针织物平幅整理

随着服装加工不断变化的时尚要求及消费者质量意识的提高，Benninger公司设计制造了一系列满足其需求的针织物平幅加工设备，不但可提高质量，而且弱化或者消除了加工缺陷。到目前为止，Benninger公司提供了四种平幅加工工艺设备：平幅洗涤设备、平幅漂白设备、平幅丝光设备、平幅冷轧卷染色设备。     

Analytical solution of amperometric enzymatic reactions based on Homotopy perturbation method

Electrochemical polymerization is a simple and direct technique often employed for immobilizing redox enzymes at an electrode surface. Besides these, it allows precise control over the amount, spatial distribution and orientation of the enzymes. Analytical expressions pertaining to the immobilization of enzyme by electrochemical polymerization on the electrode surface were obtained by Homotopy perturbation method (HPM). This expression further distinguishes the product of the enzyme reaction at the electrode surface from those occurring alongside the polymer employed for immobilization. These analytical results are compared with the available limiting case results and they are found to be in good agreement.     

Nonlinear analysis of a thin pre-twisted and delaminated anisotropic strip

The present work is aimed at the development of an efficient mathematical model to assess the degradation in the stiffness properties of an anisotropic strip due to delamination. In particular, the motive is to capture those nonlinear effects in a strip that arise due to the geometry of the structure, in the presence of delamination. The variational asymptotic method (VAM) is used as a mathematical tool to simplify the original 3D problem to a 1D problem. Further simplification is achieved by modeling the delaminated structure by a sublaminate approach. By VAM, a 2D nonlinear sectional analysis is carried out to determine compact expression for the stiffness terms. The stiffness terms, both linear and nonlinear, are derived as functions of delamination length and location in closed form. In general, the results from the analysis include fully coupled nonlinear 1D stiffness coefficients, 3D strain field, 3D stress field, and in-plane and warping fields. In this work, the utility of the model is demonstrated for a static case, and its capability to capture the trapeze effect in the presence of delamination is investigated and compared with results available in the literature.     

Microstructural,physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation

The microstructural, physical, chemical and mechanical properties of Sansevieria cylindrica fibres are described for the first time in this work. A microstructural analysis of S. cylindrica leaves showed the presence of structural fibres and arch fibres. Polarised light microscopy and scanning electron microscopy of these fibres revealed a hierarchical cell structure that consisted of a primary wall, a secondary wall, a fibre lumen and middle lamellae. The cross-sectional area and porosity fraction of the fibre were estimated to be approximately 0.0245 mm² and 37%, respectively. The fibre density and fineness were approximately 0.915 ± 0.005 g/cm³ and 9 Tex, respectively. An X-ray diffraction and Fourier transform infrared analysis of the fibres showed the presence of cellulose I_β with a crystallinity index of 60%. Tensile tests showed that the corrected Young’s modulus was approximately 7 GPa, the tensile strength was 658 MPa, and the total elongation was between 10% and 12%.     

Brain segmentation in magnetic resonance human head scans using multi-seeded region growing

This paper presents a skull stripping method to segment the brain from MRI human head scans using multi-seeded region growing technique. The proposed method has two stages. In Stage-1, the brain in the middle slice is segmented, the brains in the remaining slices are segmented in Stage-2. In each stage, the proposed method is required to identify the rough brain mask. The fine brain region in the rough brain mask is segmented using multi-seeded region growing approach. The proposed method uses multiple seed points which are selected automatically based on the intensity profile of grey matter (GM), white matter (WM) and cerebrospinal fluid (CSF) of the brain image. The proposed brain segmentation method using multi-seeded region growing (BSMRG) was validated using 100 volumes of T1, T2 and PD-weighted MR brain images obtained from Internet Brain Segmentation Repository (IBSR), LONI and Whole Brain Atlas (WBA). The best Dice (D) value of 0·971 and Jaccard (J) value of 0·944 were recorded by the proposed BSMRG method on IBSR dataset. For LONI dataset, the best values of D?=?0·979 and J?=?0·960 were obtained for the sagittal oriented images by the proposed method. The performance consistency of the proposed method was tested on the brain images of all types and orientation and have and produced better and stable results than the existing methods Brain Extraction Tool (BET), Brain Surface Extraction (BSE), Watershed Algorithm (WAT), Hybrid Watershed Algorithm (HWA) and Skull Stripping using Graph Cuts (GCUT).     

