Development of a Fish Cell Culture Model to Investigate the Impact of Fish Oil Replacement on Lipid Peroxidation

Fish oils are rich in omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFA), predominantly 20:5n-3 and 22:6n-3, whereas vegetable oils contain abundant C₁₈-PUFA, predominantly 18:3n-3 or 18:2n-6. We hypothesized that replacement of fish oils with vegetable oils would increase the oxidative stability of fish lipids. Here we have used the long established and easily cultivated FHM cell line derived from the freshwater fish species fathead minnow (Pimephales promelas) to test this hypothesis. The FHM cells were readily able to synthesize 20:5n-3 and 24:6n-3 from 18:3n-3 but 22:6n-3 synthesis was negligible. Also, they were readily able to synthesize 20:3n-6 from 18:2n-6 but 20:4n-6 synthesis was negligible. Mitochondrial β-oxidation was greatest for 18:3n-3 and 20:5n-3 and the rates for 16:0, 18:2n-6, 22:6n-3 and 18:1n-9 were significantly lower. Fatty acid incorporation was predominantly into phospholipids (79–97%) with very little incorporation into neutral lipids. Increasing the fatty acid concentration in the growth medium substantially increased the concentrations of 18:3n-3 and 18:2n-6 in the cell phospholipids but this was not the case for 20:5n-3 or 22:6n-3. When they were subjected to oxidative stress, the FHM cells supplemented with either 20:5n-3 or 22:6n-3 (as compared with 18:3n-3 or saturated fatty acids) exhibited significantly higher levels of thiobarbituric reactive substances (TBARS) indicating higher levels of lipid peroxidation. The results are discussed in relation to the effects of fatty acid unsaturation on the oxidative stability of cellular lipids and the implications for sustainable aquaculture.     

Graft copolymerization studies. III. Methyl methacrylate onto polypropylene and polyethylene terephthalate

The tert‐butoxy radical‐facilitated grafting of methyl methacrylate (MMA) onto commercial polypropylene (PP) pellets and fiber was investigated in heterogeneous conditions similar to practical systems. Free‐radical grafting of several other monomers onto PP fiber was also investigated. Also, preliminary data from the grafting of MMA onto poly(ethylene terephthalate) pellets is presented. The PP‐graft‐PMMA residues were detected by solid‐state ¹³C‐NMR and photoacoustic IR spectroscopy. There was a good correlation between the degree of grafting (DG) determined from these spectroscopic techniques and the results from gravimetric methods. A maximum grafting efficiency of over 50% was found, whereas DG (20%) remained constant at various PP pellet, initiator, and monomer concentrations. However, at relatively low PP fiber concentrations, the DG was 27%; the increase was most likely due to the greater surface area of the fiber. There was also a reduction in DG (14%) at relatively low initiator concentrations. The reaction conditions were altered to favor grafting by the addition of more polymer substrate. When the ratio of tert‐butoxy radicals to PP was decreased, more of the substrate remained unmodified, and empirical calculations showed the formation of grafts with up to 40 monomer units. At high initiator concentrations, calculations showed that the graft residues were 1–2 units long. Therefore, variation of the polymer, initiator, and monomer concentrations was shown to have a significant effect on grafting. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 898–915, 2002     

Epoxidation of soybean oil by the methyltrioxorhenium-CH2Cl2/H2O2 catalytic biphasic system

We studied the methyltrioxorhenium (MTO)-CH₂Cl₂/H₂O₂ biphasic system for epoxidizing soybean oil. The reactions were optimized (reactant ratio, time, and temperature), which resulted in a better performance (higher conversion and selectivity) than those described in the literature. Total doublebond conversion and 95% selectivity were obtained in 2 h at room temperature. Furthermore, it was possible to reach desired epoxidation degrees by changing the oxidant and MTO amounts. The rhenium-epoxidized soybean oil remained stable in the absence of stabilizers for up to 30 d when stored at mild conditions.     

Effect of Silicon Substitution on the Sintering and Microstructure of Hydroxyapatite

The substitution of between 0 and 1.6 wt% silicon (Si-HA) in hydroxyapatite (HA) inhibited densification at low temperatures (1000°–1150°C), with these effects being more significant as the level of silicon substitution was increased. For higher sintering temperatures (1200°–1300°C), the sintered densities of HA and Si-HA compositions were comparable. Examination of the ceramic microstructures by scanning electron microscopy (SEM) showed that silicon substitution also inhibited grain growth at higher sintering temperatures (1200°–1300°C). The negative effect of silicon substitution on the sintering of HA at low temperatures (1000°–1150°C) was reflected in the hardness values of the ceramics. However, for higher sintering temperatures, e.g., 1300°C, where sintered densities were comparable, the hardness values of Si-HA compositions were equal to or greater than that of HA, reflecting the smaller grain sizes observed for the former.     

Kinetic model for crosslinking free radical polymerization including diffusion limitations

A kinetic model for crosslinking free radical polymerization is derived to predict the effect of temperature, inhibitor concentration, and initiator concentration on the rate of cure. The model is based on evidence from the literature that termination and comonomer reactivity differences can be ignored in many crosslinking free radical systems. Because of the complexity of the crosslinking chemistry, empirical relationships are used for decreasing initiator efficiency and radical mobility during cure. A sequential parameter fitting procedure is devised for isothermal curing data, and predictions are affirmed with both divinyl benzene and vinyl ester resin at several temperatures and concentrations of initiator and inhibitor. The key advantages of this kinetic model over previous models are its accuracy at high conversions and its ability to predict the effect of inhibitor and initiator concentrations on the rate of cure. This model is readily applicable to process modeling in the polymer composites manufacturing industry, which largely uses unsaturated polyester and vinyl ester resin matrices.     

