Direct Measurement of Energy Barriers on Rough and Heterogeneous Solid Surfaces

The “three-liquid” contact angle approach to the surface free energy components of solids was applied to poly (vinyl fluoride), rough and flattened, with and without flame treatment. Lifshitz-van der Waals (LW), γ ^LW _SL , and acid-base (AB), γ ^LW _SL , components were determined and used to calculate ?δG _SL (W ^adhesion _SL ) for the formation of interfaces of five liquids with polymer. The automated goniometer allowed the determination of the energy barriers, ?δ G? _SL as the advancing liquid moved from pinned configuration to a metastable one. The acid-base component of the barriers was much greater than the LW, and the magnitude of the barriers was only slightly reduced by flattening.     

髋关节整体替代陶瓷材料

许多材料在医学领域应用广泛,例如,整体替换硬组织或软组织的元件(如骨盆、骨头、关节、植牙等)、修补、诊断或矫正仪器(如起搏器、心脏阀等)。这些材料不仅要有好的力学性能,还要保持长期稳定,不能与人体相排斥。由于陶瓷材料在生理环境中具有强度高、生物相容性强和稳定性好的优点,人们研究用陶瓷材料替换骨骼。从20 世纪70 年代起,欧洲人用陶瓷组件置换整个髋关节。这些组件主要由氧化铝和氧化锆单体制成。然而,在有水环境中,氧化锆会发生低温降解。目前人们的研究重点在于提高陶瓷组件的强度和耐磨性,同时缩小其尺寸并延长其使用寿命。研究中使用的材料是氧化锆增韧的氧化铝复合陶瓷和其它氧化铝复合陶瓷,不再是单体陶瓷。另外,还可以使用氧化铝和氧化锆功能梯度复合材料。该梯度材料可以利用电泳沉积法(EPD)制得,其表面为纯氧化铝,中心部分为均匀的氧化铝、氧化锆复合材料,中间过渡部分是呈连续梯度渐变的氧化铝、氧化锆复合材料,烧成后会产生剩余热应力。设计这样的梯度结构是为了使复合材料具有最大表面压应力和最小内部张应力,与纯氧化铝组件相比,提高了强度和耐磨性。     

Modélisation Mathématique de la Décantation de la Boue Rouge

A good performance of the solid‐liquid unit operation is required for the economical exploitation of the Bayer process. A computational fluid dynamics (CFD) model simulating the operation of the last washing stage mud thickener of a large Canadian alumina plant is presented. The parametric study of the impact of changes in four parameters shows that the diameter of flocculated red mud particles, the feed flow rate and the radius of the feed well are critical parameters for the operation of the thickener.     

Kinetics of Multi‐Step Redox Processes by Time‐Resolved In Situ X‐ray Diffraction

The kinetics of redox reactions of iron oxide in oxygen carrier 50Fe₂O₃/MgAl₂O₄ are examined using different time‐resolved techniques. Reduction kinetics are studied by H₂ temperature‐programmed reduction (H₂‐TPR) monitored by time‐resolved in situ XRD. In contrast to conventional TPR, in situ XRD distinguishes the three‐stage reduction of Fe₂O₃ → Fe₃O₄ → FeO → Fe. It also shows that the oxidation of Fe → Fe₃O₄ by CO₂ has no intermediate crystalline phases, explaining why its kinetics can easily be investigated by conventional CO₂ temperature‐programmed oxidation (CO₂‐TPO). A shrinking core model which takes into account solid state diffusion allows describing the experimental data.     

Severity of delayed (“secondary”) cerebral energy failure after acute hypoxia-ischemia is related to the time integral of acute ATP depletion

The aim of this study was to reproduce the delayed (secondary) cerebral energy failure previously described in birth-asphyxiated newborn infants and to investigate relationships between primary insult severity and the extent of the delayed energy failure. Phosphorus (³¹P) magnetic resonance spectroscopy (MRS) at 7 T was used to study the brains of 12 newborn piglets during an acute, reversible, cerebral hypoxic-ischemic episode which continued until nucleotide triphosphates (NTP) were depleted. After reperfusion and reoxygenation, spectroscopy was continued for 48 h. High-energy metabolite concentrations returned to near normal levels after the insult, but later they fell as delayed energy failure developed. The time integral of NTP depletion in the primary insult correlated strongly with the minimum [phosphocreatine (PCr)]/[inorganic orthophosphate (P_i)] observed 24–48 h after the insult. (Linear regression analysis gave slope –8.04 h^–1; ordinate intercept=1.23;r=0.92;P<0.0001.) This model is currently being used to investigate the therapeutic potential of various cerebroprotective strategies including hypothermia.     

