Diffuse and point sources of silica in the Seine River watershed

Dissolved silica (DSi) is believed to enter aquatic ecosystems primarily through diffuse sources by weathering. Point sources have generally been considered negligible, although recent reports of DSi inputs from domestic and industrial sources suggest otherwise. In addition, particulate amorphous silica (ASi) inputs from terrestrial ecosystems during soil erosion and in vegetation can dissolve and also be a significant source of DSi. We quantify here both point and diffuse sources of DSi and particulate ASi to the Seine River watershed. The total per capita point source inputs of Si (DSi + ASi) were found to be 1.0 and 0.8 g Si inhabitant(-1) d(-1) in raw and treated waters of the Achères wastewater treatment plant, in agreement with calculations based on average food intake and silica-containing washing products consumption. A mass balance of Si inputs and outputs for the Seine drainage network was established for wet and dry hydrological conditions (2001 and 2003, respectively). Diffuse sources of Si are of 1775 kg Si km(-2) y(-1) in wet conditions and 762 kg Si km(-2) y(-1) in dry conditions, with the proportion of ASi around 6%. Point sources of Si from urban discharge can contribute to more than 8% of the total Si inputs at the basin scale in hydrologically dry years. An in-stream retention of 6% of total inputs in dry conditions and 12% in wet conditions is inferred from the budget.     

Mineralogy of air-pollution-control residues from a secondary lead smelter: environmental implications

The mineralogy and solubility of air-pollution-control (APC) residues from a secondary lead (Pb) smelter have been studied on samples from the Príbram smelter, Czech Republic, recycling car batteries, with the emphasis on their potential environmental effect. The presence of dominant anglesite (PbSO4) and laurionite (Pb(OH)Cl) was observed in a sintered residue from after-burning chambers (800-1000 degrees C). In contrast, low-temperature Pb-bearing phases, such as KCl x 2PbCl2 and caracolite (Na3Pb2(SO4)3Cl), were detected in the major APC residue from bag-type fabric filters. Metallic elements, zinc (Zn), cadmium (Cd), and tin (Sn) were found homogeneously distributed within this residue. The formation of anglesite, cotunnite (PbCl2), (Zn,Cd)2SnO4, and (Sb,As)2O3 was observed during the sintering of this APC residue at 500 degrees C in a rotary furnace. The 168 h leaching test on filter residue, representing the fraction that may escape the flue gas treatment system, indicated rapid release of Pb and other contaminants. Caracolite and KCl x 2PbCl2 are significantly dissolved, and anglesite and cotunnite form the alteration products, as was confirmed by mineralogical analysis and PHREEQC-2 modeling. The observed Pb-bearing chlorides have significantly higher solubility than anglesite and, following emission from the smelter stack, can readily dissolve, transferring Pb into the environmental milieu (soils, water, inhabited areas).     

Phase Diagram for the 0.4Pb(Ni1/3,Nb1/3)O3–0.6Pb(Zr,Ti)O3 Solid Solution in the Vicinity of a Morphotropic Phase Boundary

A phase diagram based on dielectric-permittivity-versus-temperature measurements and high-temperature X-ray diffractometry was proposed for 0.4Pb(Ni_1/3,Nb_1/3)O₃- x PbZrO₃-(0.6- x )PbTiO₃ (0.2 lessthan equal to x lessthan equal to 0.32) relaxor-ferroelectric solid solution, and a morphotropic phase boundary that sharply bends toward zirconium-rich compositions was found. A spontaneous normal-to-relaxor ferroelectric transition was also observed when heating was performed for all the compositions tested near the morphotropic phase boundary. Additional considerations about previously published phase diagrams for Pb(Zn_1/3,Nb_2/3)O₃-PbTiO₃ and Pb(Mg_1/3,Nb_1/3)O₃-PbTiO₃ might lead to an extension of the presented diagram to these compositions.     

Poly(vinyl) chloroformate and derivatives

Poly(vinyl chloroformates) of high molecular weight have been successfully modified by amines and by KCN. Poly (vinyl carbonates) have been prepared by polymerization of phenyl vinyl carbonate.     

Voltage-Current Characteristics of a Simple Zinc Oxide Varistor Containing Magnesia

This paper examines the effect of MgO addition on the structural and electrical characteristics of a ZnO varistor composition with few dopants. MgO acts as a grain-growth inhibitor. The electrical performances of the obtained varistors are improved.     

