Absorption and scattering properties of carbon nanohorn-based nanofluids for direct sunlight absorbers

Abstract  

In the present work, we investigated the scattering and spectrally resolved absorption properties of nanofluids consisting in aqueous and glycol suspensions of single-wall carbon nanohorns. The characteristics of these nanofluids were evaluated in view of their use as sunlight absorber fluids in a solar device. The observed nanoparticle-induced differences in optical properties appeared promising, leading to a considerably higher sunlight absorption with respect to the pure base fluids. Scattered light was found to be not more than about 5% with respect to the total attenuation of light. Both these effects, together with the possible chemical functionalization of carbon nanohorns, make this new kind of nanofluids very interesting for increasing the overall efficiency of the sunlight exploiting device.     

Memory effects in annealed hybrid gold nanoparticles/block copolymer bilayers

We report on the use of the self-organization process of sputtered gold nanoparticles on a self-assembled block copolymer film deposited by horizontal precipitation Langmuir-Blodgett (HP-LB) method. The morphology and the phase-separation of a film of poly-n-butylacrylate-block-polyacrylic acid (PnBuA-b-PAA) were studied at the nanometric scale by using atomic force microscopy (AFM) and Time of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The templating capability of the PnBuA-b-PAA phase-separated film was studied by sputtering gold nanoparticles (NPs), forming a film of nanometric thickness. The effect of the polymer chain mobility onto the organization of gold nanoparticle layer was assessed by heating the obtained hybrid PnBuA-b-PAA/Au NPs bilayer at T >T _g. The nanoparticles' distribution onto the different copolymer domains was found strongly affected by the annealing treatment, showing a peculiar memory effect, which modifies the AFM phase response of the Au NPs layer onto the polar domains, without affecting their surfacial composition. The effect is discussed in terms of the peculiar morphological features induced by enhanced mobility of polymer chains on the Au NPs layer.     

Synthesis and antitumor molecular mechanism of agents based on amino 2-(3',4',5'-trimethoxybenzoyl)benzo[b]furan: inhibition of tubulin and induction of apoptosis

Induction of apoptosis is a promising strategy that could lead to the discovery of new molecules active in cancer chemotherapy. This property is generally observed when cells are treated with agents that target microtubules, dynamic structures that play a crucial role in cell division. Small molecules such as benzo[b]furans are attractive as inhibitors of tubulin polymerization. A new class of inhibitors of tubulin polymerization based on the 2-(3',4',5'-trimethoxybenzoyl)benzo[b]furan molecular skeleton, with the amino group placed at different positions on the benzene ring, were synthesized and evaluated for antiproliferative activity, inhibition of tubulin polymerization, and cell-cycle effects. The methoxy substitution pattern on the benzene portion of the benzo[b]furan moiety played an important role in affecting antiproliferative activity. In the series of 5-amino derivatives, the greatest inhibition of cell growth occurred if the methoxy substituent is placed at the C6 position, whereas C7 substitution decreases potency. The most promising compound in this series is 2-(3',4',5'-trimethoxybenzoyl)-3-methyl-5-amino-6-methoxybenzo[b]furan (3 h), which inhibits cancer cell growth at nanomolar concentrations (IC(50) =16-24 nM), and interacts strongly with tubulin by binding to the colchicine site. Sub-G(1) apoptotic cells in cultures of HL-60 and U937 cells were observed by flow cytometric analysis after treatment with 3 h in a concentration-dependent manner. We also show that compound 3 h induces apoptosis by activation of caspase-3, -8, and -9, and this is associated with cytochrome c release from mitochondria. The introduction of an α-bromoacryloyl group increased antiproliferative activity with respect to the parent amino derivatives.     

Combining scanning probe microscopy and x-ray spectroscopy

A new versatile tool, combining Shear Force Microscopy and X-Ray Spectroscopy was designed and constructed to obtain simultaneously surface topography and chemical mapping. Using a sharp optical fiber as microscope probe, it is possible to collect locally the visible luminescence of the sample. Results of tests on ZnO and on ZnWO4 thin layers are in perfect agreement with that obtained with other conventional techniques. Twin images obtained by simultaneous acquisition in near field of surface topography and of local visible light emitted by the sample under X-Ray irradiation in synchrotron environment are shown. Replacing the optical fibre by an X-ray capillary, it is possible to collect local X-ray fluorescence of the sample. Preliminary results on Co-Ti sample analysis are presented.     

N-[2-Methyl-5-(triazol-1-yl)phenyl]pyrimidin-2-amine as a scaffold for the synthesis of inhibitors of Bcr-Abl

N‐[2‐Methyl‐5‐(triazol‐1‐yl)phenyl]pyrimidin‐2‐amine derivatives were synthesized and evaluated in vitro for their potential use as inhibitors of Bcr‐Abl. The design is based on the bioisosterism between the 1,2,3‐triazole ring and the amide group. The synthesis involves a copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) as the key step, with the exclusive production of anti‐(1,4)‐triazole derivatives. One of the compounds obtained shows general activity similar to that of imatinib; in particular, it was observed to be more effective in decreasing the fundamental function of cdc25A phosphatases in the K‐562 cell line.     

