EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.     

Polymerization of styrene with a simple rare earth metal initiator

The catalytic activity in the polymerization of styrene has been examined using commercially available simple rare earth metal compounds such as Sm(OiPr)₃, Sm(acac)₃, Sm(OCOMe)₃, SmI₂(THF)₂ or SmCl₃ coupled with Et₃Al or methylaluminoxane (MAO). Among these compounds, the Sm(OiPr)₃/AlEt₃ system shows the highest catalytic activity, especially in the presence of a minor amount of toluene at 60 °C. The random copolymerization of styrene with methyl methacrylate suggests that the present polymerization proceeds with a radical polymerization mechanism. (C₅Me₅)SmCl₃Na(THF) and (C₅Me₅)SmCl₃Li(THF) systems exhibit relatively low catalytic activity, even in the presence of AlEt₃. © 2001 Society of Chemical Industry     

Annealing Effect in GaDyN on Optical and Magnetic Properties

The annealing effect on the optical and magnetic properties of the GaDyN layers was studied. The PL intensities of yellow and green bands as well as the intra-4f orbital transition of Dy³⁺ ions were found to decrease for the samples annealed at 900 and 1000 °C. It is supposed that the intra-4f orbital transition is related to the broad peak luminescence coming from defects. Increasing the annealing temperature, the magnetization becomes smaller. It is considerable that the number of electrons coming from defects was reduced by the annealing treatments and that the ferromagnetism in GaDyN is attributed as carrier induced ferromagnetism.     

Genetically engineered active Qbeta replicase in rabbit reticulocyte cell-free system: a fusion protein of EF-Tu and EF-Ts is functional as the subunit of Qbeta replicase

Qbeta replicase functioning in Escherichia coli is an RNA-dependent RNA polymerase composed of one phage-coded subunit and three host-coded proteins: ribosomal protein S1, and protein elongation factors EF-Tu and EF-Ts. Qbeta replicase lacking ribosomal protein S1 (alpha-less replicase) is capable of replicating some small RNAs. We attempted to create functional alpha-less replicase by co-expression of the mRNAs that code for the subunits of alpha-less replicase in a rabbit reticulocyte cell-free translation system. Replicase activity, however, could not be detected when both EF-Tu and EF-Ts were co-expressed with the phage-coded subunit. On the other hand, active alpha-less replicase was obtained when an EF-Ts-EF-Tu fusion protein was co-expressed with the phage-coded subunit. Consequently, we succeeded in generating genetically engineered active alpha-less Qbeta replicase which functions in a eukaryotic cell-free system.     

Alleviation of the two-cell block of ICR mouse embryos by polyaminocarboxylate metal chelators

The present study was undertaken to examine the effects of various transition metal ion chelators, both polyaminocarboxylates (including nitrilotriacetate (NTA), ethylenediaminediacetate (EDDA), ethyleneglycolbistetraacetate (EGTA), ethylenediaminetetraacetate (EDTA) and diethylenetriaminepentaacetate (DTPA)) and non-polyaminocarboxylates (dipicolinic acid and deferoxamine), on the development in vitro of one-cell ICR strain mouse embryos to the four-cell and blastocyst stages. The order of stability constants of polyaminocarboxylates for transition metal ions such as zinc, copper and iron is as follows: NTA < or = EDDA < EGTA < EDTA < DTPA. Addition of 10 or 100 micromol polyaminocarboxylates x l(-1) to the medium significantly enhanced the development of most one-cell embryos (66-88%) beyond the two-cell stage compared with that (< 25%) in medium without polyaminocarboxylates. Although EDDA, EDTA and DTPA at 10 micromol x l(-1) induced the development of most one-cell embryos to the four-cell stage and beyond, a higher concentration (100 micromol x l(-1)) of NTA and EGTA was required to obtain a similar result. Therefore, the ability of polyaminocarboxylates to overcome the two-cell block is not correlated with their potency to chelate transition metal ions. In contrast, the non-polyaminocarboxylates dipicolinic acid and deferoxamine, at 10 and 100 micromol x l(-1), did not have the same effect. Taken together, the results indicate that the ability of polyaminocarboxylates to overcome the two-cell block in embryo development is due to some common feature or features other than the ability to chelate transition metal ions.     

Compact and power‐saving polysilicon data driver with common‐decoder DA converter (CD‐DAC)

Abstract— A common‐decoder architecture for a data‐driver circuit fabricated by using a polysilicon process has been developed. The architecture achieves a compact circuit and low‐power consumption. In application to an integrated polysilicon data driver for small‐sized displays, this architecture reduces the area of the data driver by removing the vertical bus lines that occupy a large area. It also suppresses the power consumption of the data bus by reducing the number of driven lines in the data bus during word‐to‐word transitions from six to two. By using a conventional 4‐μm design rule, we fabricated an active‐matrix OLED (AMOLED) panel with an integrated six‐bit data‐driver circuit with 384 outputs. The driver circuit had a height of 2.6 mm and a pitch between output lines of 84 μm. The maximum power consumption of the driver was only 5 mW, i.e., 3.8 mW for logic‐data transfer and 1.2 mW for reference‐voltage source. Furthermore, we also fabricated an active‐matrix LCD (AMLCD) panel including driver circuits of the same type as the integrated elements. Six‐bit full‐color images were successfully displayed on both panels.     

Chiral separation of amines by high-performance liquid chromatography after tagging with 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1-yl)- 2,1,3-benzoxadiazole

Chiral tagging reagents, 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1 -yl)-2,1,3- benzoxadiazole (R(+)-DBD-Pro-COCl and S(-)-DBD-Pro-COCl), react with mirror image enantiomers of amines to produce corresponding diastereomers in the presence of pyridine as a catalyst. The maximal excitation and emission wavelengths of the resulting diastereomers were ca. 450 nm and 560 nm, respectively. The diastereomers derived from some aliphatic amines were resolved by a reversed-phase chromatography with water-acetonitrile or normal-phase chromatography with n-hexane-ethyl acetate as the eluent. The reactivities of both enantiomers of DBD-Pro-COCl to chiral amines were almost comparable, whereas a slight difference of fluorescence intensity was observed with S(-)-DBD-Pro-COCl. When (S-)-DBD-Pro-COCl was used as the derivatization reagent, amines corresponding to S-configuration were eluted faster than R-configuration. The opposite elution order was obtained with the use of R(+)-DBD-Pro-COCl, instead of S(-)-DBD-Pro-COCl. The Rs values obtained from 1-cyclohexylethylamine (CEA) having aliphatic ring structure was larger than those of amines (1-(1-naphthyl)ethylamine (NEA) and 1-phenylethylamine (PEA)) having aromatic ring structures.