An Efficient Semi-Analytical Simulation for the Heston Model

With splitting technique, a new semi-analytical scheme with predictable strong convergence order 1.0 is proposed for the transformed Heston model, where the variance process is displaced by the corresponding volatility process. The volatility process is decomposed into a linear SDE and an ODE, both of which have the analytical solution, but the SDE is simulated by the Euler method while the ODE is approximated analytically with a slight modification. Numerical tests show its high efficiency and accuracy in the simulation for the mean-reverting square root process.     

金属皂类热稳定剂对RPVC流变性能的影响

采用Brabender转矩流变仪，分析并探讨了硬酯酸钡（BaSt2）、硬酯酸铅（PbSt2）、硬酯酸钙（CaSt2）、硬酯酸锌（ZnSt2）4种硬酯酸金属皂类热稳定剂以及复配BaSt2／PbSt2热稳定剂对硬质聚氯乙烯（RPVC）流变性能的影响。结果表明，BaSt2，CaSt2能够促进RPVC的塑化，而PbSt2和ZnSt2却推迟RPVC的塑化；在复配BaSt2／PbSt2稳定剂体系中，随着BaSt2比例的增大，塑化时间缩短，但BaSt2与PbSt2按分子数1：1比率时，RPVC熔体粘度增幅较大。     

丙烯酸酯乳液的改性研究

制备了丙烯酸酯乳液,探讨了丙烯酸、N-羟甲基丙烯酰胺、二乙烯基苯、丙烯腈和三聚氰胺等不同改性剂对乳液性能的影响,在此基础上通过互穿网络聚合、化学共聚及物理共混等方法对乳液的性能进行了改性研究。     

低挥发分煤在新型干法窑生产中的应用

对劣质煤、低挥发分煤的燃烧特性分析,工艺设备分析,提出预分解窑烧劣质煤、低挥发分煤的可能性、必要性,为我公司烧劣质煤、无烟煤打下了基础。     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002     

有机硅高沸物制备β-SiC粉体的初步研究

以有机硅高沸物为原料高温热解制备β—SiC粉体。实验证明：有机硅高沸物在1450℃下晶化2h，可以得到晶型较好的β—SiC，用Pt和FeSO4作为复合催化剂可有效提高有机硅高沸物的陶瓷转化率。     

Image super-resolution based on multi-space sparse representation

Sparse representation provides a new method of generating a super-resolution image from a single low resolution input image. An over-complete base for sparse representation is an essential part of such methods. However, discovering the over-complete base with efficient representation from a large amount of image patches is a difficult problem. In this paper, we propose a super-resolution construction based on multi-space sparse representation to efficiently solve the problem. In the representation, image patches are decomposed into a structure component and a texture component represented by the over-complete bases of their own spaces so that their high-level features can be captured by the bases. In the implementation, a prior knowledge about low resolution images generation is combined to the typical base construction for high construction quality. Experiment results demonstrate that the proposed method significantly improves the PSNR, SSIM and visual quality of reconstructed high-resolution image.     

改性凹凸棒土净化含铬废水的研究

将凹凸棒土进行改性处理，用于对含铬废水中铬离子的吸附。本文研究了改性方式、凹凸棒土用量、吸附时间、pH值对含铬废水中铬离子净化率的影响。     

废弃木粉与短切玻璃纤维组合增强聚丙烯的力学性能

用废弃木粉与短切玻璃纤维作为增强材料，制得了组合增强的聚丙烯复合材料，研究了制备工艺及设备、材料配方及界面改性方法等对材料力学性能的影响。结果表明，用单螺杆挤出机制备组合增强材料，可减少对玻璃纤维的损伤，保持较长的玻璃纤维，有利于其增强作用的发挥；随着玻璃纤维含量的增加，体系的力学性能提高，而木粉含量对材料力学性能的影响与玻璃纤维的含量相关；采用硅烷偶联剂对木粉进行表面处理，在基体中添加接枝极性基团的改性聚丙烯，可改善体系的界面结合，提高力学性能。     

Synthesis and properties of an alkoxysilane dye containing three electronic donor groups for nonlinear optical applications

In order to obtain an efficient hybrid inorganic–organic nonlinear optical (NLO) materials, an azo-dye containing three electronic donor groups 2,5-dimethyl-4-(4′-nitrophenylazo)phenol (DMNPAP) was synthesized and reacted with 3-isocyanatopropyl triethoxysilane (ICTES) to give an alkoxysilane dye (ICTES–DMNPAP). Molecular structural characterizations for DMNPAP and ICTES–DMNPAP were investigated by elemental analysis, ¹H NMR, FTIR, UV–visible spectra and differential scanning calorimetry (DSC). The alkoxysilane dye could be hydrolyzed and polymerized in the presence of water, and then transparent hybrid films could be fabricated by spin coating on the indium–tin-oxide (ITO) glass substrates. Compared with the dye 4-nitro-4′-hydroxy-azobenzene (NHA) containing only one hydroxyl as donor group, DMNPAP exhibited larger β_CTμ_g value measured by solvatochromic method, and second harmonic generation (SHG) measurement of the hybrid films was in agreement with the result.