Integrated electro-optic lens/scanner in a LiTaO3 single crystal

We report what we believe to be the first stand-alone integrated electro-optic lens and scanner fabricated on a single crystal of Z-cut LiTaO(3). The independently controlled lens and scanner components consist of lithographically defined domain-inverted regions extending through the thickness of the crystal. A lens power of 0.233 cm(-1) kV(-1) and a deflection angle of 12.68 mrad kV(-1) were observed at the output of the device.     

Analyses of Two Different 1-Server Systems

In this paper, the availability and the reliability of two 1-server systems with redundancy have been obtained. System 1 consists of n subsystems in series; each subsystem consists of two redundant i.i.d. components in `parallel' (cold standby) and one server. The times to failure of the components are exponentially distributed; their repair time distributions are arbitrary and different. System 2 consists of n dissimilar units and one server. The times to failure of the units are arbitrarily distributed; the repair rates are constant but all different. Explicit expressions for the Laplace transform of the mean down-time of the system in (0, t) and for the mean time to system failure have been obtained. A few particular cases are discussed.     

Changes in the glaciers of Chandra–Bhaga basin,Himachal Himalaya,India, between 1980 and 2010 measured using remote sensing

This study reports the glacier changes of Chandra–Bhaga basin, northwest Himalaya, India, from 1980 to 2010. Satellite remote-sensing data from the Landsat Multispectral Scanner (MSS) and Thematic Mapper (TM), the Linear Imaging Self Scanning Sensor (LISS) and Advanced Wide Field Sensor (AWiFS) of the Indian Remote Sensing (IRS) series, and the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) were used to study the changes in glacier parameters such as glacier area, length, snout elevation, and the impact of glacier topographical parameters (glacier slope, aspect, and altitude range) on the glacier changes. It was found that the total glaciated area had shrunk to 368.2 km² in 2010 from 377.6 km² in 1980, a loss of 2.5%. The average position of glacier terminuses retreated by 465.5 ± 169.1 m from 1980 to 2010 with an average rate of 15.5 ± 5.6 m year^?1. The decadal scale analysis showed that the average rate of retreat had increased the most in the recent decade. A moraine-dammed lake located in the study region was found to have expanded in area from (0.65 ± 0.01) km² in 1980 to (1.26 ± 0.03) km² in 2010. Glaciers with steep slope and less altitude range have lost more area than the glaciers having gentle slope and greater altitude range.     

Polarization measurements on single-step co-fired solid oxide fuel cells (SOFCs)

Anode-supported planar solid oxide fuel cells (SOFC) were successfully fabricated by a single step co-firing process. The cells comprised of a Ni + yttria-stabilized zirconia (YSZ) anode, a YSZ or scandia-stabilized zirconia (ScSZ) electrolyte, a (La_0.85Ca_0.15)_0.97MnO₃ (LCM) + YSZ cathode active layer, and an LCM cathode current collector layer. The fabrication process involved tape casting of the anode, screen printing of the electrolyte and the cathode, and single step co-firing of the green-state cells in the temperature range of 1300–1330 °C for 2 h. Cells were tested in the temperature range of 700–800 °C with humidified hydrogen as fuel and air as oxidant. Cell test results and polarization modeling showed that the polarization losses were dominated by the ohmic loss associated with the electrodes and the activation polarization of the cathode, and that the ohmic loss due to the ionic resistance of the electrolyte and the activation polarization of the anode were relatively insignificant. Ohmic resistance associated with the electrode was lowered by improving the electrical contact between the electrode and the current collector. Activation polarization of the cathode was reduced by the improvement of the microstructure of the cathode active layer and lowering the cell sintering temperature. The cell performance was further improved by increasing the porosity in the anode. As a result, the maximum power density of 1.5 W cm⁻² was achieved at 800 °C with humidified hydrogen and air.     

Enhanced electrocatalytic performance of cyano groups containing conducting polymer supported catalyst for oxidation of formic acid

A new palladium (Pd) based catalyst was developed using poly(diphenylamine-co-3-aminobenzonitrile) (P(DPA-co-3ABN)) as the new catalyst support. The sizes, distribution and stability of Pd nanoparticles (Pd NPs) are strongly influenced by the cyano group (–CN) present in P(DPA-co-3ABN). Field emission scanning electron microscopy image and energy dispersive x-ray analysis revealed good dispersion of Pd NP onto P(DPA-co-3ABN) matrix. The electrocatalytic activity of P(DPA-co-3ABN)/Pd catalyst electrode (CE) was investigated in terms of formic acid (FA) electro oxidation. The onset potential and catalytic current for the electro oxidation of FA are higher at P(DPA-co-3ABN)/Pd-CE as compared to PdNPs loaded pristine PDPA catalyst electrode (PDPA/Pd-CE). P(DPA-co-3ABN)/Pd-CE exhibited 18 time higher electrocatalytic current than PDPA/Pd-CE for oxidation of FA.     