Sensortechnik in der Chemie – Status und Trend

Sensor technology in the chemical process industries – status and trends . Sensor technology is used in chemical process industries to provide information on product and process properties. The computerized handling of this information has altered the requirements for sensor systems. New production methods and the automation of existing processes lead to new tasks for sensor systems. The advancement of sensor technology is proceeding on a broad front and in small steps, also exploiting the potential of microelectronics. Model-based measuring methods utilizing a priori knowledge about the process may substantially increase the information gain.     

Effects of Temperature and Strain Rate on the Plastic Deformation of Fully Dense Polycrystalline Y1Ba2Cu3O7−x Superconductor

The knowledge of the steady-state stress for plastic deformation as a function of temperature and strain rate is essential for hot-forming superconducting material into commercially useful shapes. In this paper, results are presented on the experimental determination of the rheology of fully dense polycrystalline Y₁Ba₂Cu₃O_7−x superconducting material at temperatures ranging from 750° to 950°C and strain rates of 10⁻⁴, 10⁻⁵, and 10⁻⁶ s⁻¹. The data are best fitted by a power law: ε(s⁻¹)=8.9 × 10⁻¹⁷. (s⁻¹) σ^2.5 (Pa) exp [−2.01 × 10⁵(J·mol⁻¹)|RT]. X-ray analysis shows that the superconducting material retains its phase composition after nearly 70% total strain of the sample. A strong anisotropy in the resistivity of the deformed samples is observed because of the development of a preferred orientation of the a or b axis of Y₁Ba₂Cu₃O_7−x orthorhombic perovskite single crystals perpendicular to the principal maximum compressive stress.     

Design of Phosphonated Imidazolium-Based Ionic Liquids Grafted on γ-Alumina: Potential Model for Hybrid Membranes

Imidazolium bromide-based ionic liquids bearing phosphonyl groups on the cationic part were synthesized and grafted on γ-alumina (γ-Al₂O₃) powders. These powders were prepared as companion samples of conventional mesoporous γ-alumina membranes, in order to favor a possible transfer of the results to supported membrane materials, which could be used for CO₂ separation applications. Effective grafting was demonstrated using energy dispersive X-ray spectrometry (EDX), N₂ adsorption measurements, fourier transform infrared spectroscopy (FTIR), and special attention was paid to ³¹P and ¹³C solid state nuclear magnetic resonance spectroscopy (NMR).     

Influence of Host-Plant Surface Chemicals on the Oviposition of the Cereal Stemborer Busseola Fusca

The chemical composition of plant surfaces plays a role in selection of host plants by herbivorous insects. Once the insect reaches the plant, these cues determine host acceptance. Laboratory studies have shown that the stem borer Busseola fusca (Lepidoptera: Noctuidae), an important pest of sorghum and maize in sub-Saharan Africa, is able to differentiate between host and non-host plant species. However, no information is available on the cues used by this insect to seek and accept the host plant. Thus, the role of surface phytochemical stimuli on host selection and oviposition by B. fusca was studied in the laboratory using two host plants, sorghum, Sorghum bicolor, and maize, Zea mays, and one non-host plant, Napier grass, Pennisetum purpureum. The numbers of eggs and egg masses deposited on the three plant species were compared first under no-choice and choice conditions. In both cases, more eggs and egg masses were laid on maize and sorghum than on the non-host. Artificial surrogate stems treated with a water or chloroform surface extract of each plant were then compared with surrogate stems treated with, respectively, water or chloroform as controls, under similar conditions. Surrogate stems treated with plant water extracts did not show an increase in oviposition when compared to controls, indicating that the major compounds in these extracts, i.e., simple sugars and free amino acids, are not significantly responsible for the oviposition preference. By contrast, a chloroform extract of sorghum enhanced oviposition on the surrogate stems compared to the control, while those of maize and Napier grass showed no significant effects. Analysis of the chloroform extract of sorghum showed higher amounts of α-amyrin, ß-amyrin, and n-nonacosane compared to those of maize and Napier grass. A blend of the three chemicals significantly increased oviposition compared to the chloroform-treated control, indicating that these compounds are part of the surface chemical signature of the plant responsible for host recognition and oviposition by B. fusca.