Combined extraction processes of lipid from Chlorella vulgaris microalgae: microwave prior to supercritical carbon dioxide extraction

Extraction yields and fatty acid profiles from freeze-dried Chlorella vulgaris by microwave pretreatment followed by supercritical carbon dioxide (MW-SCCO(2)) extraction were compared with those obtained by supercritical carbon dioxide extraction alone (SCCO(2)). Work performed with pressure range of 20-28 Mpa and temperature interval of 40-70 °C, gave the highest extraction yield (w/w dry weight) at 28 MPa/40 °C. MW-SCCO(2) allowed to obtain the highest extraction yield (4.73%) compared to SCCO(2) extraction alone (1.81%). Qualitative and quantitative analyses of microalgae oil showed that palmitic, oleic, linoleic and α-linolenic acid were the most abundant identified fatty acids. Oils obtained by MW-SCCO(2) extraction had the highest concentrations of fatty acids compared to SCCO(2) extraction without pretreatment. Native form, and microwave pretreated and untreated microalgae were observed by scanning electronic microscopy (SEM). SEM micrographs of pretreated microalgae present tearing wall agglomerates. After SCCO(2), microwave pretreated microalgae presented several micro cracks; while native form microalgae wall was slightly damaged.     

Plasma-Assisted Diesel Oxidation Catalyst on Bench Scale: Focus on Light-off Temperature and NOx Behavior

The effect of a non-thermal plasma reactor over a commercial Diesel oxidation catalyst (DOC) was investigated. Studies have been focused on the gas treatment efficiency together with lowering light-off temperature when a DOC catalyst was connected downstream to plasma reactor in test bench scale. Experiments have been conducted using multi-DBDs (dielectric barrier discharge) reactor in planar configuration driven by a HV AC generator (11 kV–15 kHz). The specific input energy was set to 57 and 85 J/L. Experiments were performed in gas composition simulating Diesel exhaust. Commercial DOC, monolith-supported Pt–Pd/Al₂O₃, was used at gas hourly space velocities of about 55,000 and 82,000 h^?1. CO and hydrocarbons light-off curves were determined for DOC, plasma, and plasma-DOC systems by temperature programmed surface reaction from 80 to 400 °C. Particular attention has been paid to the gas temperature between the plasma reactor and the DOC. Results show that the plasma-catalyst system provides the lowest light-off temperatures for CO and HCs. Under conditions of this study, light-off temperature improvement by about 57 °C was obtained and the plasma reactor totally oxidized NO to NO₂ at low temperature.     

Oxidative catabolism of α-tocopherol in rat liver microsomes

The goal of this study was to clarify the mechanism responsible for the catabolism of α-tocopherol. The vitamin, bound to albumin, was incubated with rat liver microsomes and appeared to be broken down. Optimal production of the metabolite was obtained when 1 mg of microsomal protein was incubated with 36 μM of α-tocopherol in the presence of 1.5 mM of NADPH. Chromatographic and mass spectrometric analyses of the metabolite led to the conclusion that it consists of an ω-acid with an opened chroman ring, although we could not perform nuclear magnetic resonance analysis to confirm this. Our data show that α-tocopherol is ω-oxidized to a carboxylic acid and that this process can occur in rat liver microsomes in the presence of NADPH and O₂. The oxidation to the quinone structure appears to be a subsequent event that may be artifactual and/or catalyzed by a microsomal enzyme(s).     

Graded evolution of anisotropic microstructure during sintering from crystal-oriented powder compact

Anisotropic sintering, including shrinkage and grain growth, was examined for c-axis-oriented (Sr,Ca)₂NaNb₅O₁₅ (SCNN) ceramics, which were prepared by colloidal processing under a magnetic field. In the c-axis-oriented SCNN powder compact, shrinkage and grain growth along the c-axis were higher than those along the a-axis. The anisotropic microstructural development was clearly associated with anisotropic sintering shrinkage. X-ray diffraction, scanning electron microscopy, and energy back scattering diffraction showed that the grain growth of oriented particles by including random grains contribute to the development of the oriented microstructure. Finally, the highly crystal-oriented SCNN ceramics with a densified microstructure were obtained through anisotropic sintering. These results clearly showed the potential to develop a well-defined anisotropic microstructure during sintering by designing and controlling the particle packing structure in a powder compact.