Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Studies of elemental distributions within discrete coal macerals: Use of secondary ion mass spectrometry and X-ray photoelectron spectroscopy

Secondary ion mass spectrometry has been used to measure qualitatively the distributions of many trace and minor elements within some well-characterized coal macerals: vitrinite, fusinite and exinite. Complementary information was obtained by using X-ray photoelectron spectroscopy. Within the vitrinite specimens studied, a widely-dispersed largely inorganic aluminosilicate phase was identified, which contained a number of other trace elements. By contrast, within the organic-rich phase of this macerai, titanium was detected in a very even distribution; this suggests that some titanium may be bonded in an organic complex. The fusinite was shown to contain elevated concentrations of calcium, magnesium and fluorine, dispersed over a large portion of the maceral. The high fluorine content could be identified as an organo-fluoro compound using XPS. Exinite was found to contain lower concentrations of most elements, compared to other macerals. The organic composition of this maceral was significantly different from that of surrounding macerals; this could be seen from the enhanced emission of the C₂H₂-secondary ion and images of this ion thus clearly outlined the position of such macerals.     

The role of experience in liking "read-to-drink" alcoholic beverages.

Ready-to-drinks (RTDs) are composed of an alcoholic component and a soft-drink base and are primarily consumed by a youth market. The authors explored whether liking and experience with an RTD soft-drink base predicts liking for the RTD. Participants (N=350) from ages 12 to 30 years sampled 3 RTDs and their respective soft-drink and alcoholic components. For milk- and fruit-based RTDs, liking for and familiarity with their soft-drink base was the best predictor of liking for and familiarity with the RTD itself. For the Coke-based RTD, familiarity with and liking for bourbon best predicted familiarity with and liking for the RTD. All of these effects were consistent across blind and nonblind testing. The authors' results suggest that where there is perceptual similarity between the RTD and its soft-drink base, these beverages may provide an easy transition into alcohol consumption for novice drinkers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pressure ratings of mechanical seals

Although mechanical seals are widely used in many machines, there is no universally accepted system for establishing limits of pressure, temperature, and speed. As a result, manufacturers of mechanical seals may use different methods for establishing these limits. In turn, users of mechanical seals sometimes have their own rating system. Presented here is a general discussion of the difficulties involved in establishing limits along with some specific issues related to seals used in centrifugal pumps.     

The lack of long-term detrimental effects on liver allografts caused by donor-specific anti-HLA antibodies

Recent reports indicate a higher incidence of both acute and chronic liver allograft rejection when, at the time of transplantation, the recipients serum contains donor-specific anti-HLA antibodies. From 9/89 to 5/91, 133 liver allografts were performed at our institution. Thirteen liver recipients had donor-specific IgG anti-HLA antibodies (complement-fixing) at the time of transplantation. In eleven patients, antibodies reacted to donor class I antigens while in 1 patient the donor-specific antibody had class II reactivity. Twelve patients have been followed for a minimum of 12 months (median 18 months, range 28-12 months). No hyperacute rejection was seen in any of the cases and four patients had acute rejections. Thus far only one of the twelve patients has biopsy evidence suggestive of chronic liver injury. The remaining have normal liver enzymes and bilirubin. Three of these twelve patients died (one from a myocardial infarction and the others from sepsis) accounting for a one-year graft survival of 75%. There was no significant statistical difference in the one-year graft survival in those recipients without donor-specific antibodies (i.e., 80.5%). In eight of the twelve patients, pretransplant preformed antibody level (PRA) was > 50%. In six of the thirteen patients donor-specific antibody was present at dilutions greater than 1:64. As previously reported, the donor-specific antibody disappeared from the serum posttransplant within hours and did not reappear. In vitro studies demonstrated no factor in portal or hepatic artery blood that could inhibit rabbit complement mediated lysis of anti-HLA antibodies. We conclude that it is not a contraindication to do liver transplants in the presence of donor-specific anti-HLA antibodies.     

An outbreak of malignant catarrhal fever in young rusa deer (Cervus timorensis)

On the basis of clinical signs and histological findings eight 9-month-old male rusa deer (Cervus timorensis) were diagnosed with sheep associated-malignant catarrhal fever. Following a variable course involving rectal temperatures around 40.5 degrees C, depression, inappetence, diarrhoea, corneal opacity and hypopyon all animals died or were euthanased over a 5-week period. Severe multifocal vasculitis, mainly periglomerular and in the arcuate vessels were consistent histological findings which in the past have been adequate to confirm clinical diagnosis of sheep associated-malignant catarrhal fever. A nested polymerase chain reaction test has been used to detect a sheep associated-malignant catarrhal fever PRC product, 238 base-pairs in size, in DNA extracted from lymphocyte preparations. The result supported the diagnosis of sheep associated-malignant catarrhal fever in these deer.     

Determination of land and ocean reflective, radiative, andbiophysical properties using multiangle imaging

Knowledge of the directional and hemispherical reflectance properties of natural surfaces, such as soils and vegetation canopies, is essential for classification studies and canopy model inversion. The Multi-angle Imaging SpectroRadiometer (MISR), an instrument to be launched in 1998 onboard the EOS-AM1 platform, will make global observations of the Earth's surface at 1.1-km spatial resolution, with the objective of determining the atmospherically corrected reflectance properties of most of the land surface and the tropical ocean. The algorithms to retrieve surface directional reflectances, albedos, and selected biophysical parameters using MISR data are described. Since part of the MISR data analyses includes an aerosol retrieval, it is assumed that the optical properties of the atmosphere (i.e. aerosol characteristics) have been determined well enough to accurately model the radiative transfer process. The core surface retrieval algorithms are tested on simulated MISR data, computed using realistic surface reflectance and aerosol models, and the sensitivity of the retrieved directional and hemispherical reflectances to aerosol type and column amount is illustrated. Included is a summary list of the MISR surface products     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.