Spatial gamut mapping algorithms for cross‐display color reproduction

Abstract— Owing to the fast developments of computer networks and color imaging technologies, there is a tendency towards remote proofing in the printing or textile industries. More cases such as cross‐display color matching will occur in the future information society. The problems of color mismatching we usually find in cross‐display devices have been widely discussed today. In this paper, to achieve equivalent color matching between a sRGB monitor and an Adobe RGB monitor, the spatial gamut mapping algorithm (SGMA), which introduces sigmoidal tone mapping, multi‐mapping paths, and unsharp mask (USM) operation into a sRGB color‐management system, is proposed. According to the designs of USM locations, this proposed SGMA can be further developed into pre‐USM, post‐USM, and double‐USM types. Besides, two critical image characteristics, edge map and color histogram, are investigated to establish the relationship between image content and SGMA. The psychophysical experimental results show that double‐USM SGMA obtains better color matching than the other spatial types.     

The Effectiveness of Short Message Service for Communication With Concerns of Privacy Protection and Conflict Avoidance

Why would people use Short Message Service (SMS) to say something they would not say in person? There is a trend that SMS is becoming more and more popular because it facilitates more extended modes of communications. Using technology acceptance model, we hypothesize the attitude of SMS would be influenced by its perceived effectiveness for communications, perceived ease of use, and subjective norm. Besides the special aspects of communications, conflict avoidance and privacy protection will enforce the impact of perceived effectiveness of SMS for communication. We investigated 953 SMS users and the results support most of our hypotheses. Furthermore, our analyses also show there are differences between females and males on the influence mechanism behind their attitude towards SMS.     

Enabling adaptive live streaming in P2P multipath networks

Live Internet streaming can be regarded as a major current multimedia delivery mode. Efficient delivery under changing network conditions is a severe challenge in the design of live streaming systems. This study analyzes the key considerations and factors influencing live stream quality during system operations, and attempts to improve present P2P (peer-to-peer) live streaming systems by allowing users to enjoy high quality of service under the limitations of network resources. The proposed R-D (Rate-Distortion) optimized-dynamic-nodes-join algorithm is based on multipath streaming concept and receiver-driven approach. This distributed algorithm enables the system to evaluate the current network status in order to optimize the end-to-end distortion of P2P networks and stay in the optimal status. Experiment results of this study demonstrate the effectiveness of the proposed approach.     

Spin-valve planar Hall sensor for single bead detection

The planar Hall effect (PHE) sensor with a junction size of 3 μm × 3 μm for a single micro-bead detection has been fabricated successfully using a typical spin-valve thin film Ta(5)/NiFe(16)/Cu(1.2)/NiFe(2)/IrMn(15)/Ta(5) nm. The PHE sensor exhibits a sensitivity of about 7.2 μV Oe^?1 in the magnetic field range of ±7 Oe approximately. We have performed an experiment to illustrated the possibility of single micro-bead detection by using a PHE sensor. A single micro-bead of 2.8 μm diameter size is secluded from 0.1% dilute solution of the Dynabeads^® M-280 dropped on the sensor surface and is located on the sensor junction by using a micro magnetic needle. The comparison of the PHE voltage profiles in the field range from 0 to 20 Oe in the absence and presence of a single micro-bead identifies a single Dynabeads^® M-280, the maximal signal change as large as ΔV ～ 1.1 μV can be obtained at the field ～6.6 Oe. The results are well described in terms of the reversal of a basic single domain structure.     

An improvement on the digital redesign method using fuzzy PWM controller

In this paper, a new digital redesign composed of pulse width modulator (PWM) is proposed. The proposed PWM combines fuzzy logic with genetic algorithm (GA) to tune the parameter of the proposed controller such that the output response of hybrid system closely matches the one of original continuous system. Finally, an illustrated example is proposed to show the proposed method is superior to the existing one.     

Combining GA and iterative searching DOA estimation for CDMA signals

This paper deals with direction-of-arrival (DOA) estimation based on iterative searching technique for code-division multiple access signals. It has been shown that the iterative searching technique is more likely to converge to a local maximum, causing errors in DOA estimation. In conjunction with a genetic algorithm for selecting initial search angle, we present an efficient approach to achieve the advantages of iterative DOA estimation with fast convergence and more accuracy estimate over existing conventional spectral searching methods. Finally, several computer simulation examples are provided for illustration and comparison.     