Artificial-turf playing fields: contents of metals, PAHs, PCBs, PCDDs and PCDFs, inhalation exposure to PAHs and related preliminary risk assessment

The artificial-turf granulates made from recycled rubber waste are of health concern due the possible exposure of users to dangerous substances present in the rubber, and especially to PAHs. In this work, we determined the contents of PAHs, metals, non-dioxin-like PCBs (NDL-PCBs), PCDDs and PCDFs in granulates, and PAH concentrations in air during the use of the field. The purposes were to identify some potential chemical risks and to roughly assess the risk associated with inhalation exposure to PAHs. Rubber granulates were collected from 13 Italian fields and analysed for 25 metals and nine PAHs. One further granulate was analysed for NDL-PCBs, PCDDs, PCDFs and 13 PAHs. Air samples were collected on filter at two fields, using respectively a high volume static sampler close to the athletes and personal samplers worn by the athletes, and at background locations outside the fields. In the absence of specific quality standards, we evaluated the measured contents with respect to the Italian standards for soils to be reclaimed as green areas. Zn concentrations (1 to 19 g/kg) and BaP concentrations (0.02 to 11 mg/kg) in granulates largely exceeded the pertinent standards, up to two orders of magnitude. No association between the origin of the recycled rubber and the contents of PAHs and metals was observed. The sums of NDL-PCBs and WHO-TE PCDDs + PCDFs were, respectively, 0.18 and 0.67 × 10^− 5 mg/kg. The increased BaP concentrations in air, due to the use of the field, varied approximately from < 0.01 to 0.4 ng/m³, the latter referring to worst-case conditions as to the release of particle-bound PAHs. Based on the 0.4 ng/m³ concentration, an excess lifetime cancer risk of 1 × 10^− 6 was calculated for an intense 30-year activity.     

Analysis and modelling of window and glazing systems energy performance for a well insulated residential building

The energy performance of a window depends on its thermal transmittance, the glazing solar transmittance, and the air leakage due to the frame and installation airtightness.In new installations air leakage represents a quite small term which is almost independent from the window and in particular from the glazing system selection.The contributions of the two other terms to the building thermal balance are not independent to each other: the most effective thermal insulating glazing, as triple glazings, are generally characterized by low solar transmittance reducing solar gains. The thermal energy balance of the building is then affected not only in summer but also in winter, potentially increasing heating energy need.This work evaluates the impact of different kinds of glazing systems (two double and two triple glazings), window size (from 16% to 41% of window to floor area ratio), orientation of the main windowed façade and internal gains on winter and summer energy need and peak loads of a well insulated residential building. The climatic data of four localities of central and southern Europe have been considered: Paris, Milan, Nice and Rome. A statistical analysis has been performed on the results in order to identify the most influencing parameters.     

The Role of DAMPS in Burns and Hemorrhagic Shock Immune Response: Pathophysiology and Clinical Issues. Review

Severe or major burns induce a pathophysiological, immune, and inflammatory response that can persist for a long time and affect morbidity and mortality. Severe burns are followed by a “hypermetabolic response”, an inflammatory process that can be extensive and become uncontrolled, leading to a generalized catabolic state and delayed healing. Catabolism causes the upregulation of inflammatory cells and innate immune markers in various organs, which may lead to multiorgan failure and death. Burns activate immune cells and cytokine production regulated by damage-associated molecular patterns (DAMPs). Trauma has similar injury-related immune responses, whereby DAMPs are massively released in musculoskeletal injuries and elicit widespread systemic inflammation. Hemorrhagic shock is the main cause of death in trauma. It is hypovolemic, and the consequence of volume loss and the speed of blood loss manifest immediately after injury. In burns, the shock becomes evident within the first 24 h and is hypovolemic-distributive due to the severely compromised regulation of tissue perfusion and oxygen delivery caused by capillary leakage, whereby fluids shift from the intravascular to the interstitial space. In this review, we compare the pathophysiological responses to burns and trauma including their associated clinical patterns.     

Stereoselective Modulation of P‐Glycoprotein by Chiral Small Molecules

Inhibition of drug efflux pumps such as P‐glycoprotein (P‐gp) is an approach toward combating multidrug resistance, which is a significant hurdle in current cancer treatments. To address this, N‐substituted aryloxymethyl pyrrolidines were designed and synthesized in their homochiral forms in order to investigate the stereochemical requirements for the binding site of P‐gp. Our study provides evidence that the chiral property of molecules could be a strategy for improving the capacity for interacting with P‐gp, as the most active compounds of the series stereoselectively modulated this efflux pump. The naphthalene‐1‐yl analogue (R)‐2‐[(2,3‐dichlorophenoxy)methyl]‐1‐(naphthalen‐1‐ylmethyl)pyrrolidine) [(R)‐ 7 a ] emerged foremost for its potency and stereoselectivity toward P‐gp, with the S enantiomer being nearly inactive. The modulation of P‐gp by (R)‐ 7 a involved consumption of ATP, thus demonstrating that the compound behaves as a P‐gp substrate.     

Clustering of Coated Droplets in Clay‐Filled Polymer Blends

The selective positioning of clay platelets at the polymer/polymer interface in a blend with drop/matrix morphology has a contrasting effect: on the one hand, it promotes a refinement of the morphology during the intense flows which occur during melt compounding; on the other hand, it induces coarsening in the course of prolonged slow flows experienced during rheological analysis. Rather than to a usual coalescence process, the increase of the average sizes of the dispersed phase is primarily due to a clustering mechanism of clay‐coated droplets, which keep their individuality inside the clusters because of the elastic connotation of the layered interface.