Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Equilibrium and kinetic studies of the extraction of chelated copper(II) anions with Aliquat 336

The equilibrium and kinetics of solvent extraction of Cu²⁺ from aqueous solutions containing equimolar EDTA with Aliquat 336 in n‐decanol and kerosene at 298 K were investigated. The concentrations of Cu²⁺ (8–50 mol m^?3), Cl^? (5–60 mol m^?3), and Aliquat 336 (20–100 mol m^?3) were varied. A semi‐empirical model with three parameters was proposed to describe the equilibrium behavior, in which the non‐idealities in both aqueous and organic phases were considered. Over the ranges studied, the model agreed reasonably well with the experimental data (standard deviation, 15%). The forward and backward reaction rate constants were determined as (5.31 ± 0.16)×10^?6 m^9/4 mol^?3/4 s^?1 and (2.62 ± 0.09)×10^?7 s^?1, respectively, at 298 K. An interfacial reaction mechanism was proposed, which revealed that the reaction between the chelated anions and trimeric amine molecules at the interface was rate limiting. The derived rate laws were consistent with the experimental results. © 2002 Society of Chemical Industry     

Adhesion properties of UV crosslinked polystyrene-block-polybutadiene-block-polystyrene copolymer and tackifier mixture

The peel and tack properties of mixtures of polystyrene-block-polybutadiene-block-polystyrene (SBS) and a tackifier were investigated after these were crosslinked by ultraviolet (UV) irradiation at various amounts of benzophenone (BP) as a photoinitiator and trimethylolpropane mercaptopropionate (TRIS) as a crosslinking agent.The degree of crosslinking of polybutadiene (PB) block in the SBS mixture was qualitatively estimated from the amount of gel fraction as well as the change in the glass transition temperature of the PB block. The crosslinking of the PB block was done within 3 min after UV irradiation and the peel strength of crosslinked specimens was as low as 45[percnt] of specimens without crosslinking. Nano-tack and bulk tack properties as well as the surface tension of mixtures were measured depending upon amounts of BP and TRIS.     

Durability of glass‐fiber‐reinforced polymer nanocomposites in an alkaline environment

This study was conducted to determine the effect of clay content in GFRP (glass‐fiber‐reinforced polymer) composite samples as they were aged in an alkaline solution. Two kinds of GFRP composite samples were prepared. One was E‐glass‐fiber‐reinforced vinyl ester polymer, and the other was nano‐GFRP composites prepared with the addition of 1 and 2 wt% of montmorillonite clay to the polymer matrix. These samples were aged in alkaline solution of pH 13.2 with and without sustained load. The load was 1335 N or 18.7% of the tensile strength of the composite samples. The aging was evaluated by measuring the reduction in tensile strength after 6 months. Also, absorption of alkaline solution into the plain and nano‐GFRP samples was investigated so as to elucidate the diffusion behaviors. It was found that for a short exposure time (e.g. 1 month) and without sustained load, dispersing 2 wt% of the nanoclay in the polymer matrix of the GFRP samples reduces the diffusivity by 39%. However, with the application of sustained load, the glass fiber composite samples deteriorate more with increasing clay content. The reduction in tensile strength was 7.1%, 12.1%, and 18.1% for the samples containing 0, 1, and 2 wt% of clay, respectively. J. VINYL. ADDIT. TECHNOL., 12:25–32, 2006. © 2006 Society of Plastics Engineers     

Bit-level systolic arrays for modular multiplication

This paper presents bit-level cellular arrays implementing Blakley's algorithm for multiplication of twon-bit integers modulo anothern-bit integer. The semi-systolic version uses 3n(n+3) single-bit carry save adders and 2n copies of 3-bit carry look-ahead logic, and computes a pair of binary numbers (C, S) in 3n clock cycles such thatC+S[0, 2N). The carry look-ahead logic is used to estimate the sign of the partial product, which is needed during the reduction process. The final result in the correct range [0,N) can easily be obtained by computingC+S andC+S–N, and selecting the latter if it is positive; otherwise, the former is selected. We construct a localized process dependence graph of this algorithm, and introduce a systolic array containing 3nw simple adder cells. The latency of the systolic array is 6n+w–2, wherew=n/2. The systolic version does not require broadcast and can be used to efficiently compute several modular multiplications in a pipelined fashion, producing a result in every clock cycle.     

