Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Making reusable reaction-bonded silicon nitride crucibles for silicon casting from kerf-loss silicon waste

Silicon kerf loss during wafer slicing and the broken quartz crucibles after silicon casting are two major solid wastes from photovoltaic (PV) industry. Especially, the recycle of kerf-loss silicon has become an urgent issue because near 100 000 t of solid wastes are generated every year. One of the most meaningful recycle routes of the kerf-loss silicon is to make silicon nitride crucibles to replace the quartz crucibles. In this study, we demonstrated how this is feasible through acid leaching refining, slip casting, and nitridation. The reaction-bonded silicon nitride (RBSN) crucibles after oxidation were found pure enough for silicon ingot growth. More importantly, they could be reused after ingot growth. With the present examples, the potential of using the kerf-loss silicon for fine ceramics is prominent.     

Emergence of Ag particles and their effects on the mechanical properties of TaN-Ag nanocomposite thin films

TaN-Ag nanocomposite films were deposited by reactive co-sputtering on tool steel substrates. The films were then annealed using RTA (Rapid Thermal Annealing) at 350 °C for 2, 4, 8 min respectively to induce the nucleation and growth of Ag particles in TaN matrix and on film surface. C-AFM (Conductive Atomic force Microscopy) and FESEM (Field-Emission Scanning Electron Microscopy) were applied to examine the Ag nano-particles emerged on the surface of these thin films. A nano-indenter and a pin-on-disk tribometer were used to study the effect of annealing on the films' mechanical properties. The results reveal that annealing by RTA can cause Ag nano-particles to emerge on the TaN surface. Consequently, the mechanical properties of the films will vary depending on annealing conditions, Ag content, and Ag particle emergence.     

Influence of A-site Ba substitution on microwave dielectric properties of (BaxMg1−x)(A0.05Ti0.95)O3 (A=Zr,Sn) ceramics

The microwave dielectric properties of (Ba_xMg_1−x)(A_0.05Ti_0.95)TiO₃ (A=Zr, Sn) ceramics were investigated with regard to substitution of Ba for Mg of A-site. The microwave dielectric properties were correlated with the Ba content. With an increase in Ba content from 0.01 to 0.1, the dielectric constant and the τ_f value increased, but the Q×f value decreased. The sintered (Ba_xMg_1−x)(Zr_0.05Ti_0.95)TiO₃ (called B_xMZT) ceramics had a permittivity in the range of 19.1−20.6, quality factor from 180,000 to 25,000 GHz, and variation in temperature coefficient of resonant frequency from −35 to −39 ppm/°C with increasing composition x. For sintered (Ba_xMg_1−x)(Sn_0.05Ti_0.95)TiO₃ (called B_xMST) ceramics, the dielectric constant increased from 19 to 20.5, Q×f value increased from 120,000 to 37,000 (GHz), and the τ_f value increased from −50 to −3.3 ppm/°C as the x increased from 0.01 to 0.1. When A=Sn and x=0.1, (Ba_0.1Mg_0.9)(Sn_0.05Ti_0.95)TiO₃ ceramics exhibited dielectric constant of 20.5, Q×f value of 37,000 (GHz), and a near-zero τ_f value of −3.3 ppm/°C sintered at 1210 °C for 4 h.     

Modelling complex manufacturing systems using discrete event simulation

This paper presents an approach in simulating complex manufacturing systems. The approach is founded on developing several general purpose simulation generators for an assembly station, a manufacturing cell, and an inventory transfer function. These simulation generators can then be linked together to create a model of a complex manufacturing system. A typical manufacturing system is modelled using these simulation generators and the results summarized.     

Transesterification of canola oil as biodiesel over Na/Zr-SBA-15 catalysts: Effect of zirconium content

A series of mesoporous Zr-SBA-15-supported Na catalysts was prepared and applied to the heterogeneous catalysis of canola oil transesterification. The effects of Si/Zr ratio, reaction time, and percentage of Na loading on the conversion to fatty acid methyl esters (FAME) were studied. The dependence of the textural structure and chemical properties of Zr-SBA-15 supports on Zr content was investigated using small-angle X-ray diffraction, Brunauer–Emmett–Teller analysis, transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy. The results obtained from FTIR and TEM indicate that the incorporation of Zr atoms into the SBA-15 structure facilitated the formation of Brönsted acid sites and decreased the particle size of Na species. Catalysts with a higher Zr content enhanced the FAME yield. The optimum conditions determined were as follows: reaction temperature of 70 °C, 15 wt.% Na, reaction time of 6 h, and 12% catalyst content (wt.% oil) with a methanol/oil molar ratio of 6:1. The optimum conditions resulted in a FAME yield of up to 99%.     

Cluster-Based Saliency-Guided Content-Aware Image Retargeting

Straightforward image resizing operators without considering image contents (e.g., uniform scaling) cannot usually produce satisfactory results, while content-aware image retargeting aims to arbitrarily change image size while preserving visually prominent features. In this paper, a cluster-based saliency-guided seam carving algorithm for content-aware image retargeting is proposed. To cope with the main drawback of the original seam carving algorithm relying on only gradient-based image importance map, we integrate a gradient-based map and a cluster-based saliency map to generate a more reliable importance map, resulting in better single image retargeting results. Experimental results have demonstrated the efficacy of the proposed algorithm.