The search for optimum solutions for melting insulator glass

The effect of the temperature conditions of melting and the design features of the glass melting furnaces on the increase in the specific removal of glass melt in processing quenched insulating parts of high-voltage suspension insulators is demonstrated. Designs are proposed for glass melting furnaces and glass melting temperature regimes whose use will increase the economy of manufacturing insulators.     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

Guerbet十四醇的合成与表征

以正庚醇为原料 ,通过Guerbet反应合成Guerbet十四醇 (2 戊基壬醇 ,C14 GA)。用IR、NMR和元素分析测定了C14 GA的结构 ,并研究了反应温度和用料比对其产率的影响。实验结果如下 :(1)在较优化的反应条件下 (正庚醇的总加入量为 1mol,在实验过程中 ,先加入 1/ 3mol庚醇和 1/ 4mol的KOH ,在 16 0℃下反应 2h ,然后再加入剩下的 2 / 3mol庚醇和 4g 5 %Pd -C催化剂 ,在 15 5℃下反应 6h)合成产物 ,其产率可达到 5 4 2 0 % ;(2 )所合成的产物与试图要得到的Guerbet十四醇 (2 戊基壬醇 ,C14 GA)含有相同的基团 (2×—CH3、10×—CH2 —、1×CH、1×—CH2 —O—和 1×—OH) ,而且 ,所合成的产物中 ,w (C) =79 0 6 % ,w (H ) =13 6 2 % ,与从Guerbet十四醇分子式计算的理论值w(C) =78 5 0 % ,w (H) =14 0 1%基本一致。可见所合成的产物正是Guerbet十四醇 (C14 GA)     

Ignition and Combustion of Dust-Gas Suspensions

The ignition and combustion of dust-gas suspensions are considered. It is shown that the ability of these systems to accumulate heat is determined not only by their kinetic and thermal properties but also by the relation between their reaction surface and the heat-removal surface (f). Experimental information on flame temperatures, ignition delays, and flame propagation over gas suspensions is processed using the parameter f, and the postulate on the stimulating role of the developed reaction surface in activating these processes is validated. It is shown that during overall burning, diffusion combustion of particles occurs only for rather small values of f. The ambiguous effect of the parameter f on the ignition and combustion processes leads to the necessity of optimizing the fuel size distribution and concentration for the effective operation of the power devices. The role of the macroparameters of two-phase flames of refractory metals in the synthesis of combustion nanoproducts is analyzed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 6, pp. 3–14, November–December, 2005.     

溴虫腈土壤和甘蓝微量残留量的气相色谱法测定

采用气相色谱法定量分析溴虫腈土壤和甘蓝微量残留量。样品经丙酮提取 ,液 液分配及氧化铝柱层析法净化后 ,以GC ECD测定 ,DB 170 1毛细管柱 ,氮气为载气 ,柱温 2 6 0℃ ,汽化室温度 2 5 0℃ ,检测器温度 2 80℃ ,外标法定量。该方法快速、准确 ,在 0 0 1～ 2 0 0mg/L范围内线性相关系数r2 =0 9999,平均回收率 90 0 %～ 10 3 6 7% ,变异系数 4 4 8%～ 5 89% ,最小检测量 2× 10 12 g ,最低检出浓度 3 3× 10 4mg/kg。     

Interrelationship of the baric index for the normal burning velocity of gas—Air mixtures and the kinetics of trimolecular reactions in a flame front

Through numerical simulation of flame propagation through a methane- and hydrogen-air mixture, with consideration given to the transfer and chemical reactions, we have investigated the relationship between the kinetics of trimolecular reactions and the baric index of the normal burning velocity. It has been demonstrated that the lower the constants of the trimolecular reaction rates, the higher the magnitude of the baric index. In the case of methane the baric index, although it grows, it nevertheless remains negative, while in the case of hydrogen this index changes sign.Balashikha. Translated from Fizika Goreniya i Vzryva, No. 2, pp. 46–49, March–April, 1991.     

Product composition of the dynamic conversion of brown coal in supercritical water

The product composition of the dynamic conversion of brown coal, which was continuously supplied as a water-coal slurry to a flow reactor at 30 MPa, was studied. The temperature of water and coal particles was increased from room temperature to 400°C (top part of the reactor). The conversion of the organic matter of coal was ～48%, and the products collected at the reactor outlet consisted of solid tar components, substances dissolved and emulsified in water, and volatile substances, whose major constituent was CO₂. The composition of solid tar components and oils was determined.     

High-temperature rheological properties of clay bodies and bodies plasticized with clay

Conclusions We determined the rheological properties of clay materials at elevated temperatures. With an increase in the temperature and pressure the structural-mechanical constants diminish, and the plasticity increases. The total proportion of elastic and plastic deformations reaches significant values (92–95%) in kaolins at 1450°C, and in Chasov-Yar clay at 1200–1250°C. It is in these conditions precisely that we obtain the densest thermal-pressed products.With optimum thermoplastic pressing temperatures the various clay materials have the closest viscosity and maximum yield point values.The best natural raw material for thermoplasticizing is Chasov-Yar clay, but it is possible to use other clay materials. It is possible to regulate the rheological properties of bodies by varying the compositions (filler + thermoplasticizer) of the bodies, the pressing temperature, and pressure.The rheological properties of mixtures of zircon and thermoplasticizer (10% Chasov-Yar clay) at 1450–1480°C facilitate the production of especially dense products for continuous steel casting. Tests carried out on continuous casting plant were successful.Translated from Ogneupory, No. 6, pp. 43–51, June, 1973.