上海东方体育中心综合体育馆屋盖结构风振分析

在屋盖同步风洞试验测量的基础上,采用CQC法对上海东方体育中心综合体育馆大跨屋盖进行了较为准确的空间风振分析。分析了多个复杂空间振型对有代表性节点的动位移根方差的影响,得到本体育馆的最大参振振型为30阶;考虑了两种荷载组合工况,比较了工况1、工况2和自重作用下屋盖结构的节点位移和基底反力,工况1作用下的节点位移和基底反力最大,工况2作用下的相应结果最小;最后给出了5个不利风向下的位移风振系数,可供参考。     

Optimum location of surface wells for remote pressure relief coalbed methane drainage in mining areas

Based on engineering tests in the Huainan coal mining area,we studied alternative well location to improve the performance of surface wells for remote pressure relief of coalbed methane in mining areas.The key factors,affecting location and well gas production were analyzed by simulation tests for similar material.The exploitation results indicate that wells located in various positions on panels could achieve relatively better gas production in regions with thin Cenozoic layers,low mining heights and slow rate of longwall advancement,but their periods of gas production lasted less than 230 days,as opposed to wells in regions with thick Cenozoic layers,greater mining heights and fast rates of Iongwall advancement.Wells near panel margins achieved relatively better gas production and lasted longer than centerline wells.The rules of development of mining fractures in strata over panels control gas production of surface wells.Mining fractures located in areas determined by lines of compaction and the effect of mining are well developed and can be maintained for long periods of time.Placing the well at the end of panels and on the updip return airway side of panels,determined by lines of compaction and the effect of mining,would result in surface wells for remote pressure relief CBM obtaining their longest gas production periods and highest cumulative gas production.     

POLYFLOW逆向挤出功能在挤出方型物口模设计中的应用

以方型材挤出口模设计为例,建立了几何模型、数学模型及有限元模型。通过在POLYFLOW模拟软件中构建任务并定义各项参数,利用重新生成网格技术,进行了数值模拟和分析,得出如何有效应用POLYFLOW逆向挤出功能对方型材挤出口模进行设计。研究表明:POLYFLOW逆向挤出功能可以提前预测其变形倾向,提高了口模设计一次性成功率,缩短口模的开发周期,降低成本。     

Preparation,characterization and salt-resistance of a coal based super absorbent composite

Potassium humate was extracted from brown coal.A novel super absorbent composite,poly (acrylic acid-co-acrylamide)/potassium humate (PAA-AM/KHA),was prepared by graft polymerization of acrylic acid,acrylamide and coal based potassium humate using N,N'-methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator.The effects of reaction temperature,degree of neutralization of the poly (acrylic acid) and the amounts of crosslinker,initiator and potassium humate were investigated.Salt resistance tests were also carried out.The composite prepared under optimal conditions had a potassium humate content of 10% and exhibited a water absorption of 770 g/g in distilled water,and 349,286 and 41 g/g in 0.5 mol/L KC1,MgCl2 and AlCl3 solutions respectively.The results indicate that the salt resistance of PAA-AM/KHA was superior to that of poly (acrylic acid-co-acrylamide) because of the collaborative effect of functional groups of the coal based potassium humate.The PAA-AM/KHA micro powder was characterized by IR spectroscopy and the micrographic surface was characterized by scanning electron microscopy.Introduction of potassium humate into the poly (acrylic acid-co-acrylamide) structure creates a composite more suitable for use as a water-managing material in the renewal of arid and desert environments.The salt resisting property of the composite is improved,production costs are reduced and the growth stimulant effect is still present.     

鄂东南沿江湖区“灌江纳苗”的认知度调查

本文对拟开展＂灌江纳苗＂工作的目标湖区进行实地调查和深度访谈,调查了大冶湖、网湖、海口湖、朱婆湖四个不同通江湖泊受访人群对＂灌江纳苗＂的知晓率和支持率,并采用问卷调查的方式研究了四个目标湖泊养殖鱼类年产量的变化情况以及四湖受访人群对养殖鱼类品种了解程度。结果显示,在目标湖区开展灌江纳苗工作有一定的群众基础,但也存在一定的工作难度;目标湖区的经济鱼类品种在减少,实施灌江纳苗工作已迫在眉睫。     

解代数方程时Halley迭代法的收敛性

讨论同时求解代数方程所有单根时Halley迭代法的收敛性,给出了保证其收敛的初值应满足的一个充分条件,使Halley迭代法的收敛性获得新的表述和证明。     

Removal characteristics of disinfection by-products formation potential by bioaugmentation activated carbon process

The high-active bacteria were screened from 8 dominant bacteria obtained from the natural water body,and then the bioaugmentation activated carbon was formed by hydraulic immobilization of the high-active bacteria. Plant-scale studies on removal characteristics of disinfection by-products formation potentials (DBPFP) by bioaugmentation activated carbon process were conducted for micro-polluted raw water treatment. The results show that the bioaugmentation activated carbon process has adopted better purification efficiency to THMFP and HAAFP than traditional biological activated carbon process,and that average removal efficiencies of THMFP and HAAFP can reach 35% and 39.7% during the test period,increasing by more than 10% compared with traditional biological activated carbon process. The removal efficiencies of THMFP and HAAFP are stable because of the biodegradation of the high-active bacteria and the adsorption of active carbon. The biodegradability of CHCl3 formation potential is better as compared with that of CHCl2Br and CHClBr2 formation potentials among THMFP,and high removal efficiency of CHCl3formation potential is obtained by bioaugmentation degradation of the high-active bacteria. The biodegradability of HAAFP is better in comparison with that of THMFP,and the chemical properties of HAAFP are propitious to adsorption of activated carbon. Thus,HAAFP is on predominance during the competitive removal process with THMFP.     

Numerical investigation on bowed blades of Iarge meridional expansion Turbine

To improve the performance of the Turbofan engine,several measures should be considered during design process.Such measures,relating to aerodynamic characteristic design,include the maximum enthalpy per stage,the shortest axial length,the minimum blade rows and the highest efficient in design and off design condition.To satisfy theses design characters,the meridian geometry of the engine will he excurvature at a high degree transition part between HP and LP turbines.The study is to investigate the effect of blade bowing on flow loss at blade tip and root of the type of turbine.Such turbine,tending towards separation,with severe secondary flow at the tip and strong radial flow at exit,was simulated by the 3D N-S solver Numerea,and there were several different stacking line bowing schemes in all.The results show that tip negative bowing and root positive bowing is able to weaken radial flow,consequently reduce the flow loss at the tip and root.     

Crack elongation and its width of large depth reinforced concrete beams

In order to meet the requirement of structural inspection,the crack spacing and crack width at various heights in the tensile zone of six large depth reinforced concrete beams were measured under several loading levels of serviceability state.The effects of the depth of normal section beams on the crack spacing and crack width were analyzed,and the modified model is proposed for calculating the average crack spacing by thinking about the depth of normal section,the reinforcement arrangement and the effective reinforcement ratio.The relationships of crack widths at any position in the tensile zone and at the reinforcement level on the side surface of beam were studied.By theoretical and statistical analysis,a method is proposed to calculate the ratios of crack widths between any position and the reinforcement level on the side surface of large depth reinforced concrete beams.     

Ug注射模设计系统在模具设计与制造中的应用

采用Ug Mold Wizard系统设计注塑模的工作流程,以及Ug Mold Wizard注射模具设计相关的模块,探讨了Ug Mold Wizard进行注塑模设计的具体设计流程和KBE知识工程的调用过程。借助计算机辅助扣板塑料模具设计及制造实例,得出Ug Mold Wizard在注塑模设计中的优化调用模具设计方案和仿真过程。该系统在注射模具设计与制造中的应用促进注射模具设计与制造的无纸化和产品短周期化进程。