Optimum Structural and Manufacturing Design of a Braided Hollow Composite Part

Simultaneous material consolidation and shaping, as performed in manufacturing of composite materials, causes a strong interconnection between structural and manufacturing parameters which makes the design process complicated. In this paper, the design of a carbon fiber bicycle stem is examined through the application of a multi-objective optimization method to illustrate the interconnection between structural and manufacturing objectives. To demonstrate the proposed method, a test case dealing with the design of composite part with complex geometry, small size and hollow structure is described. Bladder-assisted Resin Transfer Molding is chosen as the manufacturing method. A finite element model of the stem is created to evaluate the objectives of the structural design, while a simplified 2D model is used to simulate the flow inside the preform during the injection process. Both models are formulated to take into account the variation of fiber orientation, thickness and fiber volume fraction as a function of braid diameters, injection pressure and bladder pressure. Finally, a multiobjective optimization method, called Normalized Normal Constraint Method, is used to find a set of solutions that simultaneously optimizes weight, filling time and strength. The solution to the problem is a set of optimum designs which represent the Pareto frontier of the problem. Pareto frontier helps to gain insight into the trade-off among objectives, whose presence and importance is confirmed by the numerical results presented in this paper.     

Engineered Cobalt Single-Atoms@BiFeO3 Heteronanostructures for Highly Efficient Solar Water Oxidation

Efficient charge–carrier separation and their utilization are the key factors in overcoming sluggish four-electron reaction kinetics involved in photocatalytic oxygen evolution. Here, a novel study demonstrates the significance of Na₂S₂O₈ as a sacrificial agent in comparison to AgNO₃. Resultantly, BiFeO₃ (BFO) and titanium doped-oxygen deficient BiFeO₃ (Ti-BFO-R) nanostructures achieve ≈64 and 44.5 times higher O₂ evolution in the presence of Na₂S₂O₈ compared to AgNO₃ as a sacrificial agent, respectively. Furthermore, the presence of Co single atoms (Co-SAs) deposited via immersion method on BFO and Ti-BFO-R nanostructures led to achieving outstanding O₂ evolution at a rate of 16.11 and 23.89 mmol g⁻¹ h⁻¹, respectively, which is 153 and 227.5 times higher compared to BFO (in the presence of AgNO₃), the highest O₂ evolution observed for BFO-based materials to date. The successful deposition of Co-SAs is confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC HAADF-STEM) and X-ray absorption near-edge structure (XANES). The charge transfer investigations confirm the significance of Co-SAs on BFO-based photocatalysts for improved charge–carrier separation, transport, and utilization. This novel study validates the excellent role of Na₂S₂O₈ as a sacrificial agent and Co-SAs as a cocatalyst for BFO-based nanostructures for efficient O₂ evolution.     

Who profits from the Canadian nanotechnology reward system? Implications for gender-responsible innovation

Scientometrics - Gender equality is one of the primary dimensions of responsible research and innovation. Based on bibliometric and survey data of nanotechnology researchers in Canada, this paper...     

Progressive Collapse Analysis of Cable-Stayed Bridges

Journal of Failure Analysis and Prevention - Several codes have proposed guidelines to prevent progressive collapse. Although most of these standards are in progress, few recommendations for...     

Carcass performance and meat mineral content in Balouchi lamb fed pistachio by-products

This experiment investigated the effect of pistachio by-products (PB) in the feed of weaned Balouchi lambs on their daily gain, carcass traits and on the levels of Ca, Zn, Fe and Cu of Longissimus dorsi muscle. Twenty eight male lambs were divided into four groups with 7 lambs each and fed separately for 90days. The first group (control) was fed a commercial concentrate, and the second, third and fourth (test) groups received diets in which 10, 20 and 30% PB was used in partial replacement of alfalfa hay and beet pulp. The results showed that the high level of PB had no effect on performance and carcass traits. There were no significant differences between groups in mineral content in Longissimus dorsi muscle. These results suggested that PB can be use in diet of fattening lambs up to 30% without any adverse effects on carcass performance and mineral content of lamb meat.     

Physicochemical assessment of fresh chilled dairy dessert supplemented with wheat germ

Wheat germ is an available and economical source of protein, vitamins and antioxidants with an increasing application in food products. The main aim of this study was to investigate the effects of different levels (0.0, 2.5, 5.0, 7.5 and 10.0%) and particle sizes (120, 210 and 354 μm) of wheat germ on physicochemical properties of fresh chilled dairy dessert. With increasing wheat germ level, dry matter of the dessert increased while the pH decreased. Particle size had no significant effect on these parameters. Increasing the wheat germ content and particle size enhanced darkness, hardness, cohesiveness and gumminess of the desserts while decreasing springiness and water release of the samples. Wheat germ level had greater effects on different quality aspects of the desserts than its particle size. The most acceptable dessert was produced with no more than 5.0% wheat germ with either of the particle sizes used in this study.     

Immobilized iron Schiff base histidine complexes on Al-MCM-41 and zeolite Y as catalyst for oxidation of cycloalkanes

Iron complexes of N-salicylidene-l-histidine with or without bipyridine ligand immobilized on Al-MCM-41 and zeolite Y designated as Fe(sal-l-his)(bipy)complex/Al-MCM-41 or Fe(sal-l-his)complex/Al-MCM-41 and Fe(sal-l-his)(bpy)complex/Y or Fe(sal-l-his)complex/Y respectively, were prepared and characterized by X-ray powder diffraction (XRD), FT-IR, N₂ adsorption/desorption and chemical analysis techniques. Fe(sal-l-his)/Al-MCM-41 and Fe(sal-l-his)(bipy)complex/Al-MCM-41 were found to successfully catalyze the oxidation of cyclohexane, methyl cyclohexane, cyclooctane and adamantane with H₂O₂. The oxidation results and promising catalytic behavior of Fe(sal-l-his)(bipy)complex/Al-MCM-41 for oxidation of cyclooctane with 90 % conversion and excellent selectivity toward the formation of cyclooctanone will be discussed in this presentation.     

Structural Features of（Ce,La or Sr）（Mn or Co）O_3 NanoPerovskites as a Catalyst for Carbon Monoxide Oxidation

The collection of different cations in the A and B sites of ABO3 was explored for the regularity of perovskites phase formability.Here,Sr2？,La3？,and Ce4？are selected as the cations of site A.The site B is considered to be Mn or Co cations.XRD analysis and Fourier transform infrared spectroscopy results confirm the formation of perovskite structure for catalysts in which La3？and Sr2？are considered as the cations of site A.Ceria is detected as the main crystalline phase when Ce4？is selected to be cation of site A.It is found that the octahedral factor（rB/rO） takes the same important role as the tolerance factor to form cubic perovskite.Average crystallite size of the products was calculated by data of the XRD and measured by the TEM analysis.Results of the XRD and TEM studies were supported by the study of the particles size distribution,which was carried out in a particle size analyzer.The perovskite samples were also used for stoichiometric oxidation of carbon monoxide with air.