Ring opening polymerization of 2,5-dihydro-2,5-dimethoxyfuran by electrochemical initiation

Summary 2,5-Dihydro-2,5-dimethoxyfuran (DHMF) was polymerized via constant current electrolysis (CCE), in CH₃CN-NaClO₄ solvent-electrolyte couple. Poly(DHMF) was obtained from the anolyte. The effect of current density, temperature, monomer and electrolyte concentrations on the polymer yield have been examined. The apparent activation energy for CCE of DHMF was found to be 37.2 kj/mol. The FTIR and ¹H-NMR analyses show that DHMF polymerizes by a ring opening. Molecular weight of poly(DHMF) was found by using cryoscopy.     

Preparation of laurel oil alkanolamide from laurel oil

A low-temperature synthesis of laurel oil alkanolamides directly from laurel oil and ethanolamine was carried out in essentially quantitative yields. The ethanolamine/laurel oil molar ratio used was 10∶1. Even though amine served as a catalyst in the reaction, we used sodium methoxide at a ratio of 0.2–2% as a second catalyst. The reaction was complete in 1–9 h at room temperature. The identity of the amide was confirmed by IR and ¹³C NMR spectroscopy.     

Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers

This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture bases (HCS and APS). Bond strength was tested in tension according to ADA specification No.15. The results showed that the HC group failed cohesively because of higher interface bonding (49.95 MPa) compared with those of the others (AP: 25.41 MPa; MC: 22.06 MPa; MI: 20.02 MPa). The application of dichloromethane improved bond strengths of HCS and APS groups (60.61 and 32.03 MPa, respectively). It was suggested that dichloromethane could be applied on the denture teeth ridge lap area prior to denture base processing to enhance adhesion between the tooth/resin.     

Rheological and Microscopic Properties of Fat Blends with Similar Solid Fat Content but Different Trans Composition

In this study, two different groups of fat samples were prepared in a way that samples of each group had different trans fatty acid (TFA) composition but similar solid fat content (SFC). Samples of the first group (named group A) had TFA between 0.0 and 56.23 %, while the samples of the second group (group B) contained trans isomers ranging from 0.0 to 44.4 %. A polarized microscope was used to monitor the differences between the samples in terms of crystal size and crystal number during isothermal crystallization. In general, increasing TFA resulted in formation of larger crystals in a shorter time. Similar findings were also observed when small deformation time and frequency sweep experiments were conducted. A higher TFA content led to higher complex modulus values during isothermal crystallization. On the other hand, when the samples were stored at 4 °C for 48 h, the samples with the lower trans isomer had higher hardness values.     

Alginate/BSA/montmorillonite composites with enhanced protein entrapment and controlled release efficiency

Novel pH sensitive alginate–protein–clay composite beads were investigated for the in vitro oral delivery of the model protein, bovine serum albumin (BSA). X-ray diffraction (XRD) results revealed that BSA enter between layers of montmorillonite (MMT) by expanding interlayer distance and finally an exfoliated structure forms in the alginate hydrogel. MMT incorporation increases protein entrapment efficiency to 78%, compared to 40% of conventional alginate beads. The release ratio of BSA from composite beads is 9–13% depending on MMT contents after around a 2 h stay in gastric fluid. More importantly, no BSA release is detected until 60–90 min after the first contact time of beads with gastric solution. The presence of clay in alginate beads prevents burst release in higher pH of intestine by slowing release rate of BSA to 45–55% within around 9 h, resulting in a potential matrix for intestinal release of protein drugs.     

Synergistic effects of sono-alkaline pretreatment on anaerobic biodegradability of waste activated sludge

The individual and combined effects of alkaline and ultrasonic pretreatment on both physical and chemical properties and anaerobic biodegradability of waste activated sludge (WAS) were investigated comprehensively in this study. The experimental results showed that both disintegration and anaerobic biodegradability of WAS were significantly improved by the combination of alkaline and ultrasonic (sono-alkaline) pretreatment. Besides, it was determined that the hydraulic retention time in anaerobic digester can be shortened by half using this combined pretreatment. However, it was also determined that sono-alkaline pretreatment was not feasible economically due to its high energy requirement.     

Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit

A raw material grinding circuit was modeled using plant data. Samples were collected from around the circuit and, following a crash stop, from inside the mill. The size distributions of the samples were determined down to a few microns. Using the data from inside the mill a modeling approach, based on perfect mixing, was developed. The modelling approach implicitly assumes that the mixture of feed materials broken is homogenous from the breakage point of view. The air classification around the circuit was modeled using the efficiency curve approach. In order to measure the success of the method the circuit performance was predicted by simulation studies while it was operating at different conditions. The results were then compared with the measured data. It is concluded that modeling gives a useful quantitative indication of what may occur in fully air swept mills.     

A microfluidic toolbox for cell fusion

Cellular fusion is a key process in many fields ranging from historical gene mapping studies and monoclonal antibody production, through to cell reprogramming. Traditional methodologies for cell fusion rely on the random pairing of different cell types and generally result in low and variable fusion efficiencies. These approaches become particularly limiting where substantial numbers of bespoke one‐to‐one fusions are required, for example, for in‐depth studies of nuclear reprogramming mechanisms. In recent years, microfluidic technologies have proven valuable in creating platforms where the manipulation of single cells is highly efficient, rapid and controllable. These technologies also allow the integration of different experimental steps and characterisation processes into a single platform. Although the application of microfluidic methodologies to cell fusion studies is promising, current technologies that rely on static trapping are limited both in terms of the overall number of fused cells produced and their experimental accessibility. Here we review some of the most exciting breakthroughs in core microfluidic technologies that will allow the creation of integrated platforms for controlled cell fusion at high throughput. © 2015 Society of Chemical Industry     

Effects of Some Metals and Chelating Agents on Patulin Degradation by Ozone

The efficiency of ozone treatment for degradation of the mycotoxin patulin in the presence of various metal ions was evaluated in model systems. An initial patulin concentration of 250 μg/L was ozonated and residual ozone concentration was about 0.17±0.01 mg/L at the end of the experiment. Patulin showed a weak resistance to ozone, because up to 98% of this toxin was oxidized in only one minute. Degradation rates in the presence of calcium, aluminum, copper and zinc were almost the same in the absence of these metals. However, degradation of patulin was reduced from 98 to 37% when the concentration of manganese increased from 0 to 3 mg/L. Patulin was almost completely degraded in the absence of iron, while the degradation was only 8.5% in the presence of 0.5 mg/L of iron. These results have revealed that manganese and iron significantly reduce the detoxification of patulin by ozone. Agents such as ethylenediaminetetraacetic acid and sodium polyphosphate effectively chelated iron and increased the degradation rate of patulin. None of the tested agents were able to chelate manganese and to enhance patulin degradation by ozone.     

Preconcentration and matrix elimination for the determination of Pb(II), Cd(II), Ni(II), and Co(II)by 8‐hydroxyquinoline anchored poly(styrene‐divinylbenzene) microbeads

Poly(styrene-divinylbenzene), PS-DVB, microbeads were modified with 8-hydroxyquinoline (8-HQ) following nitration, reduction of  NO₂ to NH₂, and conversion of NH₂ to diazonium salt. Characterization of pristine,  NO₂,  NH₂,  NN⁺Cl⁻, and 8-QH functional groups modified microbeads was made by Fourier transform-infrared spectrometry (FTIR) and porosimetry. Total reflectron-X-ray florescence spectrometer (TXRF) was used to test the affinity of the 8-HQ modified microbeads to toxic metal ions. 8-HQ-modified microbeads were used to examine the adsorption capacity, recovery, preconcentration, and the matrix elimination efficiency for Pb(II), Cd(II), Ni(II), and Co(II) ions as a function of changing pH, initial metal-ion concentrations, and also equilibrium adsorption time of the studied metal ions. Preconcentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery between 93.8% and 100.6%. Ultratrace toxic metal-ion concentrations in sea water were determined easily by using modified microbeads. Reference sea-water sample was used for the validation of the method, and it was found that recovery, preconcentration, and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3M of HNO₃ was used and desorption ratio shown to be more than 96%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008