Adapting an ultrasonic image threshold method to eddy current images and defining a validation domain of the thresholding method

This paper presents a generalization to eddy current images of a thresholding method developed for ultrasonic imaging. It is also shown how to improve the thresholding strength through the definition of a cooperation rule between two threshold assessment measures. This rule is also used to reduce time of calculus. These measures are calculated from the image cooccurrence matrix. The aim is to build a thresholding method that gives a threshold value but also an indicator which allows the operator to know if the methodology applies to the processed image. Examples of results are presented.     

Centrifugal partition chromatography applied to the isolation of oak wood aroma precursors

Flavours extracted from oak wood during barrel ageing contribute to the organoleptic character of wines and spirits. The aim of this work was to identify the glycosidic precursors of the key volatile compounds responsible for oak wood aroma. Oak extract is a very complex matrix and, furthermore, precursors are present in very small quantities. Preparative centrifugal partition chromatography (CPC) is a promising solution for purifying the oak extract. The solvent system was selected on the basis of the partition coefficient of glycosidase enzyme activity (K_ca). Thanks to the efficacy of CPC separation, three glucoside gallates were subsequently isolated by HPLC chromatography. Vanillin-(6′-O-galloyl)-O-β-d-glucopyranoside, 3,4,5-trimethoxyphenyl-(6′-O-galloyl)-O-β-d-glucopyranoside, and (6R,9R)-3-oxo-α-ionol-9-O-(6′-O-galloyl)-β-glucopyranoside (macarangioside E) were isolated and identified. This was the first time that vanillin-(6′-O-galloyl)-O-β-d-glucopyranoside was identified and the first time that macarangioside E was isolated from oak wood. Heating macarangioside E resulted in the formation of megastigmatrienone, which has an aroma reminiscent of tobacco.     

Direction of Arrival Estimation using EM-ESPRIT with Nonuniform Arrays

This paper deals with the problem of the Direction Of Arrival (DOA) estimation with nonuniform linear arrays. The proposed method is based on the Expectation Maximization method where ESPRIT is used in the maximization step. The key idea is to iteratively interpolate the data to a virtual uniform linear array in order to apply ESPRIT to estimate the DOA. The iterative approach allows one to improve the interpolation using the previously estimated DOA. One of this method’s novelties lies in its capacity of dealing with any nonuniform array geometry. This technique manifests significant performance and computational advantages over previous algorithms such as Spectral MUSIC, EM-IQML and the method based on manifold separation technique. EM-ESPRIT is shown to be more robust to additive noise. Furthermore, EM-ESPRIT fully exploits the advantages of using a nonuniform array over a uniform array: simulations show that for the same aperture and with a smaller number of sensors, the nonuniform array presents almost identical performance as the equivalent uniform array.     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.     

GPM: A generic and scalable P2P model that optimizes tree depth for multicast communications

Group communications (real‐time and non‐real‐time) refer to one‐to‐many or many‐to‐many communications. On the one hand, multicast is considered as an appropriate solution for supporting group communication‐oriented applications (we distinguish IP network multicast from application layer multicast). On the other hand, peer‐to‐peer model tends to be a good candidate for supporting today Internet applications (e.g. P2P IPTV, P2P VoIP, etc.). In this context, P2P has attracted significant interest in the recent years. This is mainly due to its properties that also make P2P well adapted to today social networks. In this paper, we propose GPM (Generic P2P Multicast): a novel generic and scalable approach, that optimizes multicast tree depth in P2P networks (structured and unstructured), and contributes to control the network overlay latency. For multicast tree construction, the approach we propose is based on a distributed algorithm using a specific data structures (adjacency and forwarding matrixes). GPM model inherits from P2P attributes such as scalability, flexibility and fault tolerance, while taking into consideration the respective characteristics of one‐to‐many and many‐to‐many type of applications. We also give a performance evaluation for validation and comparison purposes while considering some main existing application layer multicast protocols. Copyright © 2011 John Wiley & Sons, Ltd.     

