été effectuées, comprenant : les conditions thermiques, la qualité de l'air, l'acoustique, l'éclairage, la taille des postes de travail, la hauteur de plafond, l'accès aux fenêtres et leur occultation, et les finitions de surface. Les bâtiments verts ont affiché des performances supérieures par rapport aux bâtiments classiques similaires. De meilleurs résultats ont été obtenus concernant la satisfaction environnementale, la satisfaction à l'égard des conditions thermiques, la satisfaction à l'égard de la vue sur l'extérieur, l'aspect esthétique, la diminution des perturbations liées aux bruits provenant du chauffage, de la ventilation et de la climatisation (CVC), l'image du lieu de travail, la qualité du sommeil nocturne, l'humeur, les symptômes physiques, et la réduction du nombre de particules en suspension dans l'air. Différentes caractéristiques physiques ont conduit à une amélioration des résultats pour les occupants dans tous les immeubles, concernant notamment les conditions liées à la confidentialité des conversations, les niveaux inférieurs de bruit de fond, les niveaux de luminosité plus élevés, l'accès accru aux fenêtres, les conditions associées au confort thermique, et le nombre moindre de particules en suspension dans l'air. Les systèmes de notation des bâtiments verts pourraient bénéficier d'une plus grande attention apportée à plusieurs domaines, s'agissant en particulier des crédits relatifs aux performances acoustiques, d'un accent accru sur la réduction des particules en suspension dans l'air, d'un soutien renforcé en faveur du processus de conception interdisciplinaire et du développement de protocoles POE.

Mots clés: performances des bâtiments, bilan environnemental, bâtiments verts, environnement intérieur, Leadership in Energy and Environmental Design (LEED), satisfaction des occupants, évaluation après occupation     

中小城市——法国国土开发的催化剂

法国有大量的中小城市,这些城市在1945—1973年间经历了急剧的人口和经济增长。从那以后,中小城市的活力与大聚落的活力就不相上下。半个多世纪以来,小城市发展的重要因素是欧洲的农业政策,中型城市则受益于法国的国土规划政策。然而无论中型城市还是小城市又各自有其内生的发展,主要因为它们提供的良好生活环境可以促进住宅经济发展。法国北方分布较多工业,只要它们懂得创新之道就能抵抗风险;南方以旅游业为主,是全球旅游的胜地。总之,中小城市以它们特有的吸引力为国土的发展做出了贡献。     

Planning in the Ethno-culturally Diverse City: A Comment

This article examines how major retailers, in their attempts to secure sites for very large stores (over 7000 m2 sales area), have had to adopt new strategies in order to overcome resistance from local authority and central government retail planning policy. These strategies include recycling of old retail developments with ‘open A1 consent’, participation in urban regeneration projects and development or redevelopment of ‘district shopping centres’ in urban areas. Discussion of these strategies reveals weaknesses and inconsistencies in retail planning policy in the UK.     

Deformation Control During Thermal Treatment of Electrospun PbZr0.52Ti0.48O3 Nanofiber Mats

This paper focuses on the deformation origin of PbZr_0.52Ti_0.48O₃ (PZT) fiber mats obtained by electrospinning. The main cause of deformation of the green mats during heating was found to be a nonuniform relaxation of the stretched PVP polymer, due to nonuniform thermal decomposition of the Pb‐hexanoate in the fibers. This relaxation starts under 100°C, well below the polymer decomposition temperature. The shrinkage was found to accelerate above the polymer glass transition point, giving rise to an overall linear change of almost 50%. The “green” PZT mats were easily separated from the collector by first depositing a pure PVP sublayer on the collector. An optimal fabrication and slow multistep thermal treatment process that provides fiber mats with desired PZT phase and overcomes the nonuniform deformation is described.     

Kinetics of Multi‐Step Redox Processes by Time‐Resolved In Situ X‐ray Diffraction

The kinetics of redox reactions of iron oxide in oxygen carrier 50Fe₂O₃/MgAl₂O₄ are examined using different time‐resolved techniques. Reduction kinetics are studied by H₂ temperature‐programmed reduction (H₂‐TPR) monitored by time‐resolved in situ XRD. In contrast to conventional TPR, in situ XRD distinguishes the three‐stage reduction of Fe₂O₃ → Fe₃O₄ → FeO → Fe. It also shows that the oxidation of Fe → Fe₃O₄ by CO₂ has no intermediate crystalline phases, explaining why its kinetics can easily be investigated by conventional CO₂ temperature‐programmed oxidation (CO₂‐TPO). A shrinking core model which takes into account solid state diffusion allows describing the experimental data.     

A Novel Technology for Natural Gas Conversion by Means of Integrated Oxidative Coupling and Dry Reforming of Methane

A novel process concept for the oxidative coupling of methane followed by the oligomerization to liquids has been developed within the frame of the EU integrated project OCMOL. This technology is based on process intensification principles via cutting‐edge structured microreactor technology. It is also a fully integrated industrial process through the re‐use and the recycling of by‐products, in particular CO₂, at every process stage. The focus of this contribution is on the reaction engineering aspects of the core steps, i.e., catalysts, kinetics and reactor design for the methane coupling and reforming.