大变量逻辑函数最佳覆盖问题研究

逻辑函数的最佳覆盖，一直是逻辑综合领域的关键环节。尤其是大变量逻辑函数最佳覆盖，对复杂的逻辑综合更为重要，但也更加困难。本文在对逻辑覆盖算法研究的基础上，提出了适合大变量逻辑函数最佳覆盖的Beister改进算法。经过大量算题的测试表明，改进的列覆盖算法在时间复杂度和选择效果方面均优于Beister算法。     

μC/OS-Ⅱ在ADSP-BF531上的移植

介绍源代码公开的实时操作系统μC/OS-Ⅱ的特点、内核结构及ADSP-BF531的硬件特征,同时给出将μC/OS-Ⅱ移植到ADSP-BF531型数字信号处理器上的详细步骤和关键代码.     

硫化矿石氧化性的实验室综合评判

探讨了一种硫化矿石氧化性综合评判的新方法 ,并将该方法应用于矿山实际 ,得到了准确的评判结果。该项成果对于硫化矿石自燃防治理论与技术的研究具有很高的参考价值。     

硫在铅熔炼过程中的行为分析

介绍了铅烧结焙烧-鼓风炉还原熔炼过程中硫的分布及存在形态，着重分析了混合料含硫量与结块率的关系，得出了混合料含硫的临界值。论述了烧结块中残留的硫离子及硫酸根离子对铅熔炼生产的影响。针对硫的不同存在形态，提出了有效的解决办法和改进措施。     

舰艇电子战综合对抗系统应用探讨

通过对现代海上电子战特点深刻探讨。分析了现代海战条件对舰船电子战对抗能力需求。并对现代舰船电子战综合对抗系统所采用的新技术情况进行探讨。     

Resource management in the next-generation DS-CDMA cellular networks

Direct sequence code-division multiple access has been shown as the predominant access technology to provide high-speed multimedia services in next-generation wireless cellular networks. The DS-CDMA cellular network significantly differentiates itself from the traditional narrowband TDMA/FDMA system, in which great capacity gain can be explored by taking advantage of its unique characteristics. This article addresses resource management in DS-CDMA cellular networks. We first provide an overview of the DS-CDMA network and discuss the main challenges in the design of resource management schemes. We then examine several critical issues within the scope of resource management, including congestion control, rate and power control, and cell planning, with the emphasis on call admission control. Finally, we offer some insights and discussions on the performance aspects, strengths, and weaknesses of existing proposals.     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

重油催化装置试运转技术分析

中石油宁夏大元炼油化工有限责任公司2套60万 t/aRFCCU,采用逆流两段再生新工艺,对投料试生产期间出现的问题进行技术分析,同时对装置操作特点等进行总结分析     

阳离子交换树脂铁中毒的复苏研究

软化器中使用的阳离子交换树脂容易受到铁离子的污染。采用均匀设计的方法,利用回归分析和最优化技术,研究了复苏剂中各组分对阳离子复苏效果的影响,得出了最佳复苏配方,开发出了一种新的复苏方法。这种方法具有腐蚀性低和复苏效果良好的特点,为生产现场树脂的复苏提供了有益的借鉴。     

管板现场堵漏焊接中的技术要点

在对列管进行堵管时 ,如果堵头形状和加工尺寸不合理 ,焊接工艺不当 ,在焊缝处极易出现气孔、裂纹等现象 ,在仰焊时还易出现夹渣现象 ,造成新的泄漏。因此 ,管板现场堵漏时要注意以下几点 :1 )焊接材料的选择由于现场管板堵漏时列管内介质很难清除干净 ,特别是列管内存在少量水