CRIM’s content-based audio copy detection system for TRECVID 2009

We report results on audio copy detection for TRECVID 2009 copy detection task. This task involves searching for transformed audio queries in over 385?h of test audio. The queries were transformed in seven different ways, three of them involved mixing unrelated speech to the original query, making it a much more difficult task. We give results with two different audio fingerprints and show that mapping each test frame to the nearest query frame (nearest-neighbor fingerprint) results in robust audio copy detection. The most difficult task in TRECVID 2009 was to detect audio copies using predetermined thresholds computed from 2008 data. We show that the nearest-neighbor fingerprints were robust to even this task and gave actual minimal normalized detection cost rate (NDCR) of around 0.06 for all the transformations. These results are close to those obtained by using the optimal threshold for each transform. This result shows the robustness of the nearest-neighbor fingerprints. These nearest-neighbor fingerprints can be efficiently computed on a graphics processing unit, leading to a very fast search.     

On Analyzing the Potential of a Layer-2 Multi-hop Authentication and Credential Delivery Scheme for Vehicular Communications

In this paper we introduce a new security architecture and security mechanisms for vehicular networks providing a layer-2 multi-hop authentication and credential delivery scheme between vehicles and the network operator authentication server. We present a performance analysis of the proposed solution under various vehicles and Access Points (APs) densities, showing the potential of our scheme in providing a more efficient, robust and scalable authentication and credential delivery to vehicles when compared against the classical single-hop scheme.     

Organic photovoltaics for low light applications

Here we report on organic photovoltaic's (OPV) suitable for low light applications. In this paper, we illustrate the impact of R_s and R_p for indoor and outdoor applications. In addition, we propose a simple physics approach to predict the behavior of organic solar cells under various illumination intensities through electrical modeling. The combination of simulation and modeling allows to define a set of design rules for OPVs under low light illumination. The performance of various organic solar cells under low light intensity is compared with our predictions and excellent correlation is found. OPV shows high performance under low light conditions.     

New temperature dependent thermal conductivity data for water-based nanofluids

This paper presents effective thermal conductivity measurements of alumina/water and copper oxide/water nanofluids. The effects of particle volume fraction, temperature and particle size were investigated. Readings at ambient temperature as well as over a relatively large temperature range were made for various particle volume fractions up to 9%. Results clearly show the predicted overall effect of an increase in the effective thermal conductivity with an increase in particle volume fraction and with a decrease in particle size. Furthermore, the relative increase in thermal conductivity was found to be more important at higher temperatures. Obtained results compare favorably with certain data sets and theoretical models found in current literature.     

Simulation of the deflected cutting tool trajectory in complex surface milling

Since industry is rapidly developing, either locally or globally, manufacturers witness harder challenges due to the growing competitivity. This urges them to better consider the four factors linked to production and output: quality, quantity, cost and price, quality being of course the most important factor which constitutes their main concern. Efforts will be concentrated??in this research??on improving the quality and securing more accuracy for a machined surface in ball-end milling. Quality and precision are two essential criteria in industrial milling. However, milling errors and imperfections, due mainly to the cutting tool deflection, hinder the full achieving of these targets. Our task, all along this paper, consists in studying and realizing the simulation of the deflected cutting tool trajectory, by using the methods which are available. In a future stage, and in the frame of a deeper research, the simulation process will help to carry out the correction and the compensation of the errors resulting from the tool deflection. The corrected trajectory which is obtained by the method mirror will be sent to the machine. To achieve this goal, the next process consists??as a first step??in selecting a model of cutting forces for a ball-end mill. This allows to define??later on??the behavior of this tool, and the emergence of three methods namely the analytical model, the finite elements method, and the experimental method. It is possible to tackle the cutting forces simulation, all along the tool trajectory, while this latter is carrying out the sweeping of the part to be machined in milling and taking into consideration the cutting conditions, as well as the geography of the workpiece. A simulation of the deflected cutting tool trajectory dependent on the cutting forces has been realized.