本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。     

Interfacial Dipoles and Radiated Energy

Electric dipoles radiate an electromagnetic field into their surroundings. The electric and magnetic fields from a point source or from linear dipoles have components parallel to a spherical surface but also a radial component. In most investigations on radiated fields, only the part of the electric field that is parallel to a spherical surface is taken into account. The argument is that only that component contributes to the radiated energy. Here we show that the phase front in the lower half space is not a spherical surface and hence, the radial components contribute to radiated energy. We show differences in radiation patterns for point electric dipoles and linear dipoles, either modeled as perfectly conducting wires or as resistively loaded wires. Our primary interest lies with improving image resolution through processing of Ground-Penetrating Radar data. Here the emphasis lies with understanding the radiation characteristics of linear dipoles that can be incorporated with image processing algorithms. The model uses a thin-wire approximation for the transmitter antenna. The solution to the discrete system of equations is solved, incorporating interaction between the interface, using a CGFFT scheme including symmetrization and a newly developed preconditioning operator. We look at the electric and magnetic fields as well as the time-averaged Poynting vector radiation patterns in the E-plane and H-plane of the transmitting antenna. The results show that the radial component of the radiated electric and magnetic field is not negligible, even at distances more than seven wavelengths away from the antennas.     

Non-linear analysis of frames

A simple and easily programmable technique is proposed for the second-order analysis of frames. This technique involves the iterative process with modification of the stiffness matrix as well as the load vector in each iteration. Both curvature and sway effects are included. A numerical example is included to illustrate the results.     

Muon spin relaxation study of amorphous Hf2Co

Muon spin relaxation measurements were carried out in zero magnetic field on amorphous Hf₂Co. The results obtained and comparison with the behaviour of the muon in crystalline Hf₂Co (A. Baudry, P. Boyer, L.P. Ferreira, S.W. Harris, S. Miraglia and L. Pontonnier, J. Phys.: Condens. Matter, 4 (1992) 5025) indicate that muons occupy interstitial sites without Co atoms in first-neighbour positions and diffuse through those sites, suggesting the existence of some degree of short-range order in the amorphous structure. Muon diffusion cannot be described by a single thermally activated process and is faster in the amorphous alloy than in the crystalline alloy.     

Mixed convection boundary layer flow of a micropolar fluid along vertical cylinders and needles

An analysis is presented to investigate the effects of buoyancy and curvature on convection along vertical cylinders and needles placed in a micropolar fluid. The governing equations for momentum, angular momentum and energy are solved numerically by finite difference scheme. The heat transfer results are presented for a range of values of the buoyancy parameters, the curvature parameter and the material parameters of the fluid. The effect of the microrotation boundary conditions on heat transfer is discussed.     

TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.     

On-line coupled liquid chromatography-gas chromatography (LC-GC) and LC-LC-GC for detecting irradiation of fat-containing foods

Summary On-line coupled liquid chromatography-gas chromatography-flame ionisation detection (LC-GC-FID) enables efficient and unambiguous determination of irradiation for some fat-containing foods (e.g. meat). Other products, however, contain interfering components or are contaminated, e.g., with mineral oil. Since more selective detection by mass spectrometry has limited success, the determination was improved by a more selective isolation of some key components among the fat degradation products, e.g. the dienes or trienes, by LC-LC-GC-FID. Applications are shown for soup mixes, some spices, fish, and shrimps.

---

Nachweis der Bestrahlung fetthaltiger Lebensmittel durch direkt gekoppelte LC-GC und LC-LC-GC

Zusammenfassung Die Bestrahlung einiger fetthaltiger Lebensmittel, z. B. Fleisch, kann mit direkt gekoppelter LC-GC-FID rationell und eindeutig nachgewiesen werden. In anderen Proben wird die Analyse aber durch Inhaltsstoffe des Produktes oder durch Verunreinigungen (z. B. mit Mineralöl) gestört. Da selektivere Detektion durch Massenspektrqmetrie wenig verspricht, wurde der Nachweis durch selektivere Isolierung von Schlüsselkomponenten unter den Bestrahlungsprodukten, z. B. der Diene oder Triene, mittels LC-LC-GC yerbessert. Anwendungen werden gezeigt für Suppenpulver, einige Gewürze, Fisch und Garnelen.

     

Controlled oxidation of methane doped catalysts irradiated by microwaves

The oxidative coupling of methane has been studied on a (SmLiO₂)_0.8(CaOMgO)_0.2 catalyst by using two different modes of heating: a conventional oven and a microwave irradiation set-up. The C₂ selectivity obtained with microwave heating was much higher than with conventional heating especially at low conversions. This difference could arise from the reduction of oxidation products (ethane, ethylene) in the gas phase under microwave irradiation.     

Transition metal- chalcogen systems XI: the platinum- selenium phase diagram

The platinum-selenium phase diagram was investigated by differential thermal analysis, metallography, and X-ray powder diffraction methods. The two previously known intermediate phases, Pt₅Se₄ and PtSe₂, both melt congruently: Pt₅Se₄ at ∼1070 °C and PtSe₂ (under its own vapor pressure) at 1245 ± 10 °C. Pt₅Se₄ forms a eutectic with Pt at 1065 ± 2 °C and ∼42 at % Se and another one with PtSe₂ at 1067 ± 2 °C and somewhat below 45 at.% Se. On cooling, Pt and PtSe₂ form a metastable eutectic at 1037 ± 2 °C and ∼43 at % Se. Between PtSe₂ and Se, a degenerate eutectic was found at 221 °C, which also indicates negligible solubility of platinum in solid selenium.     

Fatigue behaviour of a phenolic matrix composite

This paper presents results of a fatigue life investigations carried out in plate specimens of a fibre-glass-reinforced phenolic matrix composite. Tensile and Young's modulus data were obtained at four different testing temperatures (room temperature, 100, 150 and 200 °C). The fatigue S−N data were obtained at room temperature only and for two stress ratio values (R=0 and 0.4). Fatigue and tensile behaviour was assesesed in the composite with the fibres aligned in the longitudinal loading direction. The results were obtained for two values of volume fraction (0.28 and 0.42) and three different glass surface treatments. A detailed comparison of fatigue results is given taking into account several fatigue parameters and also the testing variables. Results of observations of SEM fracture surfaces are also presented.