Photocatalytic production of hydrogen from electrodeposited film and sacrificial electron donors

A new approach to combining a p-type semiconductor photocathode with sacrificial electron donors in the anode compartment in a two-compartment cell is described for photocatalytic hydrogen production. This approach is demonstrated for electrodeposited p-Cu₂O film supported on a transparent conducting oxide substrate. The oxide semiconductor surface was photochemically modified in situ with an ultra-thin Ni layer prior to use. A variety of organic and organometallic electron donors was screened by cyclic voltammetry, and the optimal candidate was hydroquinone at pH 10. Importantly, no photocurrents were measured at zero bias voltage in the two-compartment cell in the absence of an electron donor, signaling that water photosplitting is not feasible with p-Cu₂O. Methyl viologen (MV²⁺) was effective as an electron relay in the photocathode chamber as shown by in situ spectroscopic monitoring of the MV⁺ radical cations. Finally, practical perspectives of this new approach and value-added options for combining it with pollutant destruction are described.     

Cleavage efficiency of the novel aspartic protease yapsin 1 (Yap3p) enhanced for substrates with arginine residues flanking the P1 site: correlation with electronegative active-site pockets predicted by molecular modeling

Yapsin 1, a novel aspartic protease with unique specificity for basic residues, was shown to cleave CCK13-33 at Lys23. Molecular modeling of yapsin 1 identified the active-site cleft to have negative residues close to or within the S6, S3, S2, S1, S1', S2', and S3' pockets and is more electronegative than rhizopuspepsin or endothiapepsin. In particular, the S2' subsite has three negative charges in and close to this pocket that can provide strong electrostatic interactions with a basic residue. The model, therefore, predicts that substrates with a basic residue in the P1 position would be favored with additional basic residues binding to the other electronegative pockets. A deletion of six residues close to the S1 pocket in yapsin 1, relative to rhizopuspepsin and other aspartic proteases of known 3D structure, is likely to affect its specificity. The model was tested using CCK13-33 analogues. We report that yapsin 1 preferentially cleaves a CCK13-33 substrate with a basic residue in the P1 position since the substrates with Ala in P1 were not cleaved. Furthermore, the cleavage efficiency of yapsin 1 was enhanced for CCK13-33 analogues with arginine residues flanking the P1 position. An alanine residue, substituting for the arginine residue in the P6 position in CCK13-33, resulted in a 50% reduction in the cleavage efficiency. Substitution with arginine residues downstream of the cleavage site at the P2', P3', or P6' position increased the cleavage efficiency by 21-, 3- and 7-fold, respectively. Substitution of Lys23 in CCK13-33 with arginine resulted not only in cleavage after the substituted arginine residue, but also forced a cleavage after Met25, suggesting that an arginine residue in the S2' pocket is so favorable that it can affect the primary specificity of yapsin 1. These results are consistent with the predictions from the molecular model of yapsin 1.     

The psychosocial effects of landmines in Cambodia

The widespread use of landmines in conflict situations around the world and their continuing legacy for the civilian population in injuries, amputations, disabilities and economic costs has been recognized as a major problem. However, the psychosocial consequences for landmine victims are still to be realized. Although there are some facilities for the medical, orthopaedic and long-term rehabilitative care of landmine victims, hardly any exist for their psychosocial needs. This study considers the mental costs in terms of post-traumatic stress disorder, depression and anxiety. Individual difficulty in relationships and daily functioning is considerable, and the landmine victim faces social stigmatization, rejection and unemployment. Suggestions are made for brief training in relatively simple mental health care for staff working in already functioning programmes.     

Controllability of nonlinear systems consisting of a bilinear mode with distributed delays in control

Sufficient conditions for global relative controllability, of nonlinear systems consisting of a bilinear mode with distributed delays in control are given. Results for bilinear systems with multiple delays and general nonlinear systems with distributed delays in control are stated. Proofs are based on Schauder's fixed point theorem.