Ahiflower oil: A novel non‐GM plant‐based omega‐3+6 source

Ahiflower oil, a novel and proprietary dietary oil with the richest effective combined essential fatty acids from a single non‐GM plant, has been developed agronomically in a unique vertically integrated “soil to oil” model at commercial scale by Nature's Crops International. Ahiflower oil helps resolve a persistent dilemma in sustainable global omega‐3 nutrition from marine sources while dramatically improving dietary omega‐3 EPA conversion from plant sources and while supplying beneficial anti‐inflammatory GLA not found in fish or algal oils. Having achieved key regulatory clearances in the US and EU, Ahiflower oil is launching in the latter half of 2015 in supplements and foods.     

The influence of gas velocity, salt type and concentration on transition concentration for bubble coalescence inhibition and gas holdup

The influence of gas velocity (3.5, 10, and 18 mm/s), salt type (NaCl, NaF, NaBr, NaI and CsCl) and salt concentration (0.001-3 M) on bubble coalescence in a small bubble column were studied. The bubble coalescence was determined by the relative change in the measured light intensities passing through the salt solutions and clean deionised water. It was shown that the transition salt concentration for bubble coalescence inhibition (determined at 50% of bubble coalescence) of all investigated salts decreases with increasing superficial gas velocity. The difference in the transition concentration between NaCl, NaF, NaBr and CsCl does not significantly change with the gas velocity. However that difference between NaI and the other salts significantly decreases with increasing the gas velocity. The gas holdup significantly increases with NaCl, NaF, NaBr and CsCl concentrations but does not significantly change with NaI concentration. These new results imply that the transition salt concentration for bubble coalescence and gas holdup depend not only on the salt properties (i.e. the ion type and their combination) as previously reported, but also on the hydrodynamic conditions.     

Thermal and nonthermal physiochemical processes in nanoscale films of amorphous solid water

Amorphous solid water (ASW) is a disordered version of ice created by vapor deposition onto a cold substrate (typically less than 130 K). It has a higher free energy than the crystalline phase of ice, and when heated above its glass transition temperature, it transforms into a metastable supercooled liquid. This unusual form of water exists on earth only in laboratories, after preparation with highly specialized equipment. It is thus fair to ask why there is any interest in studying such an esoteric material. Much of the scientific interest results from the ability to use ASW as a model system for exploring the physical and reactive properties of liquid water and aqueous solutions. ASW is also thought to be the predominant form of water in the extremely cold temperatures of many interstellar and planetary environments. In addition, ASW is a convenient model system for studying the stability of amorphous and glassy materials as well as the properties of highly porous materials. A fundamental understanding of such properties is invaluable in a diverse range of applications, including cryobiology, food science, pharmaceuticals, astrophysics, and nuclear waste storage, among others. Over the past 15 years, we have used molecular beams and surface science techniques to probe the thermal and nonthermal properties of nanoscale films of ASW. In this Account, we present a survey of our research on the properties of ASW using this approach. We use molecular beams to precisely control the deposition conditions (flux, incident energy, and incident angle) and create compositionally tailored, nanoscale films of ASW at low temperatures. To study the transport properties (viscosity and diffusivity), we heat the amorphous films above their glass transition temperature, T(g), at which they transform into deeply supercooled liquids prior to crystallization. The advantage of this approach is that at temperatures near T(g), the viscosity is approximately 15 orders of magnitude larger than that of a normal liquid. As a result, the crystallization kinetics are dramatically slowed, increasing the time available for experiments. For example, near T(g), a water molecule moves less than the distance of a single molecule on a typical laboratory time scale (～1000 s). For this reason, nanoscale films help to probe the behavior and reactions of supercooled liquids at these low temperatures. ASW films can also be used for investigating the nonthermal reactions relevant to radiolysis.     

Current wrought magnesium alloys: Strengths and weaknesses

The opportunities for extruded and sheet magnesium products in the automotive industry, in particular, are increasing as the quest for lightweighting gains momentum. However, the current alloys all have limitations and these are accentuated when higher productivity targets are also imposed. This article attempts to summarize the strengths and weaknesses of the current wrought alloys, with particular emphasis on the extrusion process, and also considers alternative processing routes which may be useful in overcoming some of these shortcomings. For more information, contact Colleen Bettles, CMIT Private Bag 33, Clayton South MDC, Clayton Victoria 3169, Australia; +61-3-95452936; fax +61-3-95441128; e-mail Colleen.Bettles@csiro.au.     

Aqueous Ozonation Of Fatty Acids

The reactivity of a series of fatty acids toward ozone was examined in aqueous solution at low substrate concentration (μg.L^?1 range). Saturated fatty acids were unreactive, unsaturated fatty acids were readily consumed. A number of reaction products or their methylated derivatives were identified by gas chromatography and gas chromatography-mass spectrometry. The products identified are consistent with a 1,3-dipolar cyclo-addotion reaction.