MAGNESIUM HYDROXIDE FILLED EVA: THE EFFECTS OF FILLER SURFACE MODIFICATION ON THE STRENGTH OF FILLER/MATRIX ADHESION AND THE CONSEQUENCES FOR COMPOSITE STRUCTURE AND PROPERTIES

The interaction of ammonium stearate (AS) and γ-aminopropyltriethoxysilane (APS) treatments with a magnesium hydroxide flame retardant filler and their effects on its use in an ethylene vinyl acetate copolymer compound have been investigated. The work has shown clear evidence of changes in the structure of the surface layers formed on the filler as the amount of additive is increased and the levels at which these occur can be correlated with theoretical monolayer quantities. Infrared (IR) spectroscopy data suggest that the stearate coating changes from a half salt to a full salt as the coating level is increased and that the APS coating on the filler initially has a significant bicarbonate content, presumably due to reaction with atmospheric carbon dioxide. The effect of coating level on the melt flow rate, insoluble matrix content, crystallisation behaviour, tensile properties, limiting oxygen index, and ageing of the filled compound has been studied. Distinct trends have been observed, many of which can be correlated with the structure of the filler surface layers. Of particular importance is the observation that, unlike APS, excess stearate appears to promote detrimental ageing effects.     

Indoor temperature changes in retrofit homes

The behavioral response (e.g. changes in indoor temperatures, attention to window and door openings) to residential technical efficiency improvements (e.g. attic insulation, storm windows) is an important and largely unresolved issue. Although there is considerable discussion concerning the extent to which households take back some of the energy savings due to technical efficiency improvements in increased comfort, there is almost no empirical evidence on the subject.Detailed electricity billing data (from mid-1981 to mid-1983) were analyzed for 79 households that received financial assistance from the Bonneville Power Administration to retrofit their homes in mid-1982. The mean retrofit expenditure in these homes was $1900; the mean reduction in annual electricity use was 4700 kWh, of which 83% was due to reductions in space heating electricity use. Analysis of the electricity billing data suggests that these households increased their indoor temperature settings after retrofit by almost 1 °F on average. This temperature increase led to an estimated average loss of almost 600 kWh of electricity saving. In other words, roughly 10% of the energy saving due to retrofit was taken back in terms of increased comfort. These results concerning changes in indoor temperatures should be viewed cautiously because of limitations in the analytical method and the large variation across households.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

The particle pressure of arrays in a potential flow

The role of the polarization of objects, for determining the forces acting on them in a surrounding potential flow, is developed. This is used to derive the particle pressure and compressibility for arrays, as well as expressions for the overall average stresses. The structure of the array, and the way in which it responds to a virtual strain, determines these stresses in contrast to earlier structure-independent models of Geurst (Physica 129A (1985) 233–261, Physica, 135A (1986) 455–486) and Wallis (Multiphase Sci. Technol. 5 (1989) 239–361, Int. J. Multiphase Flow 17 (6) (1991) 815–821). Specific results are given for rectangular arrays of spheres.     

Precision winding of fiber optic filament. II. Winding control

For pt.I see ibid., vol.39, no.3, p.258-67 (1992). The winding of fiber optic filament in the hoop, or precision, pattern is considered. Various automatic control options that have been designed and tested are described. The controllers are designed to regulate the fiber lag angle, which is the angle at which the feed filament approaches the take-up spool. Successful, flawless winding is directly related to accurate lag regulation. The contributions are distinguished by the fact that the automatic winding rate is 10 to 30 times greater than that achieved before by operator-assisted winding     

Heat transfers in treatment furnaces

For heat treating cylindrical metal billets, their lay-out in a furnace usually resembles that of an in-line heat-exchanger tube bank, with the air flows orthogonal to the billets. For maximum effectiveness of transferring thermal energy from the forced convecting air to the billets, the optimal horizontal pitch-to-diameter ratio for the billets should be 1·33 ± 0·05. For this same purpose it is advantageous to employ a vertical spacing (between the billets) as large as can be permitted for a given load of billets.     

Surface-mediated effects on porous polymer monolith formation within capillaries

The formation of a porous polymer monolith (PPM) is influenced by the physico-chemical properties of the wall surface of its container. This influence can have a dramatic effect on the resulting monolith morphology depending on the nature and composition of the wall. Indeed, a dense polymer layer or “sheath”, distinct from the bulk porous material, has been observed at the wall surface of capillaries, and thus a study was undertaken to explore the dependence of this layer on the hydrophobicity of the surface. A range of silanizing reagents were used to modify the surface of the fused silica capillary, including aminopropyl, trimethylsilyl, octadecyl and perfluorooctyl functionalities. Crosslinked butyl acrylate-based PPM was formed in the modified capillaries and extruded. SEM images of the monoliths were used to examine the sheath morphology and thickness, which are discussed with respect to surface hydrophobicity.     

Effect of stepper lens operating conditions on proximity effects in DUV optical lithography down to 250nm

Reduction of optical proximity effects (OPE), at deep uv wavelength of 248nm, caused by the variation of stepper lens operating conditions is investigated. It is shown that many of these effects, which increase as the Rayleigh limit is approached, can be minimised, and in many cases eliminated, by suitable choice of lens numerical aperture (NA) and partial coherence (sigma, σ).

Application of these results should enable the user of advanced wafer steppers to carry out high resolution lithography with a minimum of time consuming optical proximity correction (OPC).     

Application of infrared reflectance spectroscopy to the analysis of milk and dairy products

A method for the rapid, simultaneous determination of protein, fat, carbohydrate, non-protein nitrogen and total solids in milk and liquid dairy products by infrared reflectance spectroscopy is presented. The method is calibrated against known standards obtained by conventional, time-consuming wet chemical methods but, once calibrated, can be operated routinely by non-skilled personnel. The method is sensitive and accurate down to 0·5% w/v and can be applied to most liquid samples without any need for prior preparation.