Electroplating of nickel films at ultra low electrolytic temperature

In this paper, we have demonstrated a successful electroplating process of nickel (Ni) in a sulfamate electrolyte bath at ultra low electrolytic temperatures of 273–278 K. The potentiostatic mode is essential for the electroplating process rather than galvanostatic mode. The reason is that diffusion-limited current can be easily obtained by applying a specific potential which is higher than reduction potential. On the contrary, galvanostatic mode can not identify the diffusion-limited current and the reduction will suspend while the setting current is higher than diffusion-limited current ranged in hundreds of μA. The microstructure, morphology and hardness of the Ni electrodeposits were characterized using grazing incidence x-ray diffractometer, atomic force microscopy and nano-indentation test were performed. The hardness of Ni film was much enhanced to around 6.37 GPa at 273 K to 6.18 GPa at 278 K compared with that around 4.11 GPa at 288 K to 4.01 GPa at 293 K. The normal hardness of pure nickel is about 4 GPa. The enhanced hardness of Ni at ultra low temperature is attributed to both mechanisms of reduced grain size strengthening and residual compressive stress hardening.     

Molding and hot forming techniques for fabricating plastic aspheric lenses with high blue-light transmittance

The purpose of this paper is to use micro-electroforming and hot-embossing technology as an alternative to high-cost precision cutting or traditional injection molding in the fabrication of plastic aspheric lenses with high Blu-Ray transmittance. The female dies for the aspheric lenses are fabricated from UV-cured SU-8 polymer via electrostatic attraction. However, SU-8 has a 405 nm Blu-Ray transmittance of only roughly 40–50%, which is not appropriate for use in high-density optical pickup systems. This paper, therefore, uses low stress, low surface roughness, nickel micro-electroforming and molding technologies and employs a micro hot-embossing system to form aspheric lenses with high Blu-Ray transmittance from COC plastic (transmittance: 88% at 405 nm). The resulting lenses have a clear aperture of approximately 1 mm and a numerical aperture of roughly 0.6. The electroforming mold has a roughness of approximately 8 nm as measured by AFM. The roughness of COC (n = 1.53) aspheric lenses after hot-embossing is approximately 146 nm (300 µm × 220 µm) as measured by white light interferometer (WYKO). The shape precision of the hot-embossing COC and original SU-8 (n = 1.67) aspheric lenses can be controlled with approximately 2.638% error. The spot size of the hot-embossed COC and original SU-8 aspheric lenses can be controlled with approximately 11% error. This error should account for the material refractive index difference and the shape error. The roughness and spot size were also tested using different pressing temperatures and forces. This technology could be developed to fabricate lenses in Blu-Ray 405 nm micro-optical systems.     

Performance analysis of the IEEE 802.11 DCF in the presence of the hidden stations

In this paper, we present an analytical model to evaluate the hidden station effect on the performance of the IEEE 802.11 Distributed Coordination Function (DCF) in both non-saturation and saturation condition. DCF is a random channel-access scheme based on Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) method and the exponential backoff procedure. DCF is widely used and can support both wireless network with an access point and ad hoc wireless network because of its random channel-access method. On the other hand, this method unavoidably suffers the hidden station effect that causes significant performance degradation. As shown in this paper, hidden stations occur frequently in real-world settings, and the performance impact on the 802.11 DCF is a significant concern, but it has not been adequately studied. We study this problem through a spatial–temporal analysis and a Markov chain model. Our model generalizes the existing work on the performance modeling of 802.11 DCF for both non-saturation and saturation conditions. The scenario of no hidden station can be considered as a special case in our model. The performance of our model is evaluated by comparison with ns-2 simulations.     

Design of a sliding mode controller for an automatic guided vehicle and its implementation

In this paper, a control scheme that combines a kinematic controller and a sliding mode dynamic controller with external disturbances is proposed for an automatic guided vehicle to track a desired trajectory with a specified constant velocity. It provides a method of taking into account specific mobile robot dynamics to convert desired velocity control inputs into torques for the actual mobile robot. First, velocity control inputs are designed for the kinematic controller to make the tracking error vector asymptotically stable. Then, a sliding mode dynamic controller is designed such that the mobile robot’s velocities converge to the velocity control inputs. The control law is obtained based on the backstepping technique. System stability is proved using the Lyapunov stability theory. In addition, a scheme for measuring the errors using a USB camera is described. The simulation and experimental results are presented to illustrate the effectiveness of the proposed controller.