Compression based clustering technique for enhancing accuracy in web scale videos

Multimedia Tools and Applications - Detection and clustering of commercial advertisements plays an important role in multimedia indexing also in the creation of personalized user content. In...     

沧州市2006~2016年春季大到暴雨特征分析

根据沧州市92个雨量监测站2006~2016年间的春季大到暴雨资料,研究了11年来沧州市春季大到暴雨的特征指标、时间变化规律以及空间变化趋势.研究发现:沧州市11年间春季大到暴雨强度(站点数)的时间变化呈抛物线趋势,与沧州市年降水量变化趋势非常接近;沧州市春季大到暴雨的空间分布情况为各县市均有发生,但分布不均匀,子牙新河沿岸出现高值区,以子牙新河为界,向两侧递减.     

Temperature and grain size dependence of superplasticity in a Zn−0.3wt.%Al alloy

The superplastic deformation behavior of quasi-single phase Zn-0.3 wt. %Al was investigated. A series of load relaxation and tensile tests was conducted at various temperatures ranging from RT (20 °C) to 200 °C. The recently proposed internal variable theory of structural superplasticity was applied. The flow curves obtained from load relaxation tests were shown to consist of contributions from interface sliding (IS) and accommodating plastic deformation. In the case of quasi-single phase Zn-0.3 wt.% Al alloy with an average agrain size of 1 μm, the IS behavior could be described as a viscous flow process characterized by a power index of M_g=0.5. A large elongation of about 1400% was obtained at room temperature and the strain rate sensitivity parameter was about 0.4. Although relatively large-grained (10 μm) single phase alloy showed a high value of strain rate sensitivity comparable to that of fine-grained alloy at very low strain rate range, IS was not expected from the analysis based on the internal variable theory of structural superplasticity at room temperature. As the temperature increased above 100 °C, however, the contribution from IS was observed at a very low strain rate range. A high elongation of ∼400% was obtained in a specimen of 10-μm-grain-size at 200 °C under a strain rate of 2×10⁻⁴/sec. Jointly appointed at Center for Advanced Aerospace Materials (CAAM)     

Joining alumina to inconel 600 and UMCo-50 superalloys using an Sn10Ag4Ti active filler metal

Alumina ceramics were brazed to Inconel 600 and UMCo-50 superalloys at 900 °C for 10 min using an Sn10Ag4Ti active filler metal. The brazing filler showed good wettability on alumina and superalloys. The flexural strengths were 69 and 57 MPa for alumina/Inconel 600 and alumina/UMCo-50 joints, respectively. In both cases, the brazed specimens fractured along the Sn10Ag4Ti/superalloy interfaces after four-point bending tests. Electron probe microanalysis (EPMA) elemental mapping revealed that the Ni of Inconel 600 and the Co of UMCo-50 dissolved into Sn10Ag4Ti filler metal, which serves to reinforce the weak Sn10Ag4Ti matrix.     

Simulation of ultrasonic-vibration drawing using the finite element method (FEM)

In ultrasonic-vibration drawing, wires are drawn while ultrasonic vibration is applied to a drawing die. Prior studies provide experimental proof that ultrasonic-vibration drawing reduces drawing resistance, improves lubrication and prevents wire breakage. In the future, ultrasonic-vibration drawing is expected to contribute to the drawing of difficult-to-draw materials and operations, such as shaped wires, ultrafine wires, and the wire drawing operation in semidry or dry condition. However, a detailed analysis and understanding of the mechanism of improvement is not possible on the basis of conventional experimental observations because the ultrasonic-vibration processing phenomenon occurs at high speed. Therefore, we attempted to understand the processing mechanism of ultrasonic-vibration drawing using the finite element method (FEM). ABAQUS was used for the FEM. Drawing force and stress–strain distributions in drawn wires were analyzed. From these studies, we quantitatively clarified the mechanism of improved drawing characteristics, such as decreased drawing force.