Higher moments in cost-benefit analysis

This paper deals with the cost-benefit analysis of one-server two-unit hot standby system with imperfect switch where the repair densities depend upon the type of items (unit/standby/switch) waiting for repair. Initially one unit is put to operation (switch is working at t = 0) and the other unit is kept as a hot standby. The revenue as well as the cost of repair are arbitrary functions of time. Explicit expressions are obtained for expected net gain in [0,t] from which other characteristics like expected busy period due to repair of unit/standby/switch, expected up-time, expected number of repairs completed of unit/standby/switch etc. can be obtained.     

Composite electrodes consisting of platinum particles and polyaniline nanowires as electrocatalysts for methanol oxidation

Polyaniline (PANI) with nanowire (PANI‐(NW)) network structure (mean diameter 10–20 nm) was successfully deposited on a stainless steel (SS) electrode by a galvanostatic process. Platinum particles were deposited into the PANI nanowire network structure to result the PANI(NW)‐Pt composite electrode. The PANI(NW)‐Pt electrode was used as electrocatalysts for the electrochemical oxidation of methanol. The PANI nanowires and PANI(NW)‐Pt nanocomposite were characterized by scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV–vis absorption spectroscopy. Nanowire morphology with an average diameter of 10–20 nm could be seen from scanning electron micrograph. Small amount (70 mμm) of spherical Pt particles could be deposited into the PANI(NW). Catalytic activity for the oxidation of methanol was studied by using cyclic voltammetry (CV). For comparative purposes, bulk Pt (deposited Pt on SS) and PANI nanowires based electrodes were tested. The PANI(NW)‐Pt nanocomposite electrode exhibited excellent catalytic activity for the electrooxidation of methanol in comparison to bulk Pt electrodes, which reveals that the PANI(NW)‐Pt nanocomposite electrodeis more promising for application in electrocatalyst as a support material. POLYM. COMPOS., 28:650–656, 2007. © 2007 Society of Plastics Engineers     

Hydrogen generation rate enhancement by in situ Fe(0) and nitroarene substrates in Fe3O4@Pd catalyzed ammonia borane hydrolysis and nitroarene reduction tandem reaction

We report the catalytic enhancement of hydrogen generation by 1) in situ Fe (0) formed and 2) nitroarenes substrates during Fe₃O₄@Pd core-shell nanoparticles catalyzed tandem reaction. The active hydrogen species are generated in Pd shell, which either combine to form H₂ gas or take part in relatively faster nitroarene reduction reaction. The rate of hydrogen generation from ammonia borane is dependent on the nitroarene substrate and is higher when 4-nitrophenol is used. This is due to the difference in ammonia borane adsorption on the surface of the catalyst. During recyclability, the H₂ generation rate of 2 wt% Pd loaded samples is higher than other compositions. Such an enhancement has been attributed to the formation of Fe (0) via γ-FeOOH mediated by Pd species, presumably through Pd(OH)₂. The electronic connection between Fe and Pd interface is thus shown to play an important role in the catalytic enhancement of the tandem reaction.     

Room temperature flash of single crystal titania: Electronic and optical properties

A single-crystal specimen of rutile (titania) was flashed repetitively, while increasing the electric field after each cycle. As expected, the flash onset temperature continued to drop modestly at higher fields. However, when the field was increased from 400 to 450 V cm^–1, the flashed onset fell dramatically down to room temperature. We have investigated the electrical and optical properties of this room temperature flashed specimen (called SZ). The specimen was electronically conducting. Optical absorption spectroscopy revealed a narrow band of new energy levels that were generated just below the conduction band. The gap between the conduction band and this flash-induced energy level agreed with the peak in the electroluminescence spectrum. Optical second harmonic generation (SHG) is reported. The flash-on condition significantly lowered the SHG, which rebounded when the flash was turned off. This result suggests that the structure becomes more centrosymmetric in the state of flash, which may represent a disordered state of defects. The possibility of studying flash behavior at room temperature, without a furnace (as in SZ type specimens), opens a considerable simplification for in-situ characterization of flash behavior. For example, a possible relationship between memristor physics and the flash phenomenon can be studied.