Sidestream tobacco smoke exposure acutely alters human nasal mucociliary clearance

Nasal mucociliary clearance (NMC) is a biomarker of nasal mucosal function. Tobacco smokers have been shown to have abnormal NMC, but the acute effect of environmental tobacco smoke (ETS) on nonsmokers is unknown. This study evaluated acute tobacco smoke-induced alterations in NMC in 12 healthy adults. Subjects were studied on 2 days, separated by at least 1 week. Subjects underwent a 60-min controlled exposure at rest to air or sidestream tobacco smoke (SS) (15 ppm CO) in a controlled environmental chamber. One hour after the exposure, 99mTc-sulfur colloid was aerosolized throughout the nasal passage and counts were measured with a scintillation detector. Six out of 12 subjects showed more rapid clearance after smoke exposure than after air exposure, and 3/12 had rapid clearance on both days. However, substantial decreases in clearance occurred in 3/12 subjects, all of whom had a history of ETS rhinitis. In two subjects, more than 90% of the tracer remained 1 hr after tracer administration (2 hr after smoke exposure). Understanding the basis for biologic variability in the acute effect of tobacco smoke on NMC may advance our understanding of pathogenesis of chronic effects of ETS.     

Investigations of high-performance GaAs solar cells grown on Ge-Si/sub 1-x/Ge/sub x/-Si substrates

High-performance p/sup +//n GaAs solar cells were grown and processed on compositionally graded Ge-Si/sub 1-x/Ge/sub x/-Si (SiGe) substrates. Total area efficiencies of 18.1% under the AM1.5-G spectrum were measured for 0.0444 cm/sup 2/ solar cells. This high efficiency is attributed to the very high open-circuit voltages (980 mV (AM0) and 973 mV (AM1.5-G)) that were achieved by the reduction in threading dislocation density enabled by the SiGe buffers, and thus reduced carrier recombination losses. This is the highest independently confirmed efficiency and open-circuit voltage for a GaAs solar cell grown on a Si-based substrate to date. Larger area solar cells were also studied in order to examine the impact of device area on GaAs-on-SiGe solar cell performance; we found that an increase in device area from 0.36 to 4.0 cm/sup 2/ did not degrade the measured performance characteristics for cells processed on identical substrates. Moreover, the device performance uniformity for large area heteroepitaxial cells is consistent with that of homoepitaxial cells; thus, device growth and processing on SiGe substrates did not introduce added performance variations. These results demonstrate that using SiGe interlayers to produce "virtual" Ge substrates may provide a robust method for scaleable integration of high performance III-V photovoltaics devices with large area Si wafers.     

Web-based systems design: a study of contemporary practices and an explanatory framework based on “method-in-action”

This paper reports the findings of a detailed study of Web-based systems design (WBSD) practices in Ireland based on data collected over a 3-year period (2002–2005), the objectives of which were to (1) contribute towards a richer understanding of the current “real-world” context of WBSD by characterising the profile of a typical project (team size, timeframe, nature of requirements, etc.) and identifying the key challenges, constraints, and imperatives (i.e. “mediating factors”) faced by Web-based system designers, and (2) understand how those contextual parameters and mediating factors influence the activity of WBSD as regards the selection and enactment of whatever design practices are therefore engaged (i.e. the use of methods, procedures, etc.). Data was gathered through a survey which yielded 165 usable responses, and later through a series of semi-structured qualitative interviews. Using grounded theory, an explanatory conceptual framework is derived, based on an extension of the “method-in-action” model, the application of which to WBSD has not been previously investigated in depth. It is proposed that this framework of WBSD issues is valuable in a number of ways to educators, researchers, practitioners, and method engineers.     

Les qualités psychométriques de l'échelle de comportements d'adaptation Loranger-Pépin.

Presents results of 3 studies on the psychometric properties of the LP-ABC (M. Loranger and M. Pépin, 1993), a French-language instrument for assessing general functioning in adults with mental retardation. The studies involved a total of 299 male and female Canadian adults with mental retardation. Results confirm the internal consistency, construct validity, criterion validity, discriminant validity, interrater reliability, and test–retest reliability of the LP-ABC. (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

Stabilization of Cubic Zirconia with Manganese Oxide

A directionally solidified eutectic (DSE) of MnO-ZrO₂ has been investigated using a variety of electron optical techniques. It is found that considerable MnO goes into ZrO₂ to form a substitutional solid solution. About 14 wt% of MnO is soluble in ZrO₂ close to the eutectic temperature. The solubility of ZrO₂ in MnO, however, is quite low, less than 0.50 wt%. Electron diffraction experiments indicate that ZrO₂ (MnO) has the cubic fluorite structure. Diffuse scattering, similar to other cubic zirconias (e.g., CaO, MgO stabilized zirconia), is also observed in manganese-stabilized zirconia. Diffuse scattering indicates the presence of oxygen vacancies and thus confirms the defect nature of the fluorite structure. Electron energy loss spectrometry (EELS) fine structure analysis of the Mn L₂₃ edge provided clear evidence that Mn is present as Mn²⁺ in Mn-stabilized cubic ZrO₂.     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

Solution of nonlinear kinematics of a parallel-link constrained Stewart platform manipulator

The Stewart platform manipulator is a fully parallel kinematic linkage system that has great advantages over typical serial link robots. However, one major problem in controlling this kind of manipulator is that, due to its closed kinematic chain and parallel-link constrained structure, it is impossible to derive an explicit kinematic solution. This paper proposes a simplified algorithm to numerically solve the forward kinematics of a six-links Stewart platform. Taking advantage of some fundamental geometric operations, the proposed algorithm involves only 3 nonlinear simultaneous equations. The explicit expressions are derived for some special configurations which can directly give the geometric limitations to motion in terms of the geometric dimensions of the platforms and the legs.Research was supported by Texas Advanced Technology program under grant 003656-008 and National Science Foundation under grant MSS9211970.