Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Dynamic thread mapping of shared memory applications by exploiting cache coherence protocols

In current computer architectures, the communication performance between threads varies depending on the memory hierarchy. This performance difference must be considered when mapping parallel applications to processor cores. In parallel applications based on the shared memory paradigm, the communication is difficult to detect because it is implicit. Furthermore, dynamic mapping introduces several challenges, since it needs to find a suitable mapping and migrate the threads with a low overhead during the execution of the application. We propose a mechanism to detect the communication pattern of shared memory applications by monitoring cache coherence protocols. We also propose heuristics that, combined with our communication detection mechanism, allow the mapping to be performed dynamically by the operating system. Experiments with the NAS Parallel Benchmarks showed a reduction of up to 13.9% of the execution time, 30.5% of the cache misses and 39.4% of the number of invalidation messages.     

Production of β-SiC by pyrolysis of rice husk in gas furnaces

Short fibers and fine particles of β-SiC were obtained by pyrolysis of Colombian rice husk (RH). The synthesis of SiC was carried out in a gas furnace: a mathematical model was developed in order to design and build this equipment and the process was optimized using an experimental design that included variables such as temperature, pyrolysis time, type of catalyst, and process atmosphere. The obtained material was characterized by using FTIR, DRX and SEM for microstructural characterization and EDS technique for chemical analysis.     

Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend

The modification of the interface in immiscible polymer blends is critical in order to optimize physical properties. Despite the great commercial importance of polymer blends, many aspects of the emulsification process remain unclear In this paper, it will be shown that an emulsification curve can be used to estimate the influence of the architecture molar mass of styrene/hydrogenated butadiene block copolymer interfacial modifiers on the emulsifion of polystyrene/ethylene-propylene rubber blends under melt processing conditions. An expression for eing the critical amount of copolymer to saturate the interface, as well as aspects concerning the localisation of the modifier in the blend system will also be addressed.     

Eddy characteristics on mass transfer close to free interface

The velocity fluctuations in the immediate vicinity of a free interface were measured with a hot film anemometer. And mass transfer rates and eddy exposure times were analyzed by using the method of deterministic approach. These mass transfer rates were compared with the mass transfer rates by means of concentration measurements in the air-water system. The eddy exposure time distributions obtained from velocity data were skewed toward the lower time value. The contribution of eddies wi:h small exposure time was increased as the liquid became more turbulent. The mass transfer rates were mainly contributed by the Prandtl size eddies and even larger eddies. The mass transfer predictions by the single eddy model employing a deterministic method were in good agreement with the experimental results by independent measurements of concentration.     

Robust control of variable speed autonomous underwater vehicle

Set point tracking control of autonomous underwater vehicle (AUV) via robust model predictive control (RMPC) is considered. Input-constrained RMPC with integral action, which has been developed in our previous work, is used to control the AUV in this study. In order to derive a RMPC control rule, non-linear dynamics of AUV with six degree of freedom is linearized at certain operating points. So, horizontal and vertical plane dynamics of system are represented by linear models which have polytopic uncertainties. Since the derived control rule will be used in real time, the computation time should be reduced. To overcome this computational time problem and get rid of trial–error step of Algorithm 1, a new algorithm is proposed here. The simulations are carried out using the control rule based on this algorithm and these results are presented.     

Efficient Binary Tomographic Reconstruction

Tomographic reconstruction of a binary image from few projections is considered. A novel heuristic algorithm is proposed, the central element of which is a nonlinear transformation ψ(p)=log(p/(1?p)) of the probability p that a pixel of the sought image be 1-valued. It consists of backprojections based on ψ(p) and iterative corrections. Application of this algorithm to a series of artificial test cases leads to exact binary reconstructions, (i.e., recovery of the binary image for each single pixel) from the knowledge of projection data over a few directions. Images up to 10⁶ pixels are reconstructed in a few seconds. A series of test cases is performed for comparison with previous methods, showing a better efficiency and reduced computation times.     

Characterization of Maximum Likelihood Solutions to Image Reconstruction in Photon Emission Tomography

For photon emission tomography, the maximum likelihood (ML) estimator for image reconstruction is generally solution to a nonlinear equation involving the vector of measured data. No explicit closed-form solution is known in general for such a nonlinear ML equation, and numerical resolution is usually implemented, with a very popular iterative method formed by the expectation-maximization algorithm. The numerical character of such resolutions usually makes it difficult to obtain a general characterization of the performance of the ML solution. We show that the nonlinear ML equation can be replaced by an equivalent system of two dual linear equations nonlinearly coupled. This formulation allows us to exhibit explicit (to some extent) forms for the solutions to the ML equation, in general conditions corresponding to the various possible configurations of the imaging system, and to characterize their performance with expressions for the mean-squared error, bias and Cramér-Rao bound. The approach especially applies to characterize the ML solutions obtained numerically, and offers a theoretical framework to contribute to better appreciation of the capabilities of ML reconstruction in photon emission tomography.     

Preparation and characterization of syndiotactic polystyrene/ethylene‐propylene copolymer blends

The reactive compatibilization of syndiotactic polystyrene (sPS)/oxazoline‐styrene copolymer (RPS)/maleic anhydride grafted ethylene‐propylene copolymer (EPR‐MA) blends is investigated in this study. First, the miscibility of sPS/RPS blends is examined by thermal analysis. The cold crystallization peak (T_cc) moved toward higher temperature with increased PRS, and, concerning enthalpy relaxation behaviors, only a single enthalpy relation peak was found in all aged samples. These results indicate that the sPS/RPS blend is miscible along the various compositions and RPS can be used in the reactive compatibilization of sPS/RPS/EPR‐MA blends. The reactive compatibilized sPS/RPS/EPR‐MA blends showed finer morphology than sPS/EPR‐MA physical blends and higher storage modulus (G') and complex viscosity (η*) when RPS contents were increased. Moreover, the impact strength of sPS/RPS/EPR‐MA increased significantly compared to sPS/EPR‐MA blend, and SEM micrographs after impact testing show that the sPS/RPS/EPR‐MA blend has better adhesion between the sPS matrix and the dispersed EPR‐MA phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2084–2091, 2002