一种生成p元统一序列的快速算法

p元统一序列是近期提出的一种具有理想自相关性能的多元序列,但是原有的生成方法比较复杂,不好实现。这里提出了一种快速生成p元统一序列的算法,该算法借助m序列的和序列作基础序列,和相应内部序列的移位序列可以快速生成任何长度的p元统一序列,比以往的生成方法简单易行且易于理解。     

FE Simulation for Internal Inversion of Aluminium Alloy Tube

1 Introduction A double-walled invertube is difficult to fabricate other than applying inversion process. Such kind of invertube can be used as impact energy absorbing element in transport vehicles, like aircrafts and automobiles. Reddy T Y[1] did the analysis of Internal inversion and calculated the inversion load. Reid[2] et al. examined nosing and internal inversion of cold drawn steel tube by the finite element package ABAQUS. Recently, Rosa P A[3] et al. investigated Internal invers…     

基于CAN总线的汽车测试解决方案

更高功能的汽车设计带动更复杂的汽车电子测试技术的发展。中国的汽车测试界尤其面对着设备的短缺、技术的匮乏等诸多困难。本文针对中国的汽车电子测试业。介绍了一种集成的软硬件同步平台。它基于CAN总线领域中的PXI总线。及国际广泛应用的测试管理TestStand软件。构建成高集成度、可靠性、升级维护方便、开放彻底的测试系统。     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.     

下消化道出血DSA诊断及栓塞结合小剂量垂体后叶素灌注治疗

目的探讨不明原因下消化道出血的DSA诊断及介入栓塞治疗的临床应用价值.方法对32例不明原因下消化道出血患者行DSA检查,通过显示造影剂外溢、病理血管和肿瘤染色来确定出血原因及部位,对出血处行超选择性动脉栓塞治疗和留置导管灌注小剂量垂体后叶素维持12 h止血治疗.结果DSA诊断阳性率75%(24/32),其中肠伤寒2例,肠结核1例,血管性病变14例,肿瘤7例.阳性者介入手术成功20例,手术成功率83.3%,无一例严重并发症.结论DSA检查和介入治疗对诊断不明确或保守治疗无效的下消化道出血有着重要的诊断及治疗     

阳离子化多元醇防塌剂的研制

室内研究和现场应用表明,聚乙烯醇类防塌剂表现出较明显的增粘负效应,可引起钻井液粘度的急剧增加,严重影响其推广应用.通过金属盐催化降解和阳离子化反应,研制出了抑制性好且增粘负效应低的阳离子化改性多元醇防塌剂.考察了阳离子化试剂、反应温度、反应时间对取代度、反应效率和产品主要性能的影响,得出了阳离子化多元醇防塌剂最佳制备条件,即：PVA与阳离子化试剂物质的量比为1：1,反应温度为50℃,反应时间为4 h,阳离子度可达0.435.     

ZnS掺杂技术研究及应用现状

对现阶段国内外在ZnS及ZnS基材料掺杂改性方面的研究成果作一概述性介绍，综述了纳米级ZnS发光材料掺杂改性的基本机理，主要的掺杂技术、方法，并对多种掺杂元素的效果进行了分析比较。     

Wideband miniature G-shaped antenna for dual-band WLAN applications

A wideband miniature G-shaped coplanar waveguide fed dual-band antenna for a wireless local area network (WLAN) is proposed. The proposed antenna has good radiation pattern and can provide two separate measured impedance bandwidths of 0.55 GHz (about 22.9% centred at 2.42 GHz) and 2.85 GHz (about 50.9% centred at 5.60 GHz), so that it easily covers the required bandwidths for WLAN operation. This design results in a small antenna size of 22 times 18.5 mm with the ground plane regarded as part of the antenna structure.     

电源对介质阻挡放电(DBD)激发准分子(XeCl*)辐射的影响

本文对电源参数如电压幅值、频率及正负电压对介质阻挡放电激发准分子XeCl 紫外 (30 8nm)辐射的影响进行了实验研究。结果表明 ,UV辐射随电压幅度的增加而增强 ,但效率下降 ;提高频率 ,增加了放电次数 ,导致UV辐射的增强 ;此外 ,在较高的频率下 ,电压上升沿变陡 ,使得电子获得的能量主要用于原子的激发和电离。正、负电压放电的不对称源于电极结构的不对称而引起的放电过程的差异 ,负电压内电极可向放电管中馈入更多的能量 ;比较发光光谱可判断生成准分子的等离子体化学过程没有明显的差别