Wedged multilayer Laue lens

A multilayer Laue lens (MLL) is an x-ray focusing optic fabricated from a multilayer structure consisting of thousands of layers of two different materials produced by thin-film deposition. The sequence of layer thicknesses is controlled to satisfy the Fresnel zone plate law and the multilayer is sectioned to form the optic. An improved MLL geometry can be created by growing each layer with an in-plane thickness gradient to form a wedge, so that every interface makes the correct angle with the incident beam for symmetric Bragg diffraction. The ultimate hard x-ray focusing performance of a wedged MLL has been predicted to be significantly better than that of a nonwedged MLL, giving subnanometer resolution with high efficiency. Here, we describe a method to deposit the multilayer structure needed for an ideal wedged MLL and report our initial deposition results to produce these structures.     

Constructing virtual environments for manufacturing simulation

Virtual environments (VE) are becoming an important tool for simulating manufacturing systems. A problem in their adoption is the lack of an easy and effective approach to building large and complex virtual environments that are required by many manufacturing simulation tasks. This paper reports on research into this problem and presents a novel approach - domain-analysis-based top-down construction - to constructing complex virtual manufacturing environments. Based on this approach, a software system is designed and implemented to provide easy-to-use and flexible tools that enable users to construct virtual environments rapidly and with minimum modelling effort.     

Evaluation of fire performance of organic fire retardant free acrylic based coatings applied on various building materials by cone calorimetric method

Fire performance of water‐based plaster systems containing acrylic copolymer binder and non‐flammable mineral and ceramic fillers intended for decorative coating application was determined by cone calorimetric method. The coatings were applied on common building substrate materials used in construction sector, namely, Medium Density Fibre (MDF) boards, Gypsum Boards (GIB) and Stainless Steel (SS), and the different plaster finishes attempted on these substrates were Tierrafino, Suave and Bone China respectively. Group numbers of the different test samples were also evaluated following the Kokkala method. Based on various measurements, especially heat release, smoke evolution, mass loss data and the Group number estimates, it is evident that these organic fire retardant free coatings can offer good fire safety if applied on appropriate substrates like GIB or SS. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydraulic characteristics and startup of anaerobic rotating biological contactors

Abstract

In this study the hydraulic characteristics and the start‐up of anaerobic rotating biological contactor (AnRBC) were investigated experimentally and theoretically. Results of tracer study showed that the AnRBC reactor is a well‐mixed reactor in the first and second stages. Start‐up of the AnRBC reactor was successfully carried out using high strength synthetic wastewaters at hydraulic retention time of 21.6 hours, organic surface loading of 111.4 g‐COD/m²?d, organic volumetric loading of 13.33 Kg‐COD/m³?d, disk rotational speed of 12 rpm and 100% disk submergence. In the steady‐state operating condition, the removal efficiencies of soluble COD and BOD could be up to 71% and 76% for the inlet COD and BOD concentrations of 12,000 and 7,267 mgL^‐1, respectively. The microscopic observations after start‐up of the AnRBC reactor showed that the acetogenic bacteria are significant in the first two stages while the methanogenic bacteria predominate in the last two stages.     

A Critical Grain Size Concept to Predict the Impact Transition Temperature of Ti-Microalloyed Steels

Based on the assumption that local principal stress remains the same everywhere within a ferrite grain, a critical value of grain size can be determined for a fixed TiN particle size. When the grain size is smaller than the critical size, grain boundary is expected to resist the propagation of a micro-crack that is initiated from a TiN particle. Using this concept, an attempt has been made to predict the local cleavage fracture stress and 27J impact transition temperature (ITT) of different Ti-microalloyed steels, which were subjected to (instrumented) Charpy impact testing.     

Carbohydrate polymers of chirata (Swertia chirata) leaves: Structural features, in vitro anti-oxidant activity and fluorescence quenching study

Chirata (Swertia chirata) is widely used in Indian folk medicine for the prevention of various disorders. Herein, we analyzed the water-extracted carbohydrate polymer (WECP) of this herb using chemical, chromatographic, and spectroscopic methods. The anti-oxidant capacity of this fraction was studied by ferric reducing anti-oxidant power (FRAP) and DPPH radical assays. Effect of WECP on bovine serum albumin spectrum (BSA) was determined using excitation wavelength of 282 nm. Anion exchange chromatography of WECP yielded 5 fractions (F1–F5) with different chemical compositions. The major fraction (F5) was homogeneous, had an apparent molecular mass of 4.5 kDa, and contains both carbohydrates (57%) and phenolics (34%). The anti-oxidant capacities of WECP and F5 were comparable to standard anti-oxidants. Notably, activities of the carbohydrate polymers (F1–F5) correlate with their phenolics content. Fluorescence quenching measurement suggests that F5 can form complex with BSA and the value of the binding constant is K=6.28×10⁵/M.     

Separation of acid–water mixtures by pervaporation using nanoparticle filled mixed matrix copolymer membranes

BACKGROUND: Low energy and less expensive membrane based separation of acetic acid‐water mixtures would be a better alternative to conventional separation processes. However, suitable acid resistant membranes are still lacking. Thus, the objective of the present study was to develop mixed matrix membrane (MMM) which would allow high flux and water selectivity over a wide range of feed concentrations of acid in water. RESULTS: Three MMMs, namely PANBA0.5, PANBA1.5 and PANBA3 were made by emulsion copolymerization of acrylonitrile (AN) and butyl acrylate (BA) with 5.5:1 comonomer ratio and in situ incorporation of 0.5, 1.5 and 3 wt%, sodium montmorilonite (Na‐MMT) nanofillers, respectively. For a feed concentration of 99.5 wt% of acid in water the membranes show good permeation flux (2.61, 3.19, 3.97 kg m^?2 h^?1 µm^?1, for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) and very high separation factors for water (1473, 1370, 1292 for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) at 30 °C. Similarly for a dilute acid–water solution, i.e. for 71.6 wt% acid the membrane showed a very high thickness normalize flux (8.67, 9.44, 11.56 kg m^?2 h^?1 µm^?1, for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) and good water selectivity (101.7, 95.3, 79 for PANBA0.5, PANBA1.5 and PANBA3 membrane, respectively) at the same feed temperature. The permeation ratio, permeability, diffusion coefficient and activation energy for permeation of the membranes were also estimated. CONCLUSION: Unlike most of the reported membranes, the present MMMs allowed high flux and selectivity over a wide range of feed concentrations. These membranes may also be effective for separating other similar organic‐water mixtures. Copyright © 2012 Society of Chemical Industry     

Preparation of poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filament by melt spinning

Poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filaments with various ratios of PCL and PLCL were prepared by melt spinning. The effect of PLCL content on the physical properties of the blended filament was investigated. The melt spinning of the blend was carried out and the as spun filament was subsequently subjected to drawing and heat setting process. The addition of PLCL caused significant changes in the mechanical properties of the filaments. Crystallinity of blend decreased with the addition of PLCL as observed by X‐ray diffraction (XRD) and differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) revealed that the fracture surface becomes rougher at higher PLCL content. It may be proposed that PCL and PLCL show limited interaction within the blend matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012