Speed and safety effect of photo radar enforcement on a highway corridor in British Columbia

This study evaluates the effect of the photo radar program on traffic speed and collisions at photo radar (PRP) influence locations (PRP location) and interleaving non-PRP locations on the Vancouver Island portion of Highway 17 (Pat Bay Highway) in British Columbia (BC). Simple before-after comparison was used to summarize the speed effect while observational before- after method was employed to estimate the safety effect. To control for regression to the mean and time effect, Empirical Bayes (EB) method with comparison groups was employed in collision analysis. The study found a 2.8-km/h reduction in mean speed and a 0.5-km/h reduction in speed standard deviation at a monitoring site 2 km south of the treatment area. Corresponding to speed reduction. the study revealed a 14%+/-11% reduction in expected collisions at the PRP locations, a 19%+/-10% reduction at the non-PRP locations, and a 16%+/-7% reduction along the study corridor as a whole. No evidence was found for a localized effect in a 2-km range of the photo radar direct influence area, over and above those at the interleaving non-PRP locations. The results support the hypothesis of a distance spillover effect--that the program not only improved safety at the PRP locations, but along the entire enforcement corridor as well. It suggests that the unpredictable nature of the deployments lead drivers to modify their behavior along the length of the corridor because they could not discern 'safe' from 'unsafe' segments.     

Measurements of chemical warfare agent degradation products using an electrophoresis microchip with contactless conductivity detector

This paper reports on a microfluidic device for the screening of organophosphonate nerve agent degradation products. The miniaturized system relies on an efficient chip-based separation of alkyl methylphosphonic acids (breakdown products of Sarin, Soman, and VX nerve agents) followed by their sensitive contactless conductivity detection. Experimental parameters relevant to the separation and detection processes have been optimized to yield high sensitivity (with 48-86 microg L(-1) detection limits), fast response (50 s for a three alkyl methylphosphonic acid mixture), high precision (RSD = 3.8-5.0%), and good linearity (over the 0.3-100 mg L(-1) range). Applicability to natural (river) water samples is demonstrated. The new microsystem offers promise for monitoring degradation products of chemical warfare agents, with advantages of speed/warning, efficiency, portability, sample size, and cost compared to conventional ion chromatography or capillary electrophoresis systems.     

Linking learning goals and educational resources through interactive concept map visualizations

Concept browsing interfaces can help educators and learners to locate and use learning resources that are aligned with recognized learning goals. The Strand Map Service enables users to navigate interactive visualizations of related learning goals and to request digital library resources aligned with learning goals. These interfaces are created using a programmatic Web service interface that dynamically generates interactive visual components. Preliminary findings suggest that these library interfaces appear to help users stay focused on the scientific content of their information discovery task, as opposed to focusing on the mechanics of searching.     

A lower bound for computing Oja depth

Let S={s₁,…,sn} be a set of points in the plane. The Oja depth of a query point θ with respect to S is the sum of the areas of all triangles (θ,si,sj). This depth may be computed in O(nlogn) time in the RAM model of computation. We show that a matching lower bound holds in the algebraic decision tree model. This bound also applies to the computation of the Oja gradient, the Oja sign test, and to the problem of computing the sum of pairwise distances among points on a line.     

The 802.11n MIMO-OFDM Standard for Wireless LAN and Beyond

An overview is given of the new IEEE 802.11n standard. This is the first wireless LAN standard based on MIMO-OFDM, a technique pioneered by Airgo Networks to give a significant performance increase in both range and rate relative to conventional wireless LAN. Performance results show that net user throughputs over 100 Mbps are achievable, which is about four times larger than the maximum achievable throughput using IEEE 802.11a/g. For the same throughput, MIMO-OFDM achieves a range that is about 3 times larger than non-MIMO systems. This significant improvement in range-rate performance makes MIMO-OFDM the ideal solution not only for wireless LAN, but also for home entertainment networks and 4G networks. Richard van Nee received the M.Sc. degree in Electrical Engineering from Twente University in Enschede, the Netherlands, in 1990. In May 1995, he received the PhD degree from Delft University of Technology. From 1995 to 2000, he worked for Lucent Technologies Bell Labs on wireless LAN transmission techniques. He was one of the original proposers of the CCK and OFDM modulation techniques which were adopted by the IEEE 802.11b and IEEE802.11a wireless LAN standards. In 2001, he cofounded Airgo Networks that developed the first MIMO-OFDM modem for wireless LAN and which techniques form the basis of the IEEE 802.11n standard. Together with Ramjee Prasad, he wrote a book on OFDM, entitled ‘OFDM for Mobile Multimedia Communications.’ In 2002 he received the Dutch Veder award for his contributions to standardization of wireless communications.     

探讨降低电磁干扰之道

电磁干扰是电子设备和系统设计当中不能回避的问题.电源是把电子设备和电源网络联系起来的部分,因此电源引起的电磁干扰值得认真关注.随着开关稳压器的广泛使用,它越来越多地存在于电子设备中.目前,减轻电磁干扰的方法很多,包括接地、屏蔽和滤波等方式,本文将着重介绍用多相同步和扩展频谱频率调制(SSFM)的方式来降低电磁干扰.     

Effect of AlN and Al2O3 additions on the phase relationships and morphology of SiC Part I Compositions and properties

X-ray diffraction was utilized to follow the transformation from -SiC (3C) to the various -SiC polytypes in the presence of AlN and Al₂O₃ additives after hot pressing from 1700 to 2100°C. The 2H- and 6H-polytypes of -SiC were the predominate polytypes with additions of only AlN or Al₂O₃, respectively. The amount of 2H- and 6H-polytypes, and subsequently the microstructural morphology of the SiC materials, were found to be controlled by varying the amount of AlN and Al₂O₃. Improvements in fracture toughness to 9 MPa-m were achieved with flexural strengths ranging from 600 to 900 MPa. These results suggest that accurate control of the polytypic make-up of SiC-based materials, along with their mechanical properties, can be achieved through AlN and Al₂O₃ additions.     

High power, 8.5 W CW, visible laser diodes

Visible laser diodes have been fabricated from AlGaInP operating at approximately 680 nm to high output powers. Broad area lasers with 100 mu m wide emitting apertures operate to greater than 1 W CW with a different efficiency of 38%. The threshold current densities of the material have been measured to be as low as 350 A/cm/sup 2/ for lasers with 30% mirror reflectivities. Monolithic bars 8 mm long with 50 mu m emitting apertures periodically spaced on 500 mu m centres have been fabricated which operate to 8.5 W CW.<>