Electrical measurement of the junction temperature of an RF powertransistor

An enhanced electrical method is presented for measuring the average junction temperature of an RF bipolar transistor. A two-step procedure, previously developed for DC operation, is extended to include the junction temperature measurement for an RF power transistor in a tuned amplifier circuit. The measurement technique is convenient, since it can be used with normal, packaged devices, and does not require a complex heat flow model or ambient temperature measurements     

New CMOS compatible junction-isolated lateral base resistancecontrolled thyristor

A new 550 V lateral base resistance controlled thyristor structure is proposed and its operation is rigorously characterised by two-dimensional numerical simulation in the off-state, on-state, and turn-off transient mode. Simulations indicate a 40% lower forward voltage drop over a comparable LIGBT, and a superior switching property over other competing lateral thyristor structures     

Utilization of the new mineral Uf membranes for making semi-hard cheeses

By using an UF apparatus equipped with new mineral membranes making it possible to reach a protein content of 21% and a T.S. content of 45%, making semi-hard cheese such as the French variety St. Paulin was studied. Properties of precheeses were characterized for defining optimum parameters of the proposed process. Acidification, addition of salt, renneting pH, and temperature were studied for their influence regarding the rheological behavior of the precheese and/or the organoleptic qualities of young and ripened cheese. Advantages of the process: increase of 199 of the cheese yield, no in vat processing, possible addition of flavouring substances are discussed. Performances observed with the new UF equipment (30 l of milk treated per hour and m²) and its cleanability offer sufficient reliability to envisage an industrial scale up.     

Epoxidation of Canola Oil with Hydrogen Peroxide Catalyzed by Acidic Ion Exchange Resin

Canola oil with an iodine value of 112/100 g, and containing 60% oleic acid and 20% linoleic acid, was epoxidised using a peroxyacid generated in situ from hydrogen peroxide and a carboxylic acid (acetic or formic acid) in the presence of an acidic ion exchange resin (AIER), Amberlite IR 120H. Acetic acid was found to be a better oxygen carrier than formic acid, as it produced about 10% more conversion of ethylenic unsaturation to oxirane than that produced by formic acid under otherwise identical conditions. A detailed process developmental study was then performed with the acetic acid/AIER combination. The parameters optimised were temperature (65 °C), acetic acid to ethylenic unsaturation molar ratio (0.5), hydrogen peroxide to ethylenic unsaturation molar ratio (1.5), and AIER loading (22%). An iodine conversion of 88.4% and a relative conversion to oxirane of 90% were obtained at the optimum reaction conditions. The heterogeneous catalyst, AIER, was found to be reusable and exhibited a negligible loss in activity.     

Prediction of Mass Transfer Coefficients in a Packed Bed using Tamarind Nut Shell Activated Carbon to Remove Phenol

Phenol is a refractive pollutant that is generated from almost all the types of industries. Removal of phenol can be achieved economically by using a cost effective technique like adsorption on to activated carbon. The present paper reports on the preparation and characterization of activated carbon from tamarind nutshell, an agricultural waste byproduct, and its use in a packed bed for the removal of phenol. The breakthrough curves for column sorption of phenol from aqueous solutions to TNSAC have been measured at various flow rates and different particle sizes at 28 °C. The results obtained showed that the sorption of phenol is dependent on both the flow rate and the particle size of the adsorbent, and that the breakpoint time and phenol removal yield decrease with increasing flow rate and particle size. The overall mass transfer coefficient is calculated from the experimental data and compared with the values obtained from the correlation. Experimental values are in excellent agreement with the predicted values from the correlation.     

Noninvasive measurement of the pH of the endoplasmic reticulum at rest and during calcium release

The pH within individual organelles of the secretory pathway is believed to be an important determinant of their biosynthetic activity. However, little is known about the determinants and regulation of the pH in the secretory organelles, which cannot be readily accessed by [H+]-sensitive probes. We devised a procedure for the dynamic, noninvasive measurement of pH in the lumen of the endoplasmic reticulum in intact mammalian cells. A recombinant form of the B subunit of Shiga toxin, previously modified to include a carboxyl-terminal KDEL sequence and a pH-sensitive fluorophore, was used for a two-stage delivery strategy. Retrograde traffic of endogenous lipids was harnessed to target this protein to the Golgi complex, followed by retrieval to the endoplasmic reticulum (ER) by KDEL receptors. Immunofluorescence and immunoelectron microscopy were used to verify the subcellular localization of the modified B fragment. Fluorescence ratio imaging and two independent calibration procedures were applied to determine the pH of the ER in situ. We found that the pH of the endoplasmic reticulum is near neutral and is unaffected during agonist-induced release of calcium. The ER was found to be highly permeable to H+ (equivalents), so that the prevailing [H+] is susceptible to alterations in the cytosolic pH. Plasmalemmal acid-base transporters were shown to indirectly regulate the endoplasmic reticulum pH.     

Jitter reduction in self-sustaining monostable clock recovery circuit

A simple circuit modification is presented for reducing the output jitter of the self-sustaining monostable multivibrator clock recovery circuit. Jitter is reduced by preventing the monostable multivibrator from being triggered by pulses that arrive early. Experimental results in a fibre-optic system employing the Petrovic code show that, with this modification, the jitter variance can easily be reduced by a factor of 6.     

Effect of fibre content and alkali treatment on mechanical properties of Roystonea regia-reinforced epoxy partially biodegradable composites

The present paper investigates the effect of fibre content and alkali treatment on tensile, flexural and impact properties of unidirectional Roystonea regia natural-fibre-reinforced epoxy composites which are partially biodegradable. The reinforcement Roystonea regia (royal palm) fibre was collected from the foliage of locally available royal palm tree through the process of water retting and mechanical extraction. The poor adhesion between fibre and matrix is commonly encountered problem in natural-fibre-reinforced composites. To overcome this problem, specific physical and chemical treatments were suggested for surface modification of fibres by investigators. Alkali treatment is one of the simple and effective surface modification techniques which is widely used in natural fibre composites. In the present study both untreated and alkali-treated fibres were used as reinforcement in Roystonea regia epoxy composites and the tensile, flexural and impact properties were determined at different fibre contents. The alkali treatment found to be effective in improving the tensile and flexural properties while the impact strength decreased.     

Major histocompatibility complex class I presentation of exogenous soluble tumor antigen fused to the B-fragment of Shiga toxin

Targeting exogenous antigen into the MHC class I-restricted presentation pathway is a prerequisite for the induction of cytotoxic T lymphocytes (CTL) which have been shown to represent an important component of the protective and therapeutic immune response to viral infections and tumors. In this study, we produced recombinant proteins composed of the receptor-binding non-toxic B-fragment of bacterial Shiga toxin derived from Shigella dysenteriae associated with an epitope from a model tumor antigen, Mage 1. We show that Shiga B-Mage 1 fusion proteins carrying an active or inactive endoplasmic reticulum retrieval signal (the C-terminal peptides KDEL or KDELGL, respectively) could be presented by peripheral blood mononuclear cells in an MHC class I-restricted manner to Mage 1-specific CTL. After pulsing B lymphoblastoid cells or dendritic cells with Shiga B-Mage 1 fusion protein, activation of the MHC class I-restricted Mage 1-specific CTL was also demonstrated. In further analysis, we showed that treatment with brefeldin A or paraformaldehyde fixation of Epstein-Barr virus-transformed B cells prevented the presentation of the Mage 1 T cell epitope, which excluded extracellular processing of the antigen. Immunofluorescence analysis also revealed that the Shiga B-Mage 1 fusion protein was largely excluded from Lamp-2-positive lysosomal structures. Therefore, the ability of Shiga toxin B-fragment to target dendritic cells and B cells and to direct antigen into the exogenous class I-restricted pathway makes it an attractive non-living and non-toxic